Re: [PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI

From: Andy Shevchenko
Date: Thu Nov 19 2020 - 10:08:10 EST


On Thu, Nov 19, 2020 at 12:02 PM Alexandru Ardelean
<alexandru.ardelean@xxxxxxxxxx> wrote:
>
> This change converts the configuration of the dual-channel mode from the
> old platform-data, to the device_property_present() function, which
> supports both device-tree and ACPI configuration setups.
>
> With this change the old platform_data include of the driver can be
> removed.

I mostly like the part of getting rid of legacy platform data.
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
(for patches 1-3 only)

> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> ---
>
> I'm wondering if this changeset is what was in mind here:
> https://lore.kernel.org/linux-iio/CA+U=DsqF5tu8Be9KXeyCWD2uHvV688Nc3n=z_Xi2J6H6DFJPRQ@xxxxxxxxxxxxxx/T/#mbe72e4da3acea3899d0d35402ea81e52a9bc34e6
> This driver could have been simplified/reduced a whole lot more, but I'm
> not sure about it. It's a bit of patch-noise, and later
>
> Changelog v1 -> v2:
> * dropped patch 'iio: adc: ad7887: convert driver to full DT probing'
> not adding the device_get_match_data() logic anymore
> * added patch 'iio: adc: ad7887: remove matching code from driver'
> hooking the chip info directly to AD7887
> * added patch 'iio: adc: ad7887: add OF match table'
> this just adds an OF table for DT and ACPI
>
> drivers/iio/adc/ad7887.c | 10 +++++-----
> include/linux/platform_data/ad7887.h | 21 ---------------------
> 2 files changed, 5 insertions(+), 26 deletions(-)
> delete mode 100644 include/linux/platform_data/ad7887.h
>
> diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
> index 4f6f0e0e03ee..06f684c053a0 100644
> --- a/drivers/iio/adc/ad7887.c
> +++ b/drivers/iio/adc/ad7887.c
> @@ -23,8 +23,6 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/iio/triggered_buffer.h>
>
> -#include <linux/platform_data/ad7887.h>
> -
> #define AD7887_REF_DIS BIT(5) /* on-chip reference disable */
> #define AD7887_DUAL BIT(4) /* dual-channel mode */
> #define AD7887_CH_AIN1 BIT(3) /* convert on channel 1, DUAL=1 */
> @@ -241,9 +239,9 @@ static void ad7887_reg_disable(void *data)
>
> static int ad7887_probe(struct spi_device *spi)
> {
> - struct ad7887_platform_data *pdata = spi->dev.platform_data;
> struct ad7887_state *st;
> struct iio_dev *indio_dev;
> + bool dual_mode;
> uint8_t mode;
> int ret;
>
> @@ -286,7 +284,9 @@ static int ad7887_probe(struct spi_device *spi)
> mode = AD7887_PM_MODE4;
> if (!st->reg)
> mode |= AD7887_REF_DIS;
> - if (pdata && pdata->en_dual)
> +
> + dual_mode = device_property_present(&spi->dev, "adi,dual-channel-mode");
> + if (dual_mode)
> mode |= AD7887_DUAL;
>
> st->tx_cmd_buf[0] = AD7887_CH_AIN0 | mode;
> @@ -298,7 +298,7 @@ static int ad7887_probe(struct spi_device *spi)
> spi_message_init(&st->msg[AD7887_CH0]);
> spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]);
>
> - if (pdata && pdata->en_dual) {
> + if (dual_mode) {
> st->tx_cmd_buf[2] = AD7887_CH_AIN1 | mode;
>
> st->xfer[1].rx_buf = &st->data[0];
> diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h
> deleted file mode 100644
> index 9b4dca6ae70b..000000000000
> --- a/include/linux/platform_data/ad7887.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * AD7887 SPI ADC driver
> - *
> - * Copyright 2010 Analog Devices Inc.
> - */
> -#ifndef IIO_ADC_AD7887_H_
> -#define IIO_ADC_AD7887_H_
> -
> -/**
> - * struct ad7887_platform_data - AD7887 ADC driver platform data
> - * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the
> - * second input channel, and Vref is internally connected to Vdd. If set to
> - * false the device is used in single channel mode and AIN1/Vref is used as
> - * VREF input.
> - */
> -struct ad7887_platform_data {
> - bool en_dual;
> -};
> -
> -#endif /* IIO_ADC_AD7887_H_ */
> --
> 2.17.1
>


--
With Best Regards,
Andy Shevchenko