Re: [PATCH v7 2/7] mtd: spi-nor: ignore errors in spi_nor_unlock_all()

From: Tudor.Ambarus
Date: Thu Dec 03 2020 - 09:37:35 EST


On 12/3/20 1:00 AM, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Just try to unlock the whole SPI-NOR flash array. Don't abort the
> probing in case of an error. Justifications:
> (1) For some boards, this just works because
> spi_nor_write_16bit_sr_and_check() is broken and just checks the
> second half of the 16bit. Once that will be fixed, SPI probe will
> fail for boards which has hardware-write protected SPI-NOR flashes.
> (2) Until now, hardware write-protection was the only viable solution
> to use the block protection bits. This is because this very
> function spi_nor_unlock_all() will be called unconditionally on
> every linux boot. Therefore, this bits only makes sense in
> combination with the hardware write-protection. If we would fail
> the SPI probe on an error in spi_nor_unlock_all() we'd break
> virtually all users of the block protection bits.
> (3) We should try hard to keep the MTD working even if the flash might
> not be writable/erasable.
>
> Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
> Signed-off-by: Michael Walle <michael@xxxxxxxx>

Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

> ---
> changes since v6:
> - new patch
>
> drivers/mtd/spi-nor/core.c | 23 +++++++++++++----------
> 1 file changed, 13 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 5bee7c8da4dc..013198abe929 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -3121,20 +3121,27 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
> }
>
> /**
> - * spi_nor_unlock_all() - Unlocks the entire flash memory array.
> + * spi_nor_try_unlock_all() - Tries to unlock the entire flash memory array.
> * @nor: pointer to a 'struct spi_nor'.
> *
> * Some SPI NOR flashes are write protected by default after a power-on reset
> * cycle, in order to avoid inadvertent writes during power-up. Backward
> * compatibility imposes to unlock the entire flash memory array at power-up
> * by default.
> + *
> + * Unprotecting the entire flash array will fail for boards which are hardware
> + * write-protected. Thus any errors are ignored.
> */
> -static int spi_nor_unlock_all(struct spi_nor *nor)
> +static void spi_nor_try_unlock_all(struct spi_nor *nor)
> {
> - if (nor->flags & SNOR_F_HAS_LOCK)
> - return spi_nor_unlock(&nor->mtd, 0, nor->params->size);
> + int ret;
>
> - return 0;
> + if (!(nor->flags & SNOR_F_HAS_LOCK))
> + return;
> +
> + ret = spi_nor_unlock(&nor->mtd, 0, nor->params->size);
> + if (ret)
> + dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
> }
>
> static int spi_nor_init(struct spi_nor *nor)
> @@ -3153,11 +3160,7 @@ static int spi_nor_init(struct spi_nor *nor)
> return err;
> }
>
> - err = spi_nor_unlock_all(nor);
> - if (err) {
> - dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
> - return err;
> - }
> + spi_nor_try_unlock_all(nor);
>
> if (nor->addr_width == 4 &&
> nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
> --
> 2.20.1
>