[PATCH v2] mdio_bus: suppress err message for reset gpio EPROBE_DEFER

[Grygorii Strashko]

The mdio_bus may have dependencies from GPIO controller and so got
deferred. Now it will print error message every time -EPROBE_DEFER is
returned which from:
__mdiobus_register()
 |-devm_gpiod_get_optional()
without actually identifying error code.

"mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO"

Hence, suppress error message for devm_gpiod_get_optional() returning
-EPROBE_DEFER case by using dev_err_probe().

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
 drivers/net/phy/mdio_bus.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 757e950fb745..83cd61c3dd01 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -546,10 +546,10 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	/* de-assert bus level PHY GPIO reset */
 	gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod)) {
-		dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n",
-			bus->id);
+		err = dev_err_probe(&bus->dev, PTR_ERR(gpiod),
+				    "mii_bus %s couldn't get reset GPIO\n", bus->id);
 		device_del(&bus->dev);
-		return PTR_ERR(gpiod);
+		return err;
 	} else	if (gpiod) {
 		bus->reset_gpiod = gpiod;
 
-- 
2.17.1