[RESEND PATCH v4 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
From: Shihlun Lin
Date: Wed Nov 25 2020 - 02:51:44 EST
AHC1EC0 is the embedded controller driver for Advantech industrial
products. This provides sub-devices such as hwmon and watchdog, and also
expose functions for sub-devices to read/write the value to embedded
controller.
Signed-off-by: Shihlun Lin <shihlun.lin@xxxxxxxxxxxxxxxx>
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 2 +
drivers/mfd/ahc1ec0.c | 1405 +++++++++++++++++++++++++++++++++++
include/linux/mfd/ahc1ec0.h | 338 +++++++++
4 files changed, 1755 insertions(+)
create mode 100644 drivers/mfd/ahc1ec0.c
create mode 100644 include/linux/mfd/ahc1ec0.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b99a13669bf..1cc40217f798 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2166,5 +2166,15 @@ config MFD_INTEL_M10_BMC
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_AHC1EC0
+ tristate "Advantech Embedded Controller Module"
+ depends on X86
+ select MFD_CORE
+ help
+ This is the core function that for Advantech EC drivers. It
+ includes the sub-devices such as hwmon, watchdog, etc. And also
+ provides expose functions for sub-devices to read/write the value
+ to embedded controller.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1780019d2474..80a9a2bdc3ba 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -267,3 +267,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
+
+obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
new file mode 100644
index 000000000000..768d2063bed1
--- /dev/null
+++ b/drivers/mfd/ahc1ec0.c
@@ -0,0 +1,1405 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Base driver for Advantech controlling EC chip AHC1EC0
+ *
+ * Copyright (C) 2020, Advantech Automation Corp.
+ *
+ * Change Log:
+ * Version 1.00 <10/10/2014> Sun.Lang
+ * - Initial version
+ * Version 1.01 <11/05/2015> Jiangwei.Zhu
+ * - Modify read_ad_value() function.
+ * - Add smbus_read_byte() function.
+ * - Add smbus_write_byte() function.
+ * - Add wait_smbus_protocol_finish() function.
+ * Version 1.02 <03/04/2016> Jiangwei.Zhu
+ * - Add smbus_read_word() function.
+ * Version 1.03 <01/22/2017> Ji.Xu
+ * - Add detect to Advantech porduct name "ECU".
+ * Version 1.04 <09/20/2017> Ji.Xu
+ * - Update to support detect Advantech product name in UEFI
+ * BIOS(DMI).
+ * Version 1.05 <11/02/2017> Ji.Xu
+ * - Fixed issue: Cache coherency error when exec 'ioremap_uncache()'
+ * in kernel-4.10.
+ * Version 2.00 <11/04/2020> Shihlun.Lin
+ * - Update: Replace ioremap_nocache() with ioremap_uc() since
+ * ioremap_uc() was used on the entire PCI BAR.
+ */
+
+#include <linux/kconfig.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/mfd/ahc1ec0.h>
+#include <linux/acpi.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mfd/core.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define ADVANTECH_EC_NAME "ahc1ec0"
+#define ADVANTECH_EC_MFD_VER "2.0.0"
+#define ADVANTECH_EC_MFD_DATE "11/04/2020"
+
+struct mutex lock;
+
+enum {
+ ADVEC_SUBDEV_BRIGHTNESS = 0,
+ ADVEC_SUBDEV_EEPROM,
+ ADVEC_SUBDEV_GPIO,
+ ADVEC_SUBDEV_HWMON,
+ ADVEC_SUBDEV_LED,
+ ADVEC_SUBDEV_WDT,
+ ADVEC_SUBDEV_MAX,
+};
+
+static int wait_ibf(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & 0x02) == 0)
+ return 0;
+
+ udelay(EC_UDELAY_TIME);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Wait OBF (Output buffer full) set */
+static int wait_obf(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & 0x01) != 0)
+ return 0;
+
+ udelay(EC_UDELAY_TIME);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Read data from EC HW ram */
+static int read_hw_ram(uchar addr, uchar *data)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "read EC HW ram" command to EC Command port */
+ outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "EC HW ram" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ /* Step 4. Wait OBF set */
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ /* Step 5. Get "EC HW ram" data from EC Data port */
+ *data = inb(EC_STATUS_PORT);
+
+ mutex_unlock(&lock);
+
+ return ret;
+
+error:
+ mutex_unlock(&lock);
+ pr_err("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+/* Write data to EC HW ram */
+int write_hw_ram(uchar addr, uchar data)
+{
+ int ret;
+
+ mutex_lock(&lock);
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "write EC HW ram" command to EC command port */
+ outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "EC HW ram" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ /* Step 4. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 5. Send "EC HW ram" data to EC Data port */
+ outb(data, EC_STATUS_PORT);
+
+ mutex_unlock(&lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_err("%s: Wait for IBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(write_hw_ram);
+
+static int wait_smbus_protocol_finish(void)
+{
+ uchar addr, data;
+ int retry = 1000;
+
+ do {
+ addr = EC_SMBUS_PROTOCOL;
+ data = 0xFF;
+ if (!read_hw_ram(addr, &data))
+ return 0;
+
+ if (data == 0)
+ return 0;
+
+ udelay(EC_UDELAY_TIME);
+ } while (retry-- > 0);
+
+ return -ETIMEDOUT;
+}
+
+/* Get dynamic control table */
+static int adv_get_dynamic_tab(struct adv_ec_platform_data *pdata)
+{
+ int i, ret;
+ uchar pin_tmp, device_id;
+
+ mutex_lock(&lock);
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ pdata->dym_tbl[i].DeviceID = 0xff;
+ pdata->dym_tbl[i].HWPinNumber = 0xff;
+ }
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /*
+ * Step 1. Write 0x20 to 0x29A
+ * Send write item number into index command
+ */
+ outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /*
+ * Step 3. Write item number to 0x299
+ * Write item number to index. Item number is limited in range 0 to 31
+ */
+ outb(i, EC_STATUS_PORT);
+
+ /* Step 4. Wait OBF set */
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ /*
+ * Step 5. Read 0x299 port
+ * If item is defined, EC will return item number.
+ * If table item is not defined, EC will return 0xFF.
+ */
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&lock);
+ return -EINVAL;
+ }
+
+ /* Step 6. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /*
+ * Step 7. Write 0x21 to 0x29A
+ * Send read HW pin number command
+ */
+ outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
+
+ /* Step 8. Wait OBF set */
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ /*
+ * Step 9. Read 0x299 port
+ * EC will return current item HW pin number
+ */
+ pin_tmp = inb(EC_STATUS_PORT) & 0xff;
+
+ /* Step 10. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ if (pin_tmp == 0xff) {
+ mutex_unlock(&lock);
+ return -EINVAL;
+ }
+
+ /*
+ * Step 11. Write 0x22 to 0x29A
+ * Send read device id command
+ */
+ outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
+
+ /* Step 12. Wait OBF set */
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ /*
+ * Step 13. Read 0x299 port
+ * EC will return current item Device ID
+ */
+ device_id = inb(EC_STATUS_PORT) & 0xff;
+
+ /* Step 14. Save data to a database */
+ pdata->dym_tbl[i].DeviceID = device_id;
+ pdata->dym_tbl[i].HWPinNumber = pin_tmp;
+ }
+
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_err("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+int read_ad_value(uchar hwpin, uchar multi)
+{
+ int ret;
+ u32 ret_val;
+ uchar LSB, MSB;
+
+ mutex_lock(&lock);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(hwpin, EC_STATUS_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&lock);
+ return -1;
+ }
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ LSB = inb(EC_STATUS_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ MSB = inb(EC_STATUS_PORT);
+ ret_val = ((MSB << 8) | LSB) & 0x03FF;
+ ret_val = ret_val * multi * 100;
+
+ mutex_unlock(&lock);
+ return ret_val;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(read_ad_value);
+
+int read_acpi_value(uchar addr, uchar *pvalue)
+{
+ int ret;
+ uchar value;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(addr, EC_STATUS_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ value = inb(EC_STATUS_PORT);
+ *pvalue = value;
+ mutex_unlock(&lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(read_acpi_value);
+
+int write_acpi_value(uchar addr, uchar value)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(addr, EC_STATUS_PORT);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+int read_gpio_status(uchar PinNumber, uchar *pvalue)
+{
+ int ret;
+
+ uchar gpio_status_value;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ pr_err("%s: Read Pin Number error!!", __func__);
+ mutex_unlock(&lock);
+ return -1;
+ }
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
+
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ gpio_status_value = inb(EC_STATUS_PORT);
+ *pvalue = gpio_status_value;
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+int write_gpio_status(uchar PinNumber, uchar value)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(PinNumber, EC_STATUS_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ pr_err("%s: Read Pin Number error!!", __func__);
+ mutex_unlock(&lock);
+ return -1;
+ }
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(value, EC_STATUS_PORT);
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+int read_gpio_dir(uchar PinNumber, uchar *pvalue)
+{
+ int ret;
+ uchar gpio_dir_value;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(PinNumber, EC_STATUS_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ pr_err("%s: Read Pin Number error!!", __func__);
+ mutex_unlock(&lock);
+ return -1;
+ }
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ gpio_dir_value = inb(EC_STATUS_PORT);
+ *pvalue = gpio_dir_value;
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+int write_gpio_dir(uchar PinNumber, uchar value)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(PinNumber, EC_STATUS_PORT);
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ pr_err("%s: Read Pin Number error!!", __func__);
+ mutex_unlock(&lock);
+ return -1;
+ }
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(value, EC_STATUS_PORT);
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+/* Write data to EC HW ram */
+int write_hw_extend_ram(uchar addr, uchar data)
+{
+ int ret;
+
+ mutex_lock(&lock);
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "write EC HW ram" command to EC command port */
+ outb(EC_HW_EXTEND_RAM_WRITE, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "EC HW ram" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ /* Step 4. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 5. Send "EC HW ram" data to EC Data port */
+ outb(data, EC_STATUS_PORT);
+
+ mutex_unlock(&lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_debug("%s: Wait for IBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+int write_hwram_command(uchar data)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ outb(data, EC_COMMAND_PORT);
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_debug("%s: Wait for IBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(write_hwram_command);
+
+int smbus_read_word(struct EC_SMBUS_WORD_DATA *ptr_ec_smbus_word_data)
+{
+ int ret;
+
+ uchar sm_ready, LSB, MSB, addr, data;
+ unsigned short Value = 0;
+
+ /* Step 1. Select SMBus channel */
+ addr = EC_SMBUS_CHANNEL;
+ data = ptr_ec_smbus_word_data->Channel;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select SMBus channel Failed");
+ goto error;
+ }
+
+ /* Step 2. Set SMBUS device address EX: 0x98 */
+ addr = EC_SMBUS_SLV_ADDR;
+ data = (ptr_ec_smbus_word_data->Address);
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select SMBus dev addr:0x%02X Failed", ptr_ec_smbus_word_data->Address);
+ goto error;
+ }
+
+ /* Step 3. Set Chip (EX: INA266) Register Address */
+ addr = EC_SMBUS_CMD;
+ data = ptr_ec_smbus_word_data->Register;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select Chip Register Addr:0x%02X Failed", ptr_ec_smbus_word_data->Register);
+ goto error;
+ }
+
+ /* Step 4. Set EC SMBUS read word Mode */
+ addr = EC_SMBUS_PROTOCOL;
+ data = SMBUS_WORD_READ;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Set EC SMBUS read Byte Mode Failed");
+ goto error;
+ }
+
+ /* Step 5. Check EC Smbus states */
+ ret = wait_smbus_protocol_finish();
+ if (ret) {
+ pr_err("Wait SmBus Protocol Finish Failed!!");
+ goto error;
+ }
+
+ addr = EC_SMBUS_STATUS;
+ ret = read_hw_ram(addr, &data);
+ if (ret) {
+ pr_err("Check EC Smbus states Failed");
+ goto error;
+ }
+ sm_ready = data;
+
+ /* check no error */
+ if (sm_ready != 0x80) {
+ pr_err("SMBUS ERR:0x%02X", sm_ready);
+ goto error;
+ }
+
+ /* Step 6. Get Value */
+ addr = EC_SMBUS_DAT_OFFSET(0);
+ ret = read_hw_ram(addr, &data);
+ if (ret) {
+ pr_err("Get Value Failed");
+ goto error;
+ }
+ MSB = data;
+
+ addr = EC_SMBUS_DAT_OFFSET(1);
+ ret = read_hw_ram(addr, &data);
+ if (ret) {
+ pr_err("Get Value Failed");
+ goto error;
+ }
+ LSB = data;
+
+ Value = (MSB << 8) | LSB;
+ ptr_ec_smbus_word_data->Value = Value;
+
+ return 0;
+
+error:
+ pr_err("%s: Exception!", __func__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(smbus_read_word);
+
+int smbus_read_byte(struct EC_SMBUS_READ_BYTE *ptr_ec_smbus_read_byte)
+{
+ int ret;
+ uchar sm_ready, addr, data;
+
+ /* CHECK_PARAMETER */
+ if (ptr_ec_smbus_read_byte == NULL)
+ return -EINVAL;
+
+ /* Step 1. Select SMBus channel */
+ addr = EC_SMBUS_CHANNEL;
+ data = ptr_ec_smbus_read_byte->Channel;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select SMBus channel Failed");
+ goto error;
+ }
+
+ /* Step 2. Set SMBUS device address EX: 0x98 */
+ addr = EC_SMBUS_SLV_ADDR;
+ data = (ptr_ec_smbus_read_byte->Address);
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select SMBus dev addr:0x%02X Failed", ptr_ec_smbus_read_byte->Address);
+ goto error;
+ }
+
+ /* Step 3. Set Chip (EX: MCP23008) Register Address */
+ addr = EC_SMBUS_CMD;
+ data = ptr_ec_smbus_read_byte->Register;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select Chip Register Addr:0x%02X Failed", ptr_ec_smbus_read_byte->Register);
+ goto error;
+ }
+
+ /* Step 4. Set EC SMBUS read Byte Mode */
+ addr = EC_SMBUS_PROTOCOL;
+ data = SMBUS_BYTE_READ;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Set EC SMBUS read Byte Mode Failed");
+ goto error;
+ }
+
+ /* Step 5. Check EC Smbus states */
+ ret = wait_smbus_protocol_finish();
+ if (ret) {
+ pr_err("Wait SmBus Protocol Finish Failed!!");
+ goto error;
+ }
+
+ addr = EC_SMBUS_STATUS;
+ ret = read_hw_ram(addr, &data);
+ if (ret) {
+ pr_err("Check EC Smbus states Failed");
+ goto error;
+ }
+ sm_ready = data;
+
+ /* check no error */
+ if (sm_ready != 0x80) {
+ pr_err("SMBUS ERR:(0x%02X)", sm_ready);
+ goto error;
+ }
+
+ /* Step 6. Get Value */
+ addr = EC_SMBUS_DATA;
+ ret = read_hw_ram(addr, &data);
+ if (ret) {
+ pr_err("Get Value Failed");
+ goto error;
+ }
+
+ ptr_ec_smbus_read_byte->Data = (data & 0xFF);
+ return 0;
+
+error:
+ pr_err("%s: Exception!", __func__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(smbus_read_byte);
+
+int smbus_write_byte(struct EC_SMBUS_WRITE_BYTE *ptr_ec_smbus_write_byte)
+{
+ int ret;
+ uchar sm_ready, addr, data;
+
+ /* Step 1. Select SMBus channel */
+ addr = EC_SMBUS_CHANNEL;
+ data = ptr_ec_smbus_write_byte->Channel;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select SMBus channel Failed");
+ goto error;
+ }
+
+ /* Step 2. Set SMBUS device address EX: 0x98 */
+ addr = EC_SMBUS_SLV_ADDR;
+ data = (ptr_ec_smbus_write_byte->Address);
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select SMBus dev addr:0x%02X Failed", ptr_ec_smbus_write_byte->Address);
+ goto error;
+ }
+
+ /* Step 3. Set Chip (EX: MCP23008) Register Address */
+ addr = EC_SMBUS_CMD;
+ data = ptr_ec_smbus_write_byte->Register;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Select Chip reg addr:0x%02X Failed", ptr_ec_smbus_write_byte->Register);
+ goto error;
+ }
+
+ /* Step 4. Set Data to SMBUS */
+ addr = EC_SMBUS_DATA;
+ data = ptr_ec_smbus_write_byte->Data;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Set Data 0x%02X to SMBUS Failed", ptr_ec_smbus_write_byte->Data);
+ goto error;
+ }
+
+ /* Step 5. Set EC SMBUS write Byte Mode */
+ addr = EC_SMBUS_PROTOCOL;
+ data = SMBUS_BYTE_WRITE;
+ ret = write_hw_ram(addr, data);
+ if (ret) {
+ pr_err("Set EC SMBUS write Byte Mode Failed");
+ goto error;
+ }
+
+ /* Step 6. Check EC Smbus states */
+ ret = wait_smbus_protocol_finish();
+ if (ret) {
+ pr_err("Wait SmBus Protocol Finish Failed!!");
+ goto error;
+ }
+
+ addr = EC_SMBUS_STATUS;
+ ret = read_hw_ram(addr, &data);
+ if (ret) {
+ pr_err("Check EC Smbus states Failed");
+ goto error;
+ }
+ sm_ready = data;
+
+ /* check no error */
+ if (sm_ready != 0x80) {
+ pr_err("SMBUS ERR:(0x%02X)", sm_ready);
+ goto error;
+ }
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ pr_err("%s: Exception!", __func__);
+ mutex_unlock(&lock);
+ return ret;
+}
+
+/* Get One Key Recovery status */
+int read_onekey_status(uchar addr, uchar *pdata)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ /* Init return value */
+ *pdata = 0;
+
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "One Key Recovery" command to EC Command port */
+ outb(EC_ONE_KEY_FLAG, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "One Key Recovery function" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ /* Step 4. Wait OBF set */
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ /* Step 5. Get "One Key Recovery function" data from EC Data port */
+ *pdata = inb(EC_STATUS_PORT);
+
+ pr_debug("%s: data= %d, line: %d", __func__, *pdata, __LINE__);
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+/* Set One Key Recovery status */
+int write_onekey_status(uchar addr)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "One Key Recovery" command to EC Command port */
+ outb(EC_ONE_KEY_FLAG, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "One Key Recovery function" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ mutex_unlock(&lock);
+
+ pr_debug("%s: addr= %d, line: %d", __func__, addr, __LINE__);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_debug("%s: Wait for IBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+/* EC OEM get status */
+int ec_oem_get_status(uchar addr, uchar *pdata)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ /* Init return value */
+ *pdata = 0;
+
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "ASG OEM" command to EC Command port */
+ outb(EC_ASG_OEM, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "ASG OEM STATUS READ" address to EC Data port */
+ outb(EC_ASG_OEM_READ, EC_STATUS_PORT);
+
+ /* Step 4. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 5. Send "OEM STATUS" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ /* Step 6. Wait OBF set */
+ ret = wait_obf();
+ if (ret)
+ goto error;
+
+ /* Step 7. Get "OEM STATUS" data from EC Data port */
+ *pdata = inb(EC_STATUS_PORT);
+
+ pr_debug("%s: data= %d, line: %d", __func__, *pdata, __LINE__);
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+ return ret;
+}
+
+/* EC OEM set status */
+int ec_oem_set_status(uchar addr, uchar pdata)
+{
+ int ret;
+
+ mutex_lock(&lock);
+
+ /* Step 0. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 1. Send "ASG OEM" command to EC Command port */
+ outb(EC_ASG_OEM, EC_COMMAND_PORT);
+
+ /* Step 2. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 3. Send "ASG OEM STATUS WRITE" address to EC Data port */
+ outb(EC_ASG_OEM_WRITE, EC_STATUS_PORT);
+
+ /* Step 4. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 5. Send "OEM STATUS" address to EC Data port */
+ outb(addr, EC_STATUS_PORT);
+
+ /* Step 6. Wait IBF clear */
+ ret = wait_ibf();
+ if (ret)
+ goto error;
+
+ /* Step 7. Send "OEM STATUS" status to EC Data port */
+ outb(pdata, EC_STATUS_PORT);
+
+ pr_debug("%s: data= %d, line: %d", __func__, pdata, __LINE__);
+ mutex_unlock(&lock);
+ return 0;
+
+error:
+ mutex_unlock(&lock);
+ pr_warn("%s: Wait for IBF or OBF too long. line: %d", __func__, __LINE__);
+
+ return ret;
+}
+
+static int adv_ec_get_productname(char *product)
+{
+ static unsigned char *uc_ptaddr;
+ static unsigned char *uc_epsaddr;
+ int index = 0, eps_table;
+ int i = 0;
+ int length = 0;
+ int type0_str = 0;
+ int type1_str = 0;
+ int is_advantech = 0;
+
+ uc_ptaddr = ioremap(AMI_UEFI_ADVANTECH_BOARD_NAME_ADDRESS,
+ AMI_UEFI_ADVANTECH_BOARD_NAME_LENGTH);
+ if (!uc_ptaddr) {
+ pr_err("Error: ioremap_uc()");
+ return -ENXIO;
+ }
+
+ /* Try to Read the product name from UEFI BIOS(DMI) EPS table */
+ for (index = 0; index < AMI_UEFI_ADVANTECH_BOARD_NAME_LENGTH; index++) {
+ if (uc_ptaddr[index] == '_'
+ && uc_ptaddr[index+0x1] == 'S'
+ && uc_ptaddr[index+0x2] == 'M'
+ && uc_ptaddr[index+0x3] == '_'
+ && uc_ptaddr[index+0x10] == '_'
+ && uc_ptaddr[index+0x11] == 'D'
+ && uc_ptaddr[index+0x12] == 'M'
+ && uc_ptaddr[index+0x13] == 'I'
+ && uc_ptaddr[index+0x14] == '_'
+ ) {
+ eps_table = 1;
+ break;
+ }
+ }
+
+ /* If EPS table exist, read type1(system information) */
+ if (eps_table) {
+ uc_epsaddr =
+ (char *)ioremap(((unsigned int *)&uc_ptaddr[index+0x18])[0],
+ ((unsigned short *)&uc_ptaddr[index+0x16])[0]);
+ if (!uc_epsaddr) {
+ uc_epsaddr =
+ (char *)ioremap_uc(((unsigned int *)&uc_ptaddr[index+0x18])[0],
+ ((unsigned short *)&uc_ptaddr[index+0x16])[0]);
+ if (!uc_epsaddr) {
+ pr_err("Error: both ioremap() and ioremap_uc() exec failed!");
+ return -ENXIO;
+ }
+ }
+
+ type0_str = (int)uc_epsaddr[1];
+ for (i = type0_str; i < (type0_str+512); i++) {
+ if (uc_epsaddr[i] == 0 && uc_epsaddr[i+1] == 0 && uc_epsaddr[i+2] == 1) {
+ type1_str = i + uc_epsaddr[i+3];
+ break;
+ }
+ }
+ for (i = type1_str; i < (type1_str+512); i++) {
+ if (!strncmp(&uc_epsaddr[i], "Advantech", 9))
+ is_advantech = 1;
+
+ if (uc_epsaddr[i] == 0) {
+ i++;
+ type1_str = i;
+ break;
+ }
+ }
+ length = 2;
+ while ((uc_epsaddr[type1_str + length] != 0)
+ && (length < AMI_UEFI_ADVANTECH_BOARD_NAME_LENGTH)) {
+ length += 1;
+ }
+ memmove(product, &uc_epsaddr[type1_str], length);
+ iounmap((void *)uc_epsaddr);
+ if (is_advantech) {
+ iounmap((void *)uc_ptaddr);
+ return 0;
+ }
+ }
+
+ /* It is an old BIOS, read from 0x000F0000 */
+ for (index = 0; index < (AMI_UEFI_ADVANTECH_BOARD_NAME_LENGTH - 3); index++) {
+ if (!strncmp(&uc_ptaddr[index], "TPC", 3)
+ || !strncmp(&uc_ptaddr[index], "UNO", 3)
+ || !strncmp(&uc_ptaddr[index], "ITA", 3)
+ || !strncmp(&uc_ptaddr[index], "MIO", 3)
+ || !strncmp(&uc_ptaddr[index], "ECU", 3)
+ || !strncmp(&uc_ptaddr[index], "APAX", 4))
+ break;
+ }
+
+ if (index == (AMI_UEFI_ADVANTECH_BOARD_NAME_LENGTH - 3)) {
+ pr_err("%s: Can't find the product name, line: %d", __func__, __LINE__);
+ product[0] = '\0';
+ iounmap((void *)uc_ptaddr);
+ return -ENODATA;
+ }
+
+ /* Use char "Space" (ASCII code: 32) to check the end of the Product Name. */
+ for (i = 0; (uc_ptaddr[index+i] != 32) && (i < 31); i++)
+ product[i] = uc_ptaddr[index+i];
+
+ product[i] = '\0';
+ pr_info("%s: BIOS Product Name = %s, line: %d", __func__, product, __LINE__);
+
+ iounmap((void *)uc_ptaddr);
+
+ return 0;
+}
+
+static const struct mfd_cell adv_ec_sub_cells[] = {
+ { .name = "adv-ec-brightness", },
+ { .name = "adv-ec-eeprom", },
+ { .name = "adv-ec-gpio", },
+ { .name = "adv-ec-hwmon", },
+ { .name = "adv-ec-led", },
+ { .name = "adv-ec-wdt", },
+};
+
+static int adv_ec_init_ec_data(struct adv_ec_platform_data *pdata)
+{
+ int ret;
+
+ pdata->sub_dev_mask = 0;
+ pdata->sub_dev_nb = 0;
+ pdata->dym_tbl = NULL;
+ pdata->bios_product_name = NULL;
+
+ /* Get product name */
+ pdata->bios_product_name = kmalloc(AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
+ if (!pdata->bios_product_name)
+ return -ENOMEM;
+
+ memset(pdata->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+ ret = adv_ec_get_productname(pdata->bios_product_name);
+ if (ret)
+ return ret;
+
+ /* Get pin table */
+ pdata->dym_tbl = kmalloc(EC_MAX_TBL_NUM*sizeof(struct Dynamic_Tab), GFP_KERNEL);
+ if (!pdata->dym_tbl)
+ return -ENOMEM;
+
+ ret = adv_get_dynamic_tab(pdata);
+
+ return 0;
+}
+
+static int adv_ec_parse_prop(struct adv_ec_platform_data *pdata)
+{
+ int i, ret;
+ u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
+
+ ret = device_property_read_u32(pdata->dev, "advantech,sub-dev-nb", &nb);
+ if (ret < 0) {
+ dev_err(pdata->dev, "get sub-dev-nb failed! (%d)", ret);
+ return ret;
+ }
+ pdata->sub_dev_nb = nb;
+
+ ret = device_property_read_u32_array(pdata->dev, "advantech,sub-dev", sub_dev, nb);
+ if (ret < 0) {
+ dev_err(pdata->dev, "get sub-dev failed! (%d)", ret);
+ return ret;
+ }
+
+ for (i = 0; i < nb; i++) {
+ switch (sub_dev[i]) {
+ case ADVEC_SUBDEV_BRIGHTNESS:
+ case ADVEC_SUBDEV_EEPROM:
+ case ADVEC_SUBDEV_GPIO:
+ case ADVEC_SUBDEV_HWMON:
+ case ADVEC_SUBDEV_LED:
+ case ADVEC_SUBDEV_WDT:
+ pdata->sub_dev_mask |= BIT(sub_dev[i]);
+ break;
+ default:
+ dev_err(pdata->dev, "invalid prop value(%d)!", sub_dev[i]);
+ }
+ }
+ dev_info(pdata->dev, "sub-dev mask = 0x%x", pdata->sub_dev_mask);
+
+ return 0;
+}
+
+static int adv_ec_probe(struct platform_device *pdev)
+{
+ int ret, i;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_platform_data *adv_ec_data;
+
+ adv_ec_data = kmalloc(sizeof(struct adv_ec_platform_data), GFP_KERNEL);
+ if (!adv_ec_data) {
+ ret = -ENOMEM;
+ goto err_plat_data;
+ }
+
+ dev_set_drvdata(dev, (void *)adv_ec_data);
+ adv_ec_data->dev = dev;
+
+ mutex_init(&lock);
+
+ ret = adv_ec_init_ec_data(adv_ec_data);
+ if (ret)
+ goto err_init_data;
+
+ ret = adv_ec_parse_prop(adv_ec_data);
+ if (ret)
+ goto err_prop;
+
+ for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
+ if (adv_ec_data->sub_dev_mask & BIT(i)) {
+ ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
+ if (ret)
+ dev_err(dev, "failed to add %s subdevice: %d",
+ adv_ec_sub_cells[i].name, ret);
+ }
+ }
+
+ dev_info(&pdev->dev, "Ver:%s, Data:%s, probe done",
+ ADVANTECH_EC_MFD_VER, ADVANTECH_EC_MFD_DATE);
+
+ return 0;
+
+err_prop:
+err_init_data:
+ kfree(adv_ec_data->dym_tbl);
+ kfree(adv_ec_data->bios_product_name);
+ kfree(adv_ec_data);
+
+err_plat_data:
+ return ret;
+}
+
+static int adv_ec_remove(struct platform_device *pdev)
+{
+ struct adv_ec_platform_data *adv_ec_data;
+
+ adv_ec_data = (struct adv_ec_platform_data *)dev_get_drvdata(&pdev->dev);
+
+ kfree(adv_ec_data->dym_tbl);
+ kfree(adv_ec_data->bios_product_name);
+ kfree(adv_ec_data);
+
+ mfd_remove_devices(&pdev->dev);
+ mutex_destroy(&lock);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id adv_ec_of_match[] = {
+ { .compatible = "advantech,ahc1ec0", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adv_ec_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id adv_ec_acpi_match[] = {
+ {"AHC1EC0", },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
+#endif
+
+static const struct platform_device_id adv_ec_id[] = {
+ { ADVANTECH_EC_NAME, },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, adv_ec_id);
+
+static struct platform_driver adv_ec_driver = {
+ .driver = {
+ .name = ADVANTECH_EC_NAME,
+#ifdef CONFIG_OF
+ .of_match_table = of_match_ptr(adv_ec_of_match),
+#endif
+#ifdef CONFIG_ACPI
+ .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
+#endif
+ },
+ .id_table = adv_ec_id,
+ .probe = adv_ec_probe,
+ .remove = adv_ec_remove,
+};
+module_platform_driver(adv_ec_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("sun.lang");
+MODULE_DESCRIPTION("Advantech EC MFD Driver.");
diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
new file mode 100644
index 000000000000..9c1991695305
--- /dev/null
+++ b/include/linux/mfd/ahc1ec0.h
@@ -0,0 +1,338 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __LINUX_MFD_AHC1EC0_H
+#define __LINUX_MFD_AHC1EC0_H
+
+#include <linux/device.h>
+
+#define uchar unsigned int
+
+#define EC_COMMAND_PORT 0x29A
+#define EC_STATUS_PORT 0x299
+
+#define EC_UDELAY_TIME 200
+#define EC_MAX_TIMEOUT_COUNT 5000
+
+/* AD command */
+#define EC_AD_INDEX_WRITE 0x15
+#define EC_AD_LSB_READ 0x16
+#define EC_AD_MSB_READ 0x1F
+
+/* voltage device id */
+#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
+#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
+#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
+#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
+#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
+#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
+#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
+#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
+#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
+#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
+#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
+#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
+#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
+#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
+#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
+#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
+#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
+#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
+#define EC_DID_DC 0x6B /* ADC. onboard voltage */
+#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
+#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
+#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
+
+/* Current device id */
+#define EC_DID_CURRENT 0x74
+
+/* ACPI commands */
+#define EC_ACPI_RAM_READ 0x80
+#define EC_ACPI_RAM_WRITE 0x81
+
+/*
+ * Dynamic control table commands
+ * The table includes HW pin number,Device ID,and Pin polarity
+ */
+#define EC_TBL_WRITE_ITEM 0x20
+#define EC_TBL_GET_PIN 0x21
+#define EC_TBL_GET_DEVID 0x22
+#define EC_MAX_TBL_NUM 32
+
+/* LED Device ID table */
+#define EC_DID_LED_RUN 0xE1
+#define EC_DID_LED_ERR 0xE2
+#define EC_DID_LED_SYS_RECOVERY 0xE3
+#define EC_DID_LED_D105_G 0xE4
+#define EC_DID_LED_D106_G 0xE5
+#define EC_DID_LED_D107_G 0xE6
+
+/* LED control HW ram address 0xA0-0xAF */
+#define EC_HWRAM_LED_BASE_ADDR 0xA0
+#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
+#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
+#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
+#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
+
+/* LED control bit */
+#define LED_CTRL_ENABLE_BIT (1 << 4)
+#define LED_CTRL_INTCTL_BIT (1 << 5)
+#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
+#define LED_CTRL_POLARITY_MASK (0x000F << 0)
+#define LED_CTRL_INTCTL_EXTERNAL 0
+#define LED_CTRL_INTCTL_INTERNAL 1
+
+#define LED_DISABLE 0x0
+#define LED_ON 0x1
+#define LED_FAST 0x3
+#define LED_NORMAL 0x5
+#define LED_SLOW 0x7
+#define LED_MANUAL 0xF
+
+#define LED_CTRL_LEDBIT_DISABLE (0x0000)
+#define LED_CTRL_LEDBIT_ON (0x03FF)
+#define LED_CTRL_LEDBIT_FAST (0x02AA)
+#define LED_CTRL_LEDBIT_NORMAL (0x0333)
+#define LED_CTRL_LEDBIT_SLOW (0x03E0)
+
+/* Get the device name */
+#define AMI_BIOS_NAME "AMIBIOS"
+#define AMI_BIOS_NAME_ADDRESS 0x000FF400
+#define AMI_BIOS_NAME_LENGTH strlen(AMI_BIOS_NAME)
+#define AMI_ADVANTECH_BOARD_ID_ADDRESS 0x000FE840
+#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
+#define AMI_ADVANTECH_BOARD_NAME_ADDRESS 0x000FF550
+#define AMI_ADVANTECH_BOARD_NAME_LENGTH _ADVANTECH_BOARD_NAME_LENGTH
+#define AMI_UEFI_ADVANTECH_BOARD_NAME_ADDRESS 0x000F0000
+#define AMI_UEFI_ADVANTECH_BOARD_NAME_LENGTH 0xFFFF
+
+/*
+ * EC WDT commands
+ * EC can send multistage watchdog event. System can setup watchdog event
+ * independently to makeup event sequence.
+ */
+#define EC_WDT_START 0x28
+#define EC_WDT_STOP 0x29
+#define EC_WDT_RESET 0x2A
+#define EC_WDT_BOOTTMEWDT_STOP 0x2B
+#define EC_HW_RAM 0x89
+#define EC_EVENT_FLAG 0x57
+#define EC_RESET_EVENT 0x04
+#define EC_COMMANS_PORT_IBF_MASK 0x02
+#define EC_ENABLE_DELAY_L 0x59
+#define EC_ENABLE_DELAY_H 0x58
+#define EC_POWER_BTN_TIME_L 0x5B
+#define EC_POWER_BTN_TIME_H 0x5A
+#define EC_RESET_DELAY_TIME_L 0x5F
+#define EC_RESET_DELAY_TIME_H 0x5E
+#define EC_PIN_DELAY_TIME_L 0x61
+#define EC_PIN_DELAY_TIME_H 0x60
+#define EC_SCI_DELAY_TIME_H 0x62
+#define EC_SCI_DELAY_TIME_L 0x63
+
+/* EC ACPI commands */
+#define EC_ACPI_DATA_READ 0x80
+#define EC_ACPI_DATA_WRITE 0x81
+
+/* Brightness ACPI Addr */
+#define BRIGHTNESS_ACPI_ADDR 0x50
+
+/* EC HW Ram commands */
+#define EC_HW_EXTEND_RAM_READ 0x86
+#define EC_HW_EXTEND_RAM_WRITE 0x87
+#define EC_HW_RAM_READ 0x88
+#define EC_HW_RAM_WRITE 0x89
+
+/* EC Smbus commands */
+#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
+#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
+#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
+
+/* Smbus transmit protocol */
+#define EC_SMBUS_PROTOCOL 0x00
+
+/* SMBUS status */
+#define EC_SMBUS_STATUS 0x01
+
+/* SMBUS device slave address (bit0 must be 0) */
+#define EC_SMBUS_SLV_ADDR 0x02
+
+/* SMBUS device command */
+#define EC_SMBUS_CMD 0x03
+
+/* 0x04-0x24 Data In read process, return data are stored in this address */
+#define EC_SMBUS_DATA 0x04
+
+#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
+
+/* SMBUS channel selector (0-4) */
+#define EC_SMBUS_CHANNEL 0x2B
+
+/* EC SMBUS transmit Protocol code */
+#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
+#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
+#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
+#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
+#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
+#define SMBUS_BYTE_READ 0x07 /* Read Byte */
+#define SMBUS_WORD_WRITE 0x08 /* Write Word */
+#define SMBUS_WORD_READ 0x09 /* Read Word */
+#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
+#define SMBUS_BLOCK_READ 0x0B /* Read Block */
+#define SMBUS_PROC_CALL 0x0C /* Process Call */
+#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
+#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
+#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
+
+/* GPIO control commands */
+#define EC_GPIO_INDEX_WRITE 0x10
+#define EC_GPIO_STATUS_READ 0x11
+#define EC_GPIO_STATUS_WRITE 0x12
+#define EC_GPIO_DIR_READ 0x1D
+#define EC_GPIO_DIR_WRITE 0x1E
+
+/* One Key Recovery commands */
+#define EC_ONE_KEY_FLAG 0x9C
+
+/* ASG OEM commands */
+#define EC_ASG_OEM 0xEA
+#define EC_ASG_OEM_READ 0x00
+#define EC_ASG_OEM_WRITE 0x01
+#define EC_OEM_POWER_STATUS_VIN1 0X10
+#define EC_OEM_POWER_STATUS_VIN2 0X11
+#define EC_OEM_POWER_STATUS_BAT1 0X12
+#define EC_OEM_POWER_STATUS_BAT2 0X13
+
+/* GPIO DEVICE ID */
+#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
+#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
+#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
+#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
+#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
+#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
+#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
+#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
+
+/* Lmsensor Chip Register */
+#define NSLM96163_CHANNEL 0x02
+
+/* NS_LM96163 address 0x98 */
+#define NSLM96163_ADDR 0x98
+
+/* LM96163 index(0x00) Local Temperature (Signed MSB) */
+#define NSLM96163_LOC_TEMP 0x00
+
+#define F75387_REG_R_MANU_ID 0x5D
+#define F75387_REG_R_CHIP_ID 0x5A
+
+#define LMF75387_MANU_ID_FINTEK 0x1934 //VENDOR ID
+#define LMF75387_CHIP_ID_F75387 0x0410 //CHIPID
+
+/* Lmsensor Chip SMUBS Slave Address */
+#define LMF75387_SMBUS_SLAVE_ADDRESS_5C 0x5c
+#define LMF75387_SMBUS_SLAVE_ADDRESS_5A 0x5A
+#define INA266_SMBUS_SLAVE_ADDRESS_8A 0x8A
+
+/* Temperature */
+#define F75387_REG_R_TEMP0_MSB 0x14 /* 1 degree */
+#define F75387_REG_R_TEMP0_LSB 0x1A /* 1/256 degree */
+
+#define F75387_REG_R_TEMP1_MSB 0x15 /* 1 degree */
+#define F75387_REG_R_TEMP1_LSB 0x1B /* 1/256 degree */
+
+/* LOCAL Temperature */
+#define F75387_REG_R_TEMP2_MSB 0x1C /* local temp., 1 degree */
+#define F75387_REG_R_TEMP2_LSB 0x1D /* 1/256 degree */
+
+/* Voltage */
+#define F75387_REG_R_V1 0x11 /* 8mV */
+#define F75387_REG_R_V2 0x12 /* 8mV */
+#define F75387_REG_R_V3 0x13 /* 8mV */
+
+/* HWMON registers */
+#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
+#define INA266_REG_POWER 0x03 /* 25mW */
+#define INA266_REG_CURRENT 0x04 /* 1mA */
+
+struct HW_PIN_TBL {
+ uchar vbat[2];
+ uchar v5[2];
+ uchar v12[2];
+ uchar vcore[2];
+ uchar vdc[2];
+ uchar ec_current[2];
+ uchar power[2];
+};
+
+struct Dynamic_Tab {
+ uchar DeviceID;
+ uchar HWPinNumber;
+};
+
+struct EC_SMBOEM0 {
+ uchar HWPinNumber;
+};
+
+struct EC_READ_HW_RAM {
+ unsigned int addr;
+ unsigned int data;
+};
+
+struct EC_WRITE_HW_RAM {
+ unsigned int addr;
+ unsigned int data;
+};
+
+struct EC_SMBUS_WORD_DATA {
+ unsigned char Channel;
+ unsigned char Address;
+ unsigned char Register;
+ unsigned short Value;
+};
+
+struct EC_SMBUS_READ_BYTE {
+ unsigned char Channel;
+ unsigned char Address;
+ unsigned char Register;
+ unsigned char Data;
+};
+
+struct EC_SMBUS_WRITE_BYTE {
+ unsigned char Channel;
+ unsigned char Address;
+ unsigned char Register;
+ unsigned char Data;
+};
+
+struct pled_hw_pin_tbl {
+ uchar pled[6];
+};
+
+struct adv_ec_platform_data {
+ char *bios_product_name;
+ int sub_dev_nb;
+ u32 sub_dev_mask;
+
+ struct device *dev;
+ struct class *adv_ec_class;
+
+ struct Dynamic_Tab *dym_tbl;
+};
+
+int read_ad_value(uchar hwpin, uchar multi);
+int read_acpi_value(uchar addr, uchar *pvalue);
+int write_hw_ram(uchar addr, uchar data);
+int write_hwram_command(uchar data);
+int smbus_read_word(struct EC_SMBUS_WORD_DATA *ptr_ec_smbus_word_data);
+int smbus_read_byte(struct EC_SMBUS_READ_BYTE *ptr_ec_smbus_read_byte);
+int write_acpi_value(uchar addr, uchar value);
+int read_gpio_status(uchar PinNumber, uchar *pvalue);
+int write_gpio_status(uchar PinNumber, uchar value);
+int read_gpio_dir(uchar PinNumber, uchar *pvalue);
+int write_gpio_dir(uchar PinNumber, uchar value);
+int write_hw_extend_ram(uchar addr, uchar data);
+int smbus_write_byte(struct EC_SMBUS_WRITE_BYTE *ptr_ec_smbus_write_byte);
+int read_onekey_status(uchar addr, uchar *pdata);
+int write_onekey_status(uchar addr);
+int ec_oem_get_status(uchar addr, uchar *pdata);
+int ec_oem_set_status(uchar addr, uchar pdata);
+
+#endif /* __LINUX_MFD_AHC1EC0_H */
--
2.17.1