[PATCH 4.9 35/45] i2c: imx: Check for I2SR_IAL after every byte

[Greg Kroah-Hartman]

From: Christian Eggers <ceggers@xxxxxxx>

commit 1de67a3dee7a279ebe4d892b359fe3696938ec15 upstream.

Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.

Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/i2c/busses/i2c-imx.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -465,6 +465,16 @@ static int i2c_imx_trx_complete(struct i
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
 		return -ETIMEDOUT;
 	}
+
+	/* check for arbitration lost */
+	if (i2c_imx->i2csr & I2SR_IAL) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+
+		i2c_imx->i2csr = 0;
+		return -EAGAIN;
+	}
+
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
 	i2c_imx->i2csr = 0;
 	return 0;