[PATCH 2/2] drm/meson: dw-hdmi: Enable the iahb clock early enough

From: Marc Zyngier
Date: Fri Nov 20 2020 - 04:42:19 EST


Instead of moving meson_dw_hdmi_init() around which breaks existing
platform, let's enable the clock meson_dw_hdmi_init() depends on.
This means we don't have to worry about this clock being enabled or
not, depending on the boot-loader features.

Fixes: b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")
Reported-by: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
Tested-by: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 29623b309cb1..aad75a22dc33 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1051,6 +1051,10 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
if (ret)
return ret;

+ ret = meson_enable_clk(dev, "iahb");
+ if (ret)
+ return ret;
+
ret = meson_enable_clk(dev, "venci");
if (ret)
return ret;
@@ -1086,6 +1090,8 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,

encoder->possible_crtcs = BIT(0);

+ meson_dw_hdmi_init(meson_dw_hdmi);
+
DRM_DEBUG_DRIVER("encoder initialized\n");

/* Bridge / Connector */
@@ -1110,8 +1116,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
if (IS_ERR(meson_dw_hdmi->hdmi))
return PTR_ERR(meson_dw_hdmi->hdmi);

- meson_dw_hdmi_init(meson_dw_hdmi);
-
next_bridge = of_drm_find_bridge(pdev->dev.of_node);
if (next_bridge)
drm_bridge_attach(encoder, next_bridge,
--
2.28.0