Re: [PATCH v8] hwmon:Driver for Delta power supplies Q54SJ108A2

From: Guenter Roeck
Date: Sun Nov 22 2020 - 10:51:44 EST

Next message: Pandruvada, Srinivas: "Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver"
Previous message: Pavel Begunkov: "[PATCH v2 4/4] sbitmap: simplify wrap check"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, Nov 08, 2020 at 08:56:36PM -1000, xiao.ma wrote:
> From: "xiao.ma" <xiao.mx.ma@xxxxxxxxxxx>
>
> The driver supports Q54SJ108A2 series modules of Delta.
> Standard attributes are in the sysfs, and other attributes are in the debugfs.
>
> Signed-off-by: xiao.ma <xiao.mx.ma@xxxxxxxxxxx>

Please fix all checkpatch errors and warnings before resubmitting.
Additional comments below.

Guenter

> ---
>
> Notes:
> Patch v2 changelog:
> Add delta.rst in Documentation/hwmon.
> Tristate "DELTA" in Kconfig is changed to "DELTA_POWER_SUPPLIED".
> Modify code: drop the excessive empty lines, correct the comment content, adjust indent, remove extra brackets.
> Patch v3 changelog:
> Add delta.rst to Documentation/hwmon/index.rst.
> Tristate "DELTA_POWER_SUPPLES" in Kconfig is changed to "Delta Power Supplies".
> Patch v4 changelog:
> Correct the spelling "Temperature" in the delta.rst.
> Add Write_protect when write command VOUT_OV_RESPONSE and IOUT_OC_FAULT_RESPONSE.
> Patch v5 changelog:
> Add some non-standard attributes in sysfs system.
> Patch v6 changelog:
> delta.c and delta.rst are renamed to q54sj108a2.c and q54sj108a2.rst.
> Add q54sj108a2 to index.rst.
> Tristate in Kconfig is changed to "Delta Power Supplies Q54SJ108A2".
> The non-standard attributes are added to debugfs.
> Patch v7 changelog:
> Use standard fuctions bin2hex and hex2bin.
> The return of debugfs write is changed to count.
> Drop the error checking of debugfs functions.
> Use probe_new fuction.
> Remove the .remove fuction.
> Patch v8 changelog:
> Use kstrtou8_from_user instead of hex2bin.
> Remove included head files which are not used.
> Done label in debugfs_read fuction is deleted.
> Change email to send the patch.
>
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/q54sj108a2.rst | 52 ++++
> drivers/hwmon/pmbus/Kconfig | 9 +
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/q54sj108a2.c | 422 +++++++++++++++++++++++++++++
> 5 files changed, 485 insertions(+)
> create mode 100644 Documentation/hwmon/q54sj108a2.rst
> create mode 100755 drivers/hwmon/pmbus/q54sj108a2.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index b797db738225..4bb680b3c7ea 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -148,6 +148,7 @@ Hardware Monitoring Kernel Drivers
> powr1220
> pxe1610
> pwm-fan
> + q54sj108a2
> raspberrypi-hwmon
> sch5627
> sch5636
> diff --git a/Documentation/hwmon/q54sj108a2.rst b/Documentation/hwmon/q54sj108a2.rst
> new file mode 100644
> index 000000000000..a575bdfa7c18
> --- /dev/null
> +++ b/Documentation/hwmon/q54sj108a2.rst
> @@ -0,0 +1,52 @@
> +Kernel driver q54sj108a2
> +=====================
> +
> +Supported chips:
> +
> + * DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH, Q54SJ108A2NCPG, Q54SJ108A2NCPH
> +
> + Prefix: 'Q54SJ108A2'
> +
> + Addresses scanned: -
> +
> + Datasheet: https://filecenter.delta-china.com.cn/products/download/01/0102/datasheet/DS_Q54SJ108A2.pdf
> +
> +Authors:
> + Xiao.ma <xiao.mx.ma@xxxxxxxxxxx>
> +
> +
> +Description
> +-----------
> +
> +This driver implements support for DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH,
> +Q54SJ108A2NCPG, and Q54SJ108A2NCPH 1/4 Brick DC/DC Regulated Power Module
> +with PMBus support.
> +
> +The driver is a client driver to the core PMBus driver.
> +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
> +
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
> +details.
> +
> +
> +Sysfs entries
> +-------------
> +
> +===================== ===== ==================================================
> +curr1_alarm RO Output current alarm
> +curr1_input RO Output current
> +curr1_label RO 'iout1'
> +in1_alarm RO Input voltage alarm
> +in1_input RO Input voltage
> +in1_label RO 'vin'
> +in2_alarm RO Output voltage alarm
> +in2_input RO Output voltage
> +in2_label RO 'vout1'
> +temp1_alarm RO Temperature alarm
> +temp1_input RO Chip temperature
> +===================== ===== ==================================================
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index a25faf69fce3..01de280820ee 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -229,6 +229,15 @@ config SENSORS_PXE1610
> This driver can also be built as a module. If so, the module will
> be called pxe1610.
>
> +config SENSORS_Q54SJ108A2
> + tristate "Delta Power Supplies Q54SJ108A2"
> + help
> + If you say yes here you get hardware monitoring support for Delta
> + Q54SJ108A2 series Power Supplies.
> +
> + This driver can also be built as a module. If so, the module will
> + be called q54sj108a2.
> +
> config SENSORS_TPS40422
> tristate "TI TPS40422"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 4c97ad0bd791..a50122cd455b 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
> obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
> +obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o
> obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c
> new file mode 100755
> index 000000000000..f25a5c8c2a2b
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/q54sj108a2.c
> @@ -0,0 +1,422 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Driver for Delta modules, Q54SJ108A2 series 1/4 Brick DC/DC
> + * Regulated Power Module
> + *
> + * Copyright 2020 Delta LLC.
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include "pmbus.h"
> +
> +#define STORE_DEFAULT_ALL 0x11
> +#define ERASE_BLACKBOX_DATA 0xD1
> +#define READ_HISTORY_EVENT_NUMBER 0xD2
> +#define READ_HISTORY_EVENTS 0xE0
> +#define SET_HISTORY_EVENT_OFFSET 0xE1
> +#define PMBUS_CMD_FLASH_KEY_WRITE 0xEC
> +
> +enum chips {
> + Q54SJ108A2
> +};
> +
> +enum {
> + Q54SJ108A2_DEBUGFS_OPERATION = 0,
> + Q54SJ108A2_DEBUGFS_CLEARFAULT,
> + Q54SJ108A2_DEBUGFS_WRITEPROTECT,
> + Q54SJ108A2_DEBUGFS_STOREDEFAULT,
> + Q54SJ108A2_DEBUGFS_VOOV_RESPONSE,
> + Q54SJ108A2_DEBUGFS_IOOC_RESPONSE,
> + Q54SJ108A2_DEBUGFS_PMBUS_VERSION,
> + Q54SJ108A2_DEBUGFS_MFR_ID,
> + Q54SJ108A2_DEBUGFS_MFR_MODEL,
> + Q54SJ108A2_DEBUGFS_MFR_REVISION,
> + Q54SJ108A2_DEBUGFS_MFR_LOCATION,
> + Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE,
> + Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET,
> + Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET,
> + Q54SJ108A2_DEBUGFS_BLACKBOX_READ,
> + Q54SJ108A2_DEBUGFS_FLASH_KEY,
> + Q54SJ108A2_DEBUGFS_NUM_ENTRIES
> +};
> +
> +struct q54sj108a2_data {
> + enum chips chip;
> + struct i2c_client *client;
> +
> + int debugfs_entries[Q54SJ108A2_DEBUGFS_NUM_ENTRIES];
> +};
> +
> +#define to_psu(x, y) container_of((x), struct q54sj108a2_data, debugfs_entries[(y)])
> +
> +static struct pmbus_driver_info q54sj108a2_info[] = {
> + [Q54SJ108A2] = {
> + .pages = 1,
> +
> + /* Source : Delta Q54SJ108A2 */
> + .format[PSC_TEMPERATURE] = linear,
> + .format[PSC_VOLTAGE_IN] = linear,
> + .format[PSC_CURRENT_OUT] = linear,
> +
> + .func[0] = PMBUS_HAVE_VIN |
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
> + PMBUS_HAVE_STATUS_INPUT,
> + },
> +};
> +
> +static ssize_t q54sj108a2_debugfs_read(struct file *file, char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + int rc;
> + int *idxp = file->private_data;
> + int idx = *idxp;
> + struct q54sj108a2_data *psu = to_psu(idxp, idx);
> + char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
> + char data_char[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
> + char *res;
> +
> + switch (idx) {
> + case Q54SJ108A2_DEBUGFS_OPERATION:
> + rc = i2c_smbus_read_byte_data(psu->client, PMBUS_OPERATION);
> + if (rc < 0)
> + return rc;
> +
> + rc = snprintf(data, 3, "%02x", rc);
> + break;
> + case Q54SJ108A2_DEBUGFS_WRITEPROTECT:
> + rc = i2c_smbus_read_byte_data(psu->client, PMBUS_WRITE_PROTECT);
> + if (rc < 0)
> + return rc;
> +
> + rc = snprintf(data, 3, "%02x", rc);
> + break;
> + case Q54SJ108A2_DEBUGFS_VOOV_RESPONSE:
> + rc = i2c_smbus_read_byte_data(psu->client, PMBUS_VOUT_OV_FAULT_RESPONSE);
> + if (rc < 0)
> + return rc;
> +
> + rc = snprintf(data, 3, "%02x", rc);
> + break;
> + case Q54SJ108A2_DEBUGFS_IOOC_RESPONSE:
> + rc = i2c_smbus_read_byte_data(psu->client, PMBUS_IOUT_OC_FAULT_RESPONSE);
> + if (rc < 0)
> + return rc;
> +
> + rc = snprintf(data, 3, "%02x", rc);
> + break;
> + case Q54SJ108A2_DEBUGFS_PMBUS_VERSION:
> + rc = i2c_smbus_read_byte_data(psu->client, PMBUS_REVISION);
> + if (rc < 0)
> + return rc;
> +
> + rc = snprintf(data, 3, "%02x", rc);
> + break;
> + case Q54SJ108A2_DEBUGFS_MFR_ID:
> + rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_ID, data);
> + if (rc < 0)
> + return rc;
> + break;
> + case Q54SJ108A2_DEBUGFS_MFR_MODEL:
> + rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_MODEL, data);
> + if (rc < 0)
> + return rc;
> + break;
> + case Q54SJ108A2_DEBUGFS_MFR_REVISION:
> + rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_REVISION, data);
> + if (rc < 0)
> + return rc;
> + break;
> + case Q54SJ108A2_DEBUGFS_MFR_LOCATION:
> + rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_LOCATION, data);
> + if (rc < 0)
> + return rc;
> + break;
> + case Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET:
> + rc = i2c_smbus_read_byte_data(psu->client, READ_HISTORY_EVENT_NUMBER);
> + if (rc < 0)
> + return rc;
> +
> + rc = snprintf(data, 3, "%02x", rc);
> + break;
> + case Q54SJ108A2_DEBUGFS_BLACKBOX_READ:
> + rc = i2c_smbus_read_block_data(psu->client, READ_HISTORY_EVENTS, data);
> + if (rc < 0)
> + return rc;
> +
> + res = bin2hex(data, data_char, 32);
> + rc = res - data;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_FLASH_KEY:
> + rc = i2c_smbus_read_block_data(psu->client, PMBUS_CMD_FLASH_KEY_WRITE, data);
> + if (rc < 0)
> + return rc;
> +
> + res = bin2hex(data, data_char, 4);
> + rc = res - data;
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + data[rc] = '\n';
> + rc += 2;
> +
> + return simple_read_from_buffer(buf, count, ppos, data, rc);
> +}
> +
> +static ssize_t q54sj108a2_debugfs_write(struct file *file, const char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + u8 flash_key[4];
> + u8 dst_data;
> + ssize_t rc;
> + int *idxp = file->private_data;
> + int idx = *idxp;
> + struct q54sj108a2_data *psu = to_psu(idxp, idx);
> +
> + rc = i2c_smbus_write_byte_data(psu->client, PMBUS_WRITE_PROTECT, 0);
> + if (rc)
> + return rc;
> +
> + switch (idx) {
> + case Q54SJ108A2_DEBUGFS_OPERATION:
> + rc = kstrtou8_from_user(buf, count, 0, &dst_data);
> + if (rc < 0)
> + return rc;
> +
> + rc = i2c_smbus_write_byte_data(psu->client, PMBUS_OPERATION, dst_data);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_CLEARFAULT:
> + rc = i2c_smbus_write_byte(psu->client, PMBUS_CLEAR_FAULTS);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_STOREDEFAULT:
> + flash_key[0] = 0x7E;
> + flash_key[1] = 0x15;
> + flash_key[2] = 0xDC;
> + flash_key[3] = 0x42;
> + rc = i2c_smbus_write_block_data(psu->client, PMBUS_CMD_FLASH_KEY_WRITE, 4, flash_key);
> + if (rc < 0)
> + return rc;
> +
> + rc = i2c_smbus_write_byte(psu->client, STORE_DEFAULT_ALL);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_VOOV_RESPONSE:
> + rc = kstrtou8_from_user(buf, count, 0, &dst_data);
> + if (rc < 0)
> + return rc;
> +
> + rc = i2c_smbus_write_byte_data(psu->client, PMBUS_VOUT_OV_FAULT_RESPONSE, dst_data);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_IOOC_RESPONSE:
> + rc = kstrtou8_from_user(buf, count, 0, &dst_data);
> + if (rc < 0)
> + return rc;
> +
> + rc = i2c_smbus_write_byte_data(psu->client, PMBUS_IOUT_OC_FAULT_RESPONSE, dst_data);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE:
> + rc = i2c_smbus_write_byte(psu->client, ERASE_BLACKBOX_DATA);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + case Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET:
> + rc = kstrtou8_from_user(buf, count, 0, &dst_data);
> + if (rc < 0)
> + return rc;
> +
> + rc = i2c_smbus_write_byte_data(psu->client, SET_HISTORY_EVENT_OFFSET, dst_data);
> + if (rc < 0)
> + return rc;
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return count;
> +}
> +
> +static const struct file_operations q54sj108a2_fops = {
> + .llseek = noop_llseek,
> + .read = q54sj108a2_debugfs_read,
> + .write = q54sj108a2_debugfs_write,
> + .open = simple_open,
> +};
> +
> +static const struct i2c_device_id q54sj108a2_id[] = {
> + { "Q54SJ108A2", Q54SJ108A2 },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, q54sj108a2_id);
> +
> +static int q54sj108a2_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
> + enum chips chip_id;
> + int ret, i;
> + struct dentry *debugfs;
> + struct dentry *q54sj108a2_dir;
> + struct q54sj108a2_data *psu;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_WORD_DATA |
> + I2C_FUNC_SMBUS_BLOCK_DATA))
> + return -ENODEV;
> +
> + if (client->dev.of_node)
> + chip_id = (enum chips)of_device_get_match_data(dev);

As reported by 0-day, this doesn't work. It needs a cast to unsigned long,
or a double cast, such as
chip_id = (enum chips)(unsigned long)of_device_get_match_data(dev);

> + else
> + chip_id = i2c_match_id(q54sj108a2_id, client)->driver_data;
> +
> + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> + if (ret < 0) {
> + dev_err(&client->dev, "Failed to read Manufacturer ID\n");
> + return ret;
> + }
> + if (ret != 5 || strncmp(buf, "DELTA", 5)) {
> + buf[ret] = '\0';
> + dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
> + return -ENODEV;
> + }
> +
> + /*
> + * The chips support reading PMBUS_MFR_MODEL.
> + */
> + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read Manufacturer Model\n");
> + return ret;
> + }
> + if (ret != 14 || strncmp(buf, "Q54SJ108A2", 10)) {
> + buf[ret] = '\0';
> + dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
> + return -ENODEV;
> + }
> +
> + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_REVISION, buf);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read Manufacturer Revision\n");
> + return ret;
> + }
> + if (ret != 4 || buf[0] != 'S') {
> + buf[ret] = '\0';
> + dev_err(dev, "Unsupported Manufacturer Revision '%s'\n", buf);
> + return -ENODEV;
> + }
> +
> + ret = pmbus_do_probe(client, &q54sj108a2_id[chip_id], &q54sj108a2_info[chip_id]);

The parameters for this function have changed. Please rebase your patch.

> + if (ret)
> + return ret;
> +
> + psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
> + if (!psu)
> + return 0;
> +
> + psu->client = client;
> +
> + debugfs = pmbus_get_debugfs_dir(client);
> +
> + q54sj108a2_dir = debugfs_create_dir(client->name, debugfs);
> +
> + for (i = 0; i < Q54SJ108A2_DEBUGFS_NUM_ENTRIES; ++i)
> + psu->debugfs_entries[i] = i;
> +
> + debugfs_create_file("operation", 0644, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_OPERATION],
> + &q54sj108a2_fops);
> + debugfs_create_file("clear_fault", 0200, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_CLEARFAULT],
> + &q54sj108a2_fops);
> + debugfs_create_file("write_protect", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_WRITEPROTECT],
> + &q54sj108a2_fops);
> + debugfs_create_file("store_default", 0200, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_STOREDEFAULT],
> + &q54sj108a2_fops);
> + debugfs_create_file("vo_ov_response", 0644, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_VOOV_RESPONSE],
> + &q54sj108a2_fops);
> + debugfs_create_file("io_oc_response", 0644, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_IOOC_RESPONSE],
> + &q54sj108a2_fops);
> + debugfs_create_file("pmbus_revision", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_PMBUS_VERSION],
> + &q54sj108a2_fops);
> + debugfs_create_file("mfr_id", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_ID],
> + &q54sj108a2_fops);
> + debugfs_create_file("mfr_model", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_MODEL],
> + &q54sj108a2_fops);
> + debugfs_create_file("mfr_revision", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_REVISION],
> + &q54sj108a2_fops);
> + debugfs_create_file("mfr_location", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_LOCATION],
> + &q54sj108a2_fops);
> + debugfs_create_file("blackbox_erase", 0200, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE],
> + &q54sj108a2_fops);
> + debugfs_create_file("blackbox_read_offset", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET],
> + &q54sj108a2_fops);
> + debugfs_create_file("blackbox_set_offset", 0200, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET],
> + &q54sj108a2_fops);
> + debugfs_create_file("blackbox_read", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_READ],
> + &q54sj108a2_fops);
> + debugfs_create_file("flash_key", 0444, q54sj108a2_dir,
> + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_FLASH_KEY],
> + &q54sj108a2_fops);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id q54sj108a2_of_match[] = {
> + { .compatible = "delta,Q54SJ108A2", .data = (void *)Q54SJ108A2 },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, q54sj108a2_of_match);
> +
> +static struct i2c_driver q54sj108a2_driver = {
> + .driver = {
> + .name = "Q54SJ108A2",
> + .of_match_table = q54sj108a2_of_match,
> + },
> + .probe_new = q54sj108a2_probe,
> + .id_table = q54sj108a2_id,
> +};
> +
> +module_i2c_driver(q54sj108a2_driver);
> +
> +MODULE_AUTHOR("Xiao.Ma <xiao.mx.ma@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("PMBus driver for Delta Q54SJ108A2 series modules");
> +MODULE_LICENSE("GPL");

Next message: Pandruvada, Srinivas: "Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver"
Previous message: Pavel Begunkov: "[PATCH v2 4/4] sbitmap: simplify wrap check"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]