[PATCH v2 3/4] mmc: sdhci-xenon: use clk only with DT
From: Marcin Wojtas
Date: Thu Nov 19 2020 - 22:27:18 EST
As a preparation for supporting ACPI, modify the driver
to use the clk framework only when booting with DT -
otherwise rely on the configuration done by firmware.
For that purpose introduce also a custom SDHCI get_max_clock
callback.
Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-xenon.c | 80 +++++++++++++-------
1 file changed, 51 insertions(+), 29 deletions(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index bfc76b0e3eaa..dfc3b5f62a6d 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -247,6 +247,16 @@ static void xenon_voltage_switch(struct sdhci_host *host)
sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
+static unsigned int xenon_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ if (pltfm_host->clk)
+ return sdhci_pltfm_clk_get_max_clock(host);
+ else
+ return pltfm_host->clock;
+}
+
static const struct sdhci_ops sdhci_xenon_ops = {
.voltage_switch = xenon_voltage_switch,
.set_clock = sdhci_set_clock,
@@ -254,7 +264,7 @@ static const struct sdhci_ops sdhci_xenon_ops = {
.set_bus_width = sdhci_set_bus_width,
.reset = xenon_reset,
.set_uhs_signaling = xenon_set_uhs_signaling,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .get_max_clock = xenon_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
@@ -483,6 +493,7 @@ static void xenon_sdhc_unprepare(struct sdhci_host *host)
static int xenon_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
+ struct device *dev = &pdev->dev;
struct sdhci_host *host;
struct xenon_priv *priv;
int err;
@@ -503,25 +514,27 @@ static int xenon_probe(struct platform_device *pdev)
*/
xenon_replace_mmc_host_ops(host);
- pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(pltfm_host->clk)) {
- err = PTR_ERR(pltfm_host->clk);
- dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
- goto free_pltfm;
- }
- err = clk_prepare_enable(pltfm_host->clk);
- if (err)
- goto free_pltfm;
-
- priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
- if (IS_ERR(priv->axi_clk)) {
- err = PTR_ERR(priv->axi_clk);
- if (err == -EPROBE_DEFER)
- goto err_clk;
- } else {
- err = clk_prepare_enable(priv->axi_clk);
+ if (dev->of_node) {
+ pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(pltfm_host->clk)) {
+ err = PTR_ERR(pltfm_host->clk);
+ dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
+ goto free_pltfm;
+ }
+ err = clk_prepare_enable(pltfm_host->clk);
if (err)
- goto err_clk;
+ goto free_pltfm;
+
+ priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
+ if (IS_ERR(priv->axi_clk)) {
+ err = PTR_ERR(priv->axi_clk);
+ if (err == -EPROBE_DEFER)
+ goto err_clk;
+ } else {
+ err = clk_prepare_enable(priv->axi_clk);
+ if (err)
+ goto err_clk;
+ }
}
err = mmc_of_parse(host->mmc);
@@ -561,9 +574,11 @@ static int xenon_probe(struct platform_device *pdev)
pm_runtime_put_noidle(&pdev->dev);
xenon_sdhc_unprepare(host);
err_clk_axi:
- clk_disable_unprepare(priv->axi_clk);
+ if (dev->of_node)
+ clk_disable_unprepare(priv->axi_clk);
err_clk:
- clk_disable_unprepare(pltfm_host->clk);
+ if (dev->of_node)
+ clk_disable_unprepare(pltfm_host->clk);
free_pltfm:
sdhci_pltfm_free(pdev);
return err;
@@ -574,6 +589,7 @@ static int xenon_remove(struct platform_device *pdev)
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct device *dev = &pdev->dev;
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -582,8 +598,10 @@ static int xenon_remove(struct platform_device *pdev)
sdhci_remove_host(host, 0);
xenon_sdhc_unprepare(host);
- clk_disable_unprepare(priv->axi_clk);
- clk_disable_unprepare(pltfm_host->clk);
+ if (dev->of_node) {
+ clk_disable_unprepare(priv->axi_clk);
+ clk_disable_unprepare(pltfm_host->clk);
+ }
sdhci_pltfm_free(pdev);
@@ -620,7 +638,8 @@ static int xenon_runtime_suspend(struct device *dev)
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
- clk_disable_unprepare(pltfm_host->clk);
+ if (dev->of_node)
+ clk_disable_unprepare(pltfm_host->clk);
/*
* Need to update the priv->clock here, or when runtime resume
* back, phy don't aware the clock change and won't adjust phy
@@ -637,10 +656,12 @@ static int xenon_runtime_resume(struct device *dev)
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
int ret;
- ret = clk_prepare_enable(pltfm_host->clk);
- if (ret) {
- dev_err(dev, "can't enable mainck\n");
- return ret;
+ if (dev->of_node) {
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret) {
+ dev_err(dev, "can't enable mainck\n");
+ return ret;
+ }
}
if (priv->restore_needed) {
@@ -655,7 +676,8 @@ static int xenon_runtime_resume(struct device *dev)
goto out;
return 0;
out:
- clk_disable_unprepare(pltfm_host->clk);
+ if (dev->of_node)
+ clk_disable_unprepare(pltfm_host->clk);
return ret;
}
#endif /* CONFIG_PM */
--
2.29.0