[PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

[Lukasz Majewski]

From: Mans Rullgard <mans@xxxxxxxxx>

Add pinmux setting for USB1 overcurrent on pwm2 pad.

Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
Changes for v2:
- Add S-o-B
---
 arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bbe52150b165..84d0176d5193 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -948,6 +948,16 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				usb1_pins_b: usb1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				usb0_id_pins_a: usb0id@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-- 
2.20.1