[PATCH net-next v2 2/3] mlxsw: spectrum_ptp: use PTP wide message type definitions
From: Christian Eggers
Date: Tue Nov 24 2020 - 02:47:10 EST
Use recently introduced PTP wide defines instead of a driver internal
enumeration.
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
Reviewed-by: Ido Schimmel <idosch@xxxxxxxxxx>
Cc: Petr Machata <petrm@xxxxxxxxxxxx>
Cc: Jiri Pirko <jiri@xxxxxxxxxx>
Cc: Ido Schimmel <idosch@xxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c | 8 ++++----
drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.h | 7 -------
2 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
index ca8090a28dec..d6e9ecb14681 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
@@ -828,10 +828,10 @@ struct mlxsw_sp_ptp_state *mlxsw_sp1_ptp_init(struct mlxsw_sp *mlxsw_sp)
goto err_hashtable_init;
/* Delive these message types as PTP0. */
- message_type = BIT(MLXSW_SP_PTP_MESSAGE_TYPE_SYNC) |
- BIT(MLXSW_SP_PTP_MESSAGE_TYPE_DELAY_REQ) |
- BIT(MLXSW_SP_PTP_MESSAGE_TYPE_PDELAY_REQ) |
- BIT(MLXSW_SP_PTP_MESSAGE_TYPE_PDELAY_RESP);
+ message_type = BIT(PTP_MSGTYPE_SYNC) |
+ BIT(PTP_MSGTYPE_DELAY_REQ) |
+ BIT(PTP_MSGTYPE_PDELAY_REQ) |
+ BIT(PTP_MSGTYPE_PDELAY_RESP);
err = mlxsw_sp_ptp_mtptpt_set(mlxsw_sp, MLXSW_REG_MTPTPT_TRAP_ID_PTP0,
message_type);
if (err)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.h
index 8c386571afce..1d43a3755285 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.h
@@ -11,13 +11,6 @@ struct mlxsw_sp;
struct mlxsw_sp_port;
struct mlxsw_sp_ptp_clock;
-enum {
- MLXSW_SP_PTP_MESSAGE_TYPE_SYNC,
- MLXSW_SP_PTP_MESSAGE_TYPE_DELAY_REQ,
- MLXSW_SP_PTP_MESSAGE_TYPE_PDELAY_REQ,
- MLXSW_SP_PTP_MESSAGE_TYPE_PDELAY_RESP,
-};
-
static inline int mlxsw_sp_ptp_get_ts_info_noptp(struct ethtool_ts_info *info)
{
info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler