[PATCH 4.14 35/50] net: ena: set initial DMA width to avoid intel iommu issue

From: Greg Kroah-Hartman
Date: Tue Dec 01 2020 - 03:59:19 EST


From: Shay Agroskin <shayagr@xxxxxxxxxx>

[ Upstream commit 09323b3bca95181c0da79daebc8b0603e500f573 ]

The ENA driver uses the readless mechanism, which uses DMA, to find
out what the DMA mask is supposed to be.

If DMA is used without setting the dma_mask first, it causes the
Intel IOMMU driver to think that ENA is a 32-bit device and therefore
disables IOMMU passthrough permanently.

This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48
before readless initialization in
ena_device_init()->ena_com_mmio_reg_read_request_init(),
which is large enough to workaround the intel_iommu issue.

DMA mask is set again to the correct value after it's received from the
device after readless is initialized.

The patch also changes the driver to use dma_set_mask_and_coherent()
function instead of the two pci_set_dma_mask() and
pci_set_consistent_dma_mask() ones. Both methods achieve the same
effect.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Mike Cui <mikecui@xxxxxxxxxx>
Signed-off-by: Arthur Kiyanovski <akiyano@xxxxxxxxxx>
Signed-off-by: Shay Agroskin <shayagr@xxxxxxxxxx>
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index d9ece9ac6f53c..938170b91f85e 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -2474,16 +2474,9 @@ static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev,
goto err_mmio_read_less;
}

- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(dma_width));
+ rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(dma_width));
if (rc) {
- dev_err(dev, "pci_set_dma_mask failed 0x%x\n", rc);
- goto err_mmio_read_less;
- }
-
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(dma_width));
- if (rc) {
- dev_err(dev, "err_pci_set_consistent_dma_mask failed 0x%x\n",
- rc);
+ dev_err(dev, "dma_set_mask_and_coherent failed %d\n", rc);
goto err_mmio_read_less;
}

@@ -3141,6 +3134,12 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
}

+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(ENA_MAX_PHYS_ADDR_SIZE_BITS));
+ if (rc) {
+ dev_err(&pdev->dev, "dma_set_mask_and_coherent failed %d\n", rc);
+ goto err_disable_device;
+ }
+
pci_set_master(pdev);

ena_dev = vzalloc(sizeof(*ena_dev));
--
2.27.0