Re: [PATCH 3/3] ARM: dts: exynos: Fix charging regulator voltage and current for i9100

[Krzysztof Kozlowski]

On Thu, Dec 03, 2020 at 10:23:01AM +0200, Krzysztof Kozlowski wrote:
> On Thu, Dec 03, 2020 at 05:46:03AM +0000, Timon Bätz wrote:
> > On Wednesday, December 2, 2020 11:04 PM, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > 
> > > On Wed, Dec 02, 2020 at 09:07:28PM +0000, Timon Baetz wrote:
> > >
> > > > Set CHARGER current and CHARGER_CV voltage according to Galaxy S2 kernel
> > > > fork.
> > > >
> > > > Signed-off-by: Timon Baetz timon.baetz@xxxxxxxxxxxxxx
> > > >
> > > > ------------------------------------------------------
> > > >
> > > > arch/arm/boot/dts/exynos4210-i9100.dts | 8 ++++----
> > > > 1 file changed, 4 insertions(+), 4 deletions(-)
> > > > diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
> > > > index 9f8d927e0d21..2700d53ea01b 100644
> > > > --- a/arch/arm/boot/dts/exynos4210-i9100.dts
> > > > +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
> > > > @@ -558,14 +558,14 @@ safe2_sreg: ESAFEOUT2 {
> > > >
> > > >       	charger_reg: CHARGER {
> > > >       		regulator-name = "CHARGER";
> > > >
> > > >
> > > > -       		regulator-min-microamp = <60000>;
> > > >
> > > >
> > > > -       		regulator-max-microamp = <2580000>;
> > > >
> > > >
> > > >
> > > > -       		regulator-min-microamp = <200000>;
> > > >
> > > >
> > > > -       		regulator-max-microamp = <950000>;
> > > >         	};
> > > >
> > > >         	chargercv_reg: CHARGER_CV {
> > > >         		regulator-name = "CHARGER_CV";
> > > >
> > > >
> > > >
> > > > -       		regulator-min-microvolt = <3800000>;
> > > >
> > > >
> > > > -       		regulator-max-microvolt = <4100000>;
> > > >
> > > >
> > > >
> > > > -       		regulator-min-microvolt = <4200000>;
> > > >
> > > >
> > > > -       		regulator-max-microvolt = <4200000>;
> > > >
> > > >
> > >
> > > I am looking at my sources of Android 3.0 for GT-I9100 but I cannot find
> > > charger voltages for it. Where did you find it?
> > >
> > > Best regards,
> > > Krzysztof
> > 
> > Thanks all the feedback Krzysztof,
> > 
> > Voltage is set in the charger probe function of the downstream kernel fork: https://github.com/LineageOS/android_kernel_samsung_smdk4412/blob/lineage-17.0/drivers/power/max8997_charger_u1.c#L390-L391
> 
> You need to fix your email client to wrap lines.
> 
> The fork cannot be used as a reference because of poor quality of
> explanations for origins of the code.
> 
> The commit which added 4.2 V is described as "samsung update 1" which
> basically means nothing. If at least it was "drop sources of
> GT-I9105"... but in this form it is useless.
> 
> For the things we are not sure how they should be implemented, we
> sometimes accept the reason "vendor sources do like this". However Lineage
> or any other fork are not vendor sources.
> 
> Therefore you need to provide a valid explanation for this voltage
> change.

I checked vendor sources for Samsung Galaxy S2 Epic 4G Touch (SPH-D710)
and indeed it uses the max8997 charger U1 which sets v4.2 volts.

You can use it to fix up the commit msg.

Unfortunately it seems Samsung started to remove most of older
kernel source code from their OS compliance page. S1, S2 and S3 are
mostly gone. I was able to find just few remaining sources and I am now
updating my vendor-dump with them. I'll upload them later to
https://github.com/krzk/linux-vendor-backup .

Best regards,
Krzysztof