[PATCH v7 0/8] Add support for ipq8064 tsens

[Ansuel Smith]

This patchset convert msm8960 to reg_filed, use int_common instead 
of a custom function and fix wrong tsens get_temp function for msm8960.
Ipq8064 SoCs tsens driver is based on 8960 tsens driver. Ipq8064 needs
to be registered as a gcc child as the tsens regs on this platform are
shared with the controller.
This is based on work and code here
https://git.linaro.org/people/amit.kucheria/kernel.git/log/?h=wrk3/tsens-8960-breakage

v7:
* Rework calibrate function to use get_temp_common
* Fix wrong required in the Documentation for ipq8064
* Fix hardware bug in sensor enable function
v6:
* Fix spelling error (can't find the problem with variable misallignment)
* Rework big if-else
* Remove extra comments
* Add description about different interrupts
v5:
* Conver driver to use reg_fiedl
* Use init_common 
* Drop custom set_trip and set_interrupt
* Use common set_trip and set_interrupt
* Fix bad get_temp function
* Add missing hardcoded slope
v4:
* Fix compilation error and warning reported by the bot
v3:
* Change driver to register as child instead of use phandle
v2:
* Fix dt-bindings problems

Ansuel Smith (8):
  drivers: thermal: tsens: Add VER_0 tsens version
  drivers: thermal: tsens: Don't hardcode sensor slope
  drivers: thermal: tsens: Convert msm8960 to reg_field
  drivers: thermal: tsens: Use init_common for msm8960
  drivers: thermal: tsens: Fix bug in sensor enable for msm8960
  driver: thermal: tsens: Use get_temp_common for msm8960
  drivers: thermal: tsens: Add support for ipq8064-tsens
  dt-bindings: thermal: tsens: Document ipq8064 bindings

 .../bindings/thermal/qcom-tsens.yaml          | 103 ++++++---
 drivers/thermal/qcom/tsens-8960.c             | 198 ++++++++++--------
 drivers/thermal/qcom/tsens.c                  | 172 ++++++++++++---
 drivers/thermal/qcom/tsens.h                  |   8 +-
 4 files changed, 335 insertions(+), 146 deletions(-)

-- 
2.29.2