Re: [PATCH v5 2/2] spi: Add generic SPI multiplexer

[Nicolas Saenz Julienne]

On Tue, 2020-11-17 at 00:08 +0000, Chris Packham wrote:
> On 14/11/20 4:46 am, Nicolas Saenz Julienne wrote:
> > Upon registering spi-mux's devices through spi_add_device() the kernel gets
> > stuck waiting for the 'spi_add_lock' mutex to be released. The mutex happens to
> > be held by spi-mux's parent SPI bus, which unluckily, is waiting for spi-mux's
> > probe to finish before releasing it.
> 
> I just re-tested my system with v5.10.0-rc4 and didn't see any problem. 
> My dts is pretty similar to yours the only obvious thing missing is 
> `mux-control-names = "spi";` and I also set `#size-cells = <1>;` (let me 
> know if you want me to post the whole thing).
> 
> It might be dependent on the host spi controller. The re-test I just did 
> was on a board using the spi-orion.c driver and I tested my original 
> change on a board using spi-bcm-qspi.c (I haven't got the board handy 
> right now but I could go and find one if necessary).

Found the issue, something silly on my side. Sorry for the noise.

Regards,
Nicolas

Attachment: signature.asc
Description: This is a digitally signed message part