Re: [PATCH v3 2/6] firmware: arm_scmi: add SCMIv3.0 Sensors descriptors extensions
From: Sudeep Holla
Date: Thu Nov 19 2020 - 06:39:33 EST
On Wed, Nov 18, 2020 at 04:29:01PM +0000, Cristian Marussi wrote:
> Add support for new SCMIv3.0 Sensors extensions related to new sensors'
> features, like multiple axis and update intervals, while keeping
> compatibility with SCMIv2.0 features.
> While at that, refactor and simplify all the internal helpers macros and
> move struct scmi_sensor_info to use only non-fixed-size typing.
>
Sorry for late review.
> Signed-off-by: Cristian Marussi <cristian.marussi@xxxxxxx>
> ---
> v2 --> v3
> - Fix SCMI_MAX_NUM_SENSOR_AXIS
> - added missing Dox comment in resolution
> - added common INTVL SEGMENT macros
>
> v1 --> v2
> - restrict segmented intervals descriptors to single triplet
> - add proper usage of scmi_reset_rx_to_maxsz
> ---
> drivers/firmware/arm_scmi/sensors.c | 391 ++++++++++++++++++++++++++--
> include/linux/scmi_protocol.h | 223 +++++++++++++++-
> 2 files changed, 588 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
> index 6aaff478d032..1c83aaae0012 100644
> --- a/drivers/firmware/arm_scmi/sensors.c
> +++ b/drivers/firmware/arm_scmi/sensors.c
> @@ -7,16 +7,21 @@
>
> #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt
>
> +#include <linux/bitfield.h>
> #include <linux/scmi_protocol.h>
>
> #include "common.h"
> #include "notify.h"
>
> +#define SCMI_MAX_NUM_SENSOR_AXIS 63
> +
> enum scmi_sensor_protocol_cmd {
> SENSOR_DESCRIPTION_GET = 0x3,
> SENSOR_TRIP_POINT_NOTIFY = 0x4,
> SENSOR_TRIP_POINT_CONFIG = 0x5,
> SENSOR_READING_GET = 0x6,
> + SENSOR_AXIS_DESCRIPTION_GET = 0x7,
> + SENSOR_LIST_UPDATE_INTERVALS = 0x8,
> };
>
> struct scmi_msg_resp_sensor_attributes {
> @@ -28,23 +33,102 @@ struct scmi_msg_resp_sensor_attributes {
> __le32 reg_size;
> };
>
> +/* v3 attributes_low macros */
> +#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x))
> +#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x))
> +#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x))
> +#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x))
> +
> +/* v2 attributes_high macros */
> +#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x))
> +#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x))
> +
> +/* v3 attributes_high macros */
> +#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x))
> +#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x))
> +
> +/* v3 resolution macros */
> +#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x))
> +#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x))
> +
> +struct scmi_range_attrs_le {
[nit] Does "_le" above indicate little endian ? If so, please drop it here
and elsewhere in the series as it is not consistent with other structure
names. LE is assumed throughout SCMI.
> + __le32 min_range_low;
> + __le32 min_range_high;
> + __le32 max_range_low;
> + __le32 max_range_high;
> +};
> +
> struct scmi_msg_resp_sensor_description {
> __le16 num_returned;
> __le16 num_remaining;
> - struct {
> + struct scmi_sensor_descriptor {
> __le32 id;
> __le32 attributes_low;
> -#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31))
> -#define NUM_TRIP_POINTS(x) ((x) & 0xff)
> +/* Common attributes_low macros */
> +#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x))
> +#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x))
> __le32 attributes_high;
> -#define SENSOR_TYPE(x) ((x) & 0xff)
> -#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f)
> -#define SENSOR_SCALE_SIGN BIT(4)
> -#define SENSOR_SCALE_EXTEND GENMASK(7, 5)
> -#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f)
> -#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f)
> - u8 name[SCMI_MAX_STR_SIZE];
> - } desc[0];
> +/* Common attributes_high macros */
> +#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x))
> +#define SENSOR_SCALE_SIGN BIT(4)
> +#define SENSOR_SCALE_EXTEND GENMASK(31, 5)
> +#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x))
> + u8 name[SCMI_MAX_STR_SIZE];
> + /* only for version > 2.0 */
> + __le32 power;
> + __le32 resolution;
> + struct scmi_range_attrs_le scalar_attrs;
> + } desc[];
> +};
> +
> +/* Sign extend to a full s32 */
> +#define S32_EXT(v) \
> + ({ \
> + int __v = (v); \
> + \
> + if (__v & SENSOR_SCALE_SIGN) \
> + __v |= SENSOR_SCALE_EXTEND; \
> + __v; \
> + })
> +
> +#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ \
> + (sizeof(struct scmi_sensor_descriptor) - \
> + (2 * sizeof(__le32)) - sizeof(struct scmi_range_attrs_le))
Why can't we just hardcode the offset ? This needs changes when we modify
the structure in future for additional elements right ?
> +
> +struct scmi_msg_sensor_axis_description_get {
> + __le32 id;
> + __le32 axis_desc_index;
> +};
> +
> +struct scmi_msg_resp_sensor_axis_description {
> + __le32 num_axis_flags;
> +#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x))
> +#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x))
> + struct scmi_axis_descriptor {
> + __le32 id;
> + __le32 attributes_low;
> + __le32 attributes_high;
> + u8 name[SCMI_MAX_STR_SIZE];
> + __le32 resolution;
> + struct scmi_range_attrs_le attrs;
> + } desc[];
> +};
> +
> +#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ \
> + (sizeof(struct scmi_axis_descriptor) - \
> + sizeof(__le32) - sizeof(struct scmi_range_attrs_le))
> +
> +struct scmi_msg_sensor_list_update_intervals {
> + __le32 id;
> + __le32 index;
> +};
> +
> +struct scmi_msg_resp_sensor_list_update_intervals {
> + __le32 num_intervals_flags;
> +#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x))
> +#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x))
> +#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x))
> + __le32 intervals[];
> };
>
> struct scmi_msg_sensor_trip_point_notify {
> @@ -114,6 +198,194 @@ static int scmi_sensor_attributes_get(const struct scmi_handle *handle,
> return ret;
> }
>
> +static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out,
> + struct scmi_range_attrs_le *in)
> +{
> + out->min_range = get_unaligned_le64((void *)&in->min_range_low);
> + out->max_range = get_unaligned_le64((void *)&in->max_range_low);
> +}
> +
> +static int scmi_sensor_update_intervals(const struct scmi_handle *handle,
> + struct scmi_sensor_info *s)
> +{
> + int ret, cnt;
> + u32 desc_index = 0;
> + u16 num_returned, num_remaining;
> + struct scmi_xfer *ti;
> + struct scmi_msg_resp_sensor_list_update_intervals *buf;
> + struct scmi_msg_sensor_list_update_intervals *msg;
> +
> + ret = scmi_xfer_get_init(handle, SENSOR_LIST_UPDATE_INTERVALS,
> + SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &ti);
> + if (ret)
> + return ret;
> +
> + buf = ti->rx.buf;
> + do {
> + u32 flags;
> +
> + msg = ti->tx.buf;
> + /* Set the number of sensors to be skipped/already read */
> + msg->id = cpu_to_le32(s->id);
> + msg->index = cpu_to_le32(desc_index);
> +
> + ret = scmi_do_xfer(handle, ti);
> + if (ret)
> + break;
> +
> + flags = le32_to_cpu(buf->num_intervals_flags);
> + num_returned = NUM_INTERVALS_RETURNED(flags);
> + num_remaining = NUM_INTERVALS_REMAINING(flags);
> +
> + /*
> + * Max intervals is not declared previously anywhere so we
> + * assume it's returned+remaining.
> + */
> + if (!s->intervals.count) {
> + s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags);
> + s->intervals.count = num_returned + num_remaining;
> + /* segmented intervals are reported in one triplet */
> + if (s->intervals.segmented &&
> + (num_remaining || num_returned != 3)) {
> + dev_err(handle->dev,
> + "Sensor ID:%d advertises an invalid segmented interval (%d)\n",
> + s->id, s->intervals.count);
> + s->intervals.segmented = false;
> + s->intervals.count = 0;
> + ret = -EINVAL;
> + break;
> + }
> + /* Direct allocation when exceeding pre-allocated */
> + if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) {
> + s->intervals.desc =
> + devm_kcalloc(handle->dev,
> + s->intervals.count,
> + sizeof(*s->intervals.desc),
> + GFP_KERNEL);
> + if (!s->intervals.desc) {
> + s->intervals.segmented = false;
> + s->intervals.count = 0;
> + ret = -ENOMEM;
> + break;
> + }
> + }
> + } else if (desc_index + num_returned > s->intervals.count) {
> + dev_err(handle->dev,
> + "No. of update intervals can't exceed %d\n",
> + s->intervals.count);
> + ret = -EINVAL;
> + break;
> + }
> +
> + for (cnt = 0; cnt < num_returned; cnt++)
> + s->intervals.desc[desc_index + cnt] =
> + le32_to_cpu(buf->intervals[cnt]);
> +
> + desc_index += num_returned;
> +
> + scmi_reset_rx_to_maxsz(handle, ti);
> + /*
> + * check for both returned and remaining to avoid infinite
> + * loop due to buggy firmware
> + */
> + } while (num_returned && num_remaining);
> +
> + scmi_xfer_put(handle, ti);
> + return ret;
> +}
> +
> +static int scmi_sensor_axis_description(const struct scmi_handle *handle,
> + struct scmi_sensor_info *s)
> +{
> + int ret, cnt;
> + u32 desc_index = 0;
> + u16 num_returned, num_remaining;
> + struct scmi_xfer *te;
> + struct scmi_msg_resp_sensor_axis_description *buf;
> + struct scmi_msg_sensor_axis_description_get *msg;
> +
> + s->axis = devm_kcalloc(handle->dev, s->num_axis,
> + sizeof(*s->axis), GFP_KERNEL);
> + if (!s->axis)
> + return -ENOMEM;
> +
> + ret = scmi_xfer_get_init(handle, SENSOR_AXIS_DESCRIPTION_GET,
> + SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &te);
> + if (ret)
> + return ret;
> +
> + buf = te->rx.buf;
> + do {
> + u32 flags;
> + struct scmi_axis_descriptor *adesc;
> +
> + msg = te->tx.buf;
> + /* Set the number of sensors to be skipped/already read */
> + msg->id = cpu_to_le32(s->id);
> + msg->axis_desc_index = cpu_to_le32(desc_index);
> +
> + ret = scmi_do_xfer(handle, te);
> + if (ret)
> + break;
> +
> + flags = le32_to_cpu(buf->num_axis_flags);
> + num_returned = NUM_AXIS_RETURNED(flags);
> + num_remaining = NUM_AXIS_REMAINING(flags);
> +
> + if (desc_index + num_returned > s->num_axis) {
> + dev_err(handle->dev, "No. of axis can't exceed %d\n",
> + s->num_axis);
> + break;
> + }
> +
> + adesc = &buf->desc[0];
> + for (cnt = 0; cnt < num_returned; cnt++) {
> + u32 attrh, attrl;
> + struct scmi_sensor_axis_info *a;
> + size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ;
> +
> + attrl = le32_to_cpu(adesc->attributes_low);
> +
> + a = &s->axis[desc_index + cnt];
> +
> + a->id = le32_to_cpu(adesc->id);
> + a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);
> +
> + attrh = le32_to_cpu(adesc->attributes_high);
> + a->scale = S32_EXT(SENSOR_SCALE(attrh));
> + a->type = SENSOR_TYPE(attrh);
> + strlcpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
> +
> + if (a->extended_attrs) {
> + unsigned int ares =
> + le32_to_cpu(adesc->resolution);
> +
> + a->resolution = SENSOR_RES(ares);
> + a->exponent =
> + S32_EXT(SENSOR_RES_EXP(ares));
> + dsize += sizeof(adesc->resolution);
> +
> + scmi_parse_range_attrs(&a->attrs,
> + &adesc->attrs);
> + dsize += sizeof(adesc->attrs);
> + }
> +
> + adesc = (typeof(adesc))((u8 *)adesc + dsize);
Just thinking if we can avoid this my having union comprising of v1 and v2
structures ?
> + }
> +
> + desc_index += num_returned;
> +
> + scmi_reset_rx_to_maxsz(handle, te);
> + /*
> + * check for both returned and remaining to avoid infinite
> + * loop due to buggy firmware
> + */
> + } while (num_returned && num_remaining);
> +
> + scmi_xfer_put(handle, te);
> + return ret;
> +}
> +
> static int scmi_sensor_description_get(const struct scmi_handle *handle,
> struct sensors_info *si)
> {
> @@ -131,9 +403,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
> buf = t->rx.buf;
>
> do {
> + struct scmi_sensor_descriptor *sdesc;
> +
> /* Set the number of sensors to be skipped/already read */
> put_unaligned_le32(desc_index, t->tx.buf);
> -
> ret = scmi_do_xfer(handle, t);
> if (ret)
> break;
> @@ -147,22 +420,97 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
> break;
> }
>
> + sdesc = &buf->desc[0];
> for (cnt = 0; cnt < num_returned; cnt++) {
> u32 attrh, attrl;
> struct scmi_sensor_info *s;
> + size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ;
>
> - attrl = le32_to_cpu(buf->desc[cnt].attributes_low);
> - attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
> s = &si->sensors[desc_index + cnt];
> - s->id = le32_to_cpu(buf->desc[cnt].id);
> - s->type = SENSOR_TYPE(attrh);
> - s->scale = SENSOR_SCALE(attrh);
> - /* Sign extend to a full s8 */
> - if (s->scale & SENSOR_SCALE_SIGN)
> - s->scale |= SENSOR_SCALE_EXTEND;
> + s->id = le32_to_cpu(sdesc->id);
> +
> + attrl = le32_to_cpu(sdesc->attributes_low);
> + /* common bitfields parsing */
> s->async = SUPPORTS_ASYNC_READ(attrl);
> s->num_trip_points = NUM_TRIP_POINTS(attrl);
> - strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
> + /**
> + * only v3.0 specific bitfield below.
> + * Such bitfields are assumed to be zeroed on non
> + * relevant fw versions...assuming fw not buggy !
> + */
> + s->update = SUPPORTS_UPDATE_NOTIFY(attrl);
> + s->timestamped = SUPPORTS_TIMESTAMP(attrl);
> + if (s->timestamped)
> + s->tstamp_scale =
> + S32_EXT(SENSOR_TSTAMP_EXP(attrl));
> + s->extended_scalar_attrs =
> + SUPPORTS_EXTEND_ATTRS(attrl);
> +
> + attrh = le32_to_cpu(sdesc->attributes_high);
> + /* common bitfields parsing */
> + s->scale = S32_EXT(SENSOR_SCALE(attrh));
> + s->type = SENSOR_TYPE(attrh);
> + /* Use pre-allocated pool wherever possible */
> + s->intervals.desc = s->intervals.prealloc_pool;
> + if (si->version == 0x10000) {
> + s->intervals.segmented = false;
> + s->intervals.count = 1;
> + /*
> + * Convert SCMIv2.0 update interval format to
> + * SCMIv3.0 to be used as the common exposed
> + * descriptor, accessible via common macros.
> + */
> + s->intervals.desc[0] =
> + (SENSOR_UPDATE_BASE(attrh) << 5) |
> + SENSOR_UPDATE_SCALE(attrh);
> + } else {
> + /*
> + * From version v3.0 update intervals are
The version comment might be confusing and the check for si->version.
We need to clarify until SCMIv3.0, sensor protocol version = v1.0 and
it is v2.0 from SCMI v3.0 onwards.
> + * retrieved via a dedicated (optional) command.
> + * Since the command is optional, on error carry
> + * on without any update interval.
> + */
> + if (scmi_sensor_update_intervals(handle, s))
> + dev_info(handle->dev,
> + "Update Intervals not available for sensor ID:%d\n",
> + s->id);
Can we drop the logging or make it _dbg ? Make flood in a system with 100s of
sensors.
> + }
> + /**
> + * only > v2.0 specific bitfield below.
> + * Such bitfields are assumed to be zeroed on non
> + * relevant fw versions...assuming fw not buggy !
> + */
> + s->num_axis = min_t(unsigned int,
> + SUPPORTS_AXIS(attrh) ?
> + SENSOR_AXIS_NUMBER(attrh) : 0,
> + SCMI_MAX_NUM_SENSOR_AXIS);
> + strlcpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
> +
> + if (s->extended_scalar_attrs) {
> + s->sensor_power = le32_to_cpu(sdesc->power);
> + dsize += sizeof(sdesc->power);
> + /* Only for sensors reporting scalar values */
> + if (s->num_axis == 0) {
> + unsigned int sres =
> + le32_to_cpu(sdesc->resolution);
> +
> + s->resolution = SENSOR_RES(sres);
> + s->exponent =
> + S32_EXT(SENSOR_RES_EXP(sres));
> + dsize += sizeof(sdesc->resolution);
> +
> + scmi_parse_range_attrs(&s->scalar_attrs,
> + &sdesc->scalar_attrs);
> + dsize += sizeof(sdesc->scalar_attrs);
> + }
> + }
> + if (s->num_axis > 0) {
> + ret = scmi_sensor_axis_description(handle, s);
> + if (ret)
> + goto out;
> + }
> +
> + sdesc = (typeof(sdesc))((u8 *)sdesc + dsize);
> }
>
> desc_index += num_returned;
> @@ -174,6 +522,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
> */
> } while (num_returned && num_remaining);
>
> +out:
> scmi_xfer_put(handle, t);
> return ret;
> }
> diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
> index 9cd312a1ff92..53cc5ce0e494 100644
> --- a/include/linux/scmi_protocol.h
> +++ b/include/linux/scmi_protocol.h
> @@ -8,6 +8,7 @@
> #ifndef _LINUX_SCMI_PROTOCOL_H
> #define _LINUX_SCMI_PROTOCOL_H
>
> +#include <linux/bitfield.h>
> #include <linux/device.h>
> #include <linux/notifier.h>
> #include <linux/types.h>
> @@ -148,26 +149,238 @@ struct scmi_power_ops {
> u32 *state);
> };
>
> +/**
> + * scmi_range_attrs - specifies a sensor or axis values' range
> + * @min_range: The minimum value which can be represented by the sensor/axis.
> + * @max_range: The maximum value which can be represented by the sensor/axis.
> + */
> +struct scmi_range_attrs {
> + long long min_range;
> + long long max_range;
> +};
> +
> +/**
> + * scmi_sensor_axis_info - describes one sensor axes
> + * @id: The axes ID.
> + * @type: Axes type. Chosen amongst one of @enum scmi_sensor_class.
> + * @scale: Power-of-10 multiplier applied to the axis unit.
> + * @name: NULL-terminated string representing axes name as advertised by
> + * SCMI platform.
> + * @extended_attrs: Flag to indicate the presence of additional extended
> + * attributes for this axes.
> + * @resolution: Extended attribute representing the resolution of the axes.
> + * Set to 0 if not reported by this axes.
> + * @exponent: Extended attribute representing the power-of-10 multiplier that
> + * is applied to the resolution field. Set to 0 if not reported by
> + * this axes.
> + * @attrs: Extended attributes representing minimum and maximum values
> + * measurable by this axes. Set to 0 if not reported by this sensor.
> + */
> +struct scmi_sensor_axis_info {
> + unsigned int id;
> + unsigned int type;
> + int scale;
> + char name[SCMI_MAX_STR_SIZE];
> + bool extended_attrs;
> + unsigned int resolution;
> + int exponent;
> + struct scmi_range_attrs attrs;
> +};
> +
> +/**
> + * scmi_sensor_intervals_info - describes number and type of available update
> + * intervals
> + * @segmented: Flag for segmented intervals' representation. When True there
> + * will be exactly 3 intervals in @desc, with each entry
> + * representing a member of a segment in this order:
> + * {lowest update interval, highest update interval, step size}
> + * @count: Number of intervals described in @desc.
> + * @desc: Array of @count interval descriptor bitmask represented as detailed in
> + * the SCMI specification: it can be accessed using the accompanying
> + * macros.
> + * @prealloc_pool: A minimal preallocated pool of desc entries used to avoid
> + * lesser-than-64-bytes dynamic allocation for small @count
> + * values.
> + */
> +struct scmi_sensor_intervals_info {
> + bool segmented;
> + unsigned int count;
> +#define SCMI_SENS_INTVL_SEGMENT_LOW 0
> +#define SCMI_SENS_INTVL_SEGMENT_HIGH 1
> +#define SCMI_SENS_INTVL_SEGMENT_STEP 2
> + unsigned int *desc;
> +#define SCMI_SENS_INTVL_GET_SECS(x) FIELD_GET(GENMASK(20, 5), (x))
> +#define SCMI_SENS_INTVL_GET_EXP(x) \
> + ({ \
> + int __signed_exp = FIELD_GET(GENMASK(4, 0), (x)); \
> + \
> + if (__signed_exp & BIT(4)) \
> + __signed_exp |= GENMASK(31, 5); \
> + __signed_exp; \
> + })
> +#define SCMI_MAX_PREALLOC_POOL 16
> + unsigned int prealloc_pool[SCMI_MAX_PREALLOC_POOL];
> +};
> +
> +/**
> + * struct scmi_sensor_info - represents information related to one of the
> + * available sensors.
> + * @id: Sensor ID.
> + * @type: Sensor type. Chosen amongst one of @enum scmi_sensor_class.
> + * @scale: Power-of-10 multiplier applied to the sensor unit.
> + * @num_trip_points: Number of maximum configurable trip points.
> + * @async: Flag for asynchronous read support.
> + * @update: Flag for continuouos update notification support.
> + * @timestamped: Flag for timestamped read support.
> + * @tstamp_scale: Power-of-10 multiplier applied to the sensor timestamps to
> + * represent it in seconds.
> + * @num_axis: Number of supported axis if any. Reported as 0 for scalar sensors.
> + * @axis: Pointer to an array of @num_axis descriptors.
> + * @intervals: Descriptor of available update intervals.
> + * @sensor_config: A bitmask reporting the current sensor configuration as
> + * detailed in the SCMI specification: it can accessed and
> + * modified through the accompanying macros.
> + * @name: NULL-terminated string representing sensor name as advertised by
> + * SCMI platform.
> + * @extended_scalar_attrs: Flag to indicate the presence of additional extended
> + * attributes for this sensor.
> + * @sensor_power: Extended attribute representing the average power
> + * consumed by the sensor in microwatts (uW) when it is active.
> + * Reported here only for scalar sensors.
> + * Set to 0 if not reported by this sensor.
> + * @resolution: Extended attribute representing the resolution of the sensor.
> + * Reported here only for scalar sensors.
> + * Set to 0 if not reported by this sensor.
> + * @exponent: Extended attribute representing the power-of-10 multiplier that is
> + * applied to the resolution field.
> + * Reported here only for scalar sensors.
> + * Set to 0 if not reported by this sensor.
> + * @scalar_attrs: Extended attributes representing minimum and maximum
> + * measurable values by this sensor.
> + * Reported here only for scalar sensors.
> + * Set to 0 if not reported by this sensor.
> + */
> struct scmi_sensor_info {
> - u32 id;
> - u8 type;
> - s8 scale;
> - u8 num_trip_points;
> + unsigned int id;
> + unsigned int type;
> + int scale;
> + unsigned int num_trip_points;
> bool async;
> + bool update;
> + bool timestamped;
> + int tstamp_scale;
> + unsigned int num_axis;
> + struct scmi_sensor_axis_info *axis;
> + struct scmi_sensor_intervals_info intervals;
> char name[SCMI_MAX_STR_SIZE];
> + bool extended_scalar_attrs;
> + unsigned int sensor_power;
> + unsigned int resolution;
> + int exponent;
> + struct scmi_range_attrs scalar_attrs;
> };
>
Below changes can go in a separate patch as it is just update of entires
as per latest SCMIv2.0 spec and not entirely related to v3.0.
> /*
> * Partial list from Distributed Management Task Force (DMTF) specification:
> - * DSP0249 (Platform Level Data Model specification)
> + * DSP0248 (Platform Level Data Model for Platform Monitoring and Control
> + * specification)
> */
--
Regards,
Sudeep