Re: [PATCH v2 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

[Rob Herring]

On Mon, Nov 30, 2020 at 04:11:38PM -0500, Jim Quinlan wrote:
> Quite similar to the regulator bindings found in "rockchip-pcie-host.txt",
> this allows optional regulators to be attached and controlled by the
> PCIe RC driver.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/brcm,stb-pcie.yaml       | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 807694b4f41f..baacc3d7ec87 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -85,6 +85,18 @@ properties:
>        minItems: 1
>        maxItems: 3
>  
> +  vpcie12v-supply:
> +    description: 12v regulator phandle for the endpoint device
> +
> +  vpcie3v3-supply:
> +    description: 3.3v regulator phandle for the endpoint device

12V and 3.3V are standard slot supplies, can you add them to 
pci-bus.yaml. Then some day maybe we can have common slot handling code.
 
With that, here you just need:

vpcie3v3-supply: true

> +
> +  vpcie1v8-supply:
> +    description: 1.8v regulator phandle for the endpoint device
> +
> +  vpcie0v9-supply:
> +    description: 0.9v regulator phandle for the endpoint device

These are not standard. They go to a soldered down device or 
non-standard connector? For the former, the device should really be 
described in DT and the supplies added there.

Mini PCIe connector also has 1.5V supply.

Rob