[PATCH v3 2/3] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
From: Douglas Anderson
Date: Wed Dec 09 2020 - 19:46:34 EST
There's currently a comment in the code saying function 0 is GPIO.
Instead of hardcoding it, let's add a member where an SoC can specify
it. No known SoCs use a number other than 0, but this just makes the
code clearer. NOTE: no SoC code needs to be updated since we can rely
on zero-initialization.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
(no changes since v1)
drivers/pinctrl/qcom/pinctrl-msm.c | 4 ++--
drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 77a25bdf0da7..588df91274e2 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -210,8 +210,8 @@ static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
if (!g->nfuncs)
return 0;
- /* For now assume function 0 is GPIO because it always is */
- return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
+ return msm_pinmux_set_mux(pctldev,
+ g->funcs[pctrl->soc->gpio_func], offset);
}
static const struct pinmux_ops msm_pinmux_ops = {
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index 333f99243c43..e31a5167c91e 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -118,6 +118,7 @@ struct msm_gpio_wakeirq_map {
* @wakeirq_dual_edge_errata: If true then GPIOs using the wakeirq_map need
* to be aware that their parent can't handle dual
* edge interrupts.
+ * @gpio_func: Which function number is GPIO (usually 0).
*/
struct msm_pinctrl_soc_data {
const struct pinctrl_pin_desc *pins;
@@ -134,6 +135,7 @@ struct msm_pinctrl_soc_data {
const struct msm_gpio_wakeirq_map *wakeirq_map;
unsigned int nwakeirq_map;
bool wakeirq_dual_edge_errata;
+ unsigned int gpio_func;
};
extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
--
2.29.2.576.ga3fc446d84-goog