Re: [PATCH 3/3] perf tools: Allow to list events via control file

From: Alexei Budankov
Date: Mon Dec 07 2020 - 12:10:38 EST

Next message: Peter Maydell: "Re: [PATCH v5 0/2] MTE support for KVM guest"
Previous message: Rob Herring: "Re: [PATCH 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller"
In reply to: Arnaldo Carvalho de Melo: "Re: [PATCH 3/3] perf tools: Allow to list events via control file"
Next in thread: Jiri Olsa: "Re: [PATCH 3/3] perf tools: Allow to list events via control file"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On 07.12.2020 19:28, Arnaldo Carvalho de Melo wrote:
> Em Sun, Dec 06, 2020 at 06:05:19PM +0100, Jiri Olsa escreveu:
>> Adding new control event to display all evlist events.
>>
>> The interface string for control file is 'list'. When
>> received, perf will scan and print current evlist into
>> perf record terminal.
>>
>> Example session:
>>
>> terminal 1:
>> # mkfifo control ack perf.pipe
>> # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe
>> Events disabled
>>
>> terminal 2:
>> # echo list > control
>>
>> terminal 1:
>> # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe
>> ...
>> sched:sched_kthread_stop
>> sched:sched_kthread_stop_ret
>> sched:sched_waking
>> sched:sched_wakeup
>> sched:sched_wakeup_new
>> sched:sched_switch
>> sched:sched_migrate_task
>> sched:sched_process_free
>> sched:sched_process_exit
>> sched:sched_wait_task
>> sched:sched_process_wait
>> sched:sched_process_fork
>> sched:sched_process_exec
>> sched:sched_stat_wait
>> sched:sched_stat_sleep
>> sched:sched_stat_iowait
>> sched:sched_stat_blocked
>> sched:sched_stat_runtime
>> sched:sched_pi_setprio
>> sched:sched_move_numa
>> sched:sched_stick_numa
>> sched:sched_swap_numa
>> sched:sched_wake_idle_without_ipi
>> dummy:HG
>>
>> This new command is handy to get real event names when
>> wildcards are used.
>
> Ok, would be nice to have a verbose mode like:
>
> [acme@five ~]$ sudo ~acme/bin/perf record -e 'sched:*' sleep 0.001
> [ perf record: Woken up 14 times to write data ]
> [ perf record: Captured and wrote 0.023 MB perf.data (16 samples) ]
> [acme@five ~]$ sudo ~acme/bin/perf evlist
> sched:sched_kthread_stop
> sched:sched_kthread_stop_ret
> sched:sched_waking
> sched:sched_wakeup
> sched:sched_wakeup_new
> sched:sched_switch
> sched:sched_migrate_task
> sched:sched_process_free
> sched:sched_process_exit
> sched:sched_wait_task
> sched:sched_process_wait
> sched:sched_process_fork
> sched:sched_process_exec
> sched:sched_stat_wait
> sched:sched_stat_sleep
> sched:sched_stat_iowait
> sched:sched_stat_blocked
> sched:sched_stat_runtime
> sched:sched_pi_setprio
> sched:sched_move_numa
> sched:sched_stick_numa
> sched:sched_swap_numa
> sched:sched_wake_idle_without_ipi
> # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
> [acme@five ~]$ sudo ~acme/bin/perf evlist -v
> sched:sched_kthread_stop: type: 2, size: 120, config: 0x13f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
> sched:sched_kthread_stop_ret: type: 2, size: 120, config: 0x13e, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_waking: type: 2, size: 120, config: 0x13d, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_wakeup: type: 2, size: 120, config: 0x13c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_wakeup_new: type: 2, size: 120, config: 0x13b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_switch: type: 2, size: 120, config: 0x13a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_migrate_task: type: 2, size: 120, config: 0x139, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_process_free: type: 2, size: 120, config: 0x138, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_process_exit: type: 2, size: 120, config: 0x137, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_wait_task: type: 2, size: 120, config: 0x136, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_process_wait: type: 2, size: 120, config: 0x135, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_process_fork: type: 2, size: 120, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_process_exec: type: 2, size: 120, config: 0x133, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_stat_wait: type: 2, size: 120, config: 0x132, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_stat_sleep: type: 2, size: 120, config: 0x131, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_stat_iowait: type: 2, size: 120, config: 0x130, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_stat_blocked: type: 2, size: 120, config: 0x12f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_stat_runtime: type: 2, size: 120, config: 0x12e, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_pi_setprio: type: 2, size: 120, config: 0x12d, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_move_numa: type: 2, size: 120, config: 0x12c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_stick_numa: type: 2, size: 120, config: 0x12b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_swap_numa: type: 2, size: 120, config: 0x12a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> sched:sched_wake_idle_without_ipi: type: 2, size: 120, config: 0x129, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
> # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
> [acme@five ~]$
>
> Also I think we should use 'evlist' instead of 'list', to be consistent.

FWIW,

Or may be even name the command starting with a verb like 'list_events'

Thanks,
Alexei

>
> Applied 1/3 and 2/3.
>
> - Arnaldo
>
>> Signed-off-by: Jiri Olsa <jolsa@xxxxxxxxxx>
>> ---
>> tools/perf/builtin-record.c | 1 +
>> tools/perf/builtin-stat.c | 1 +
>> tools/perf/util/evlist.c | 6 ++++++
>> tools/perf/util/evlist.h | 2 ++
>> 4 files changed, 10 insertions(+)
>>
>> diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
>> index 582b8fba012c..f620ed056c89 100644
>> --- a/tools/perf/builtin-record.c
>> +++ b/tools/perf/builtin-record.c
>> @@ -1951,6 +1951,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
>> case EVLIST_CTL_CMD_UNSUPPORTED:
>> case EVLIST_CTL_CMD_ENABLE_EVSEL:
>> case EVLIST_CTL_CMD_DISABLE_EVSEL:
>> + case EVLIST_CTL_CMD_LIST:
>> default:
>> break;
>> }
>> diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
>> index 6a21fb665008..56f2206b5991 100644
>> --- a/tools/perf/builtin-stat.c
>> +++ b/tools/perf/builtin-stat.c
>> @@ -592,6 +592,7 @@ static void process_evlist(struct evlist *evlist, unsigned int interval)
>> case EVLIST_CTL_CMD_UNSUPPORTED:
>> case EVLIST_CTL_CMD_ENABLE_EVSEL:
>> case EVLIST_CTL_CMD_DISABLE_EVSEL:
>> + case EVLIST_CTL_CMD_LIST:
>> default:
>> break;
>> }
>> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
>> index 05723227bebf..c05476ca2ff4 100644
>> --- a/tools/perf/util/evlist.c
>> +++ b/tools/perf/util/evlist.c
>> @@ -1931,6 +1931,9 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd,
>> (sizeof(EVLIST_CTL_CMD_SNAPSHOT_TAG)-1))) {
>> *cmd = EVLIST_CTL_CMD_SNAPSHOT;
>> pr_debug("is snapshot\n");
>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_LIST_TAG,
>> + (sizeof(EVLIST_CTL_CMD_LIST_TAG)-1))) {
>> + *cmd = EVLIST_CTL_CMD_LIST;
>> }
>> }
>>
>> @@ -1995,6 +1998,9 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd)
>> pr_info("failed: can't find %s event\n", evsel_name);
>> }
>> break;
>> + case EVLIST_CTL_CMD_LIST:
>> + evlist__for_each_entry(evlist, evsel)
>> + pr_info("%s\n", evsel__name(evsel));
>> case EVLIST_CTL_CMD_SNAPSHOT:
>> break;
>> case EVLIST_CTL_CMD_ACK:
>> diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
>> index e4e8ff8831a3..6b8a9918fdb2 100644
>> --- a/tools/perf/util/evlist.h
>> +++ b/tools/perf/util/evlist.h
>> @@ -332,6 +332,7 @@ struct evsel *evlist__reset_weak_group(struct evlist *evlist, struct evsel *evse
>> #define EVLIST_CTL_CMD_SNAPSHOT_TAG "snapshot"
>> #define EVLIST_CTL_CMD_ENABLE_EVSEL_TAG "enable-"
>> #define EVLIST_CTL_CMD_DISABLE_EVSEL_TAG "disable-"
>> +#define EVLIST_CTL_CMD_LIST_TAG "list"
>>
>> #define EVLIST_CTL_CMD_MAX_LEN 64
>>
>> @@ -343,6 +344,7 @@ enum evlist_ctl_cmd {
>> EVLIST_CTL_CMD_DISABLE_EVSEL,
>> EVLIST_CTL_CMD_ACK,
>> EVLIST_CTL_CMD_SNAPSHOT,
>> + EVLIST_CTL_CMD_LIST,
>> };
>>
>> int evlist__parse_control(const char *str, int *ctl_fd, int *ctl_fd_ack, bool *ctl_fd_close);
>> --
>> 2.26.2
>>
>

Next message: Peter Maydell: "Re: [PATCH v5 0/2] MTE support for KVM guest"
Previous message: Rob Herring: "Re: [PATCH 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller"
In reply to: Arnaldo Carvalho de Melo: "Re: [PATCH 3/3] perf tools: Allow to list events via control file"
Next in thread: Jiri Olsa: "Re: [PATCH 3/3] perf tools: Allow to list events via control file"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]