Re: [PATCH v1 1/1] mfd: intel-m10-bmc: expose mac address and count

From: Tom Rix
Date: Wed Dec 02 2020 - 08:45:48 EST



On 12/1/20 12:36 PM, Russ Weight wrote:
> Create two sysfs entries for exposing the MAC address
> and count from the MAX10 BMC register space.
>
> Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
> Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> ---
> .../ABI/testing/sysfs-driver-intel-m10-bmc | 20 +++++++++
> drivers/mfd/intel-m10-bmc.c | 43 +++++++++++++++++++
> include/linux/mfd/intel-m10-bmc.h | 9 ++++
> 3 files changed, 72 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
> index 979a2d62513f..c4febaefe0a7 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
> @@ -13,3 +13,23 @@ Contact: Xu Yilun <yilun.xu@xxxxxxxxx>
> Description: Read only. Returns the firmware version of Intel MAX10
> BMC chip.
> Format: "0x%x".
> +
> +What: /sys/bus/spi/devices/.../mac_address
> +Date: December 2020
> +KernelVersion: 5.11
> +Contact: Russ Weight <russell.h.weight@xxxxxxxxx>
> +Description: Read only. Returns the base mac address assigned to
> + the board managed by the Intel MAX10 BMC. It is
> + stored in flash and is mirrored in the MAX10 BMC
> + register space.
> + Format: "%02x:%02x:%02x:%02x:%02x:%02x".
> +
> +What: /sys/bus/spi/devices/.../mac_count
> +Date: December 2020
> +KernelVersion: 5.11
> +Contact: Russ Weight <russell.h.weight@xxxxxxxxx>
> +Description: Read only. Returns the number of mac addresses
> + assigned to the board managed by the Intel MAX10
> + BMC. This value is stored in flash and is mirrored
> + in the MAX10 BMC register space.
> + Format: "%u".
> diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
> index b84579b7b4f0..90720e84900e 100644
> --- a/drivers/mfd/intel-m10-bmc.c
> +++ b/drivers/mfd/intel-m10-bmc.c
> @@ -60,9 +60,52 @@ static ssize_t bmcfw_version_show(struct device *dev,
> }
> static DEVICE_ATTR_RO(bmcfw_version);
>
> +static ssize_t mac_address_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct intel_m10bmc *max10 = dev_get_drvdata(dev);
> + unsigned int macaddr1, macaddr2;
> + int ret;
> +
> + ret = m10bmc_sys_read(max10, M10BMC_MACADDR1, &macaddr1);
> + if (ret)
> + return ret;
> +
> + ret = m10bmc_sys_read(max10, M10BMC_MACADDR2, &macaddr2);
> + if (ret)
> + return ret;
> +

The mac_count implies there are more than 1 mac address.

This logic looks like could only do one.

How are the 2nd, 3rd  etc. mac addresses found ?

> + return sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
> + (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr1),
> + (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr1),
> + (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr1),
> + (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr1),
> + (u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr2),
> + (u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr2));

consider using sysfs_emit over sprintf

Tom

> +}
> +static DEVICE_ATTR_RO(mac_address);
> +
> +static ssize_t mac_count_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct intel_m10bmc *max10 = dev_get_drvdata(dev);
> + unsigned int macaddr2;
> + int ret;
> +
> + ret = m10bmc_sys_read(max10, M10BMC_MACADDR2, &macaddr2);
> + if (ret)
> + return ret;
> +
> + return sprintf(buf, "%u\n",
> + (u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr2));
> +}
> +static DEVICE_ATTR_RO(mac_count);
> +
> static struct attribute *m10bmc_attrs[] = {
> &dev_attr_bmc_version.attr,
> &dev_attr_bmcfw_version.attr,
> + &dev_attr_mac_address.attr,
> + &dev_attr_mac_count.attr,
> NULL,
> };
> ATTRIBUTE_GROUPS(m10bmc);
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index c8ef2f1654a4..2279e34f0814 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -15,6 +15,15 @@
>
> /* Register offset of system registers */
> #define NIOS2_FW_VERSION 0x0
> +#define M10BMC_MACADDR1 0x10
> +#define M10BMC_MAC_BYTE4 GENMASK(7, 0)
> +#define M10BMC_MAC_BYTE3 GENMASK(15, 8)
> +#define M10BMC_MAC_BYTE2 GENMASK(23, 16)
> +#define M10BMC_MAC_BYTE1 GENMASK(31, 24)
> +#define M10BMC_MACADDR2 0x14
> +#define M10BMC_MAC_BYTE6 GENMASK(7, 0)
> +#define M10BMC_MAC_BYTE5 GENMASK(15, 8)
> +#define M10BMC_MAC_COUNT GENMASK(23, 16)
> #define M10BMC_TEST_REG 0x3c
> #define M10BMC_BUILD_VER 0x68
> #define M10BMC_VER_MAJOR_MSK GENMASK(23, 16)