[PATCH v2 6/6] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe
From: Kishon Vijay Abraham I
Date: Thu Dec 10 2020 - 08:12:57 EST
x2 lane PCIe slot in the common processor board is enabled and connected to
j7200 SOM. Add PCIe DT node in common processor board to reflect the
same.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
.../boot/dts/ti/k3-j7200-common-proc-board.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index def98f563336..4a7182abccf5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/mux/ti-serdes.h>
#include <dt-bindings/phy/phy.h>
@@ -241,3 +242,17 @@
resets = <&serdes_wiz0 3>;
};
};
+
+&pcie1_rc {
+ reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+};
+
+&pcie1_ep {
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+ status = "disabled";
+};
--
2.17.1