Re: [patch 4/8] rtc: core: Make the sync offset default more realistic

[Alexandre Belloni]

Hi,

On 06/12/2020 22:46:17+0100, Thomas Gleixner wrote:
> The offset which is used to steer the start of an RTC synchronization
> update via rtc_set_ntp_time() is huge. The math behind this is:
> 
>   tsched       twrite(t2.tv_sec - 1) 	 t2 (seconds increment)
> 
> twrite - tsched is the transport time for the write to hit the device.
> 
> t2 - twrite depends on the chip and is for most chips one second.
> 
> The rtc_set_ntp_time() calculation of tsched is:
> 
>     tsched = t2 - 1sec - (t2 - twrite)
> 
> The default for the sync offset is 500ms which means that twrite - tsched
> is 500ms assumed that t2 - twrite is one second.
> 
> This is 0.5 seconds off for RTCs which are directly accessible by IO writes
> and probably for the majority of i2C/SPI based RTC off by an order of
> magnitude. Set it to 10ms which should bring it closer to reality.
> 
> The default can be adjusted by drivers (rtc_cmos does so) and could be
> adjusted further by a calibration method which is an orthogonal problem.
> 
> Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> ---
>  drivers/rtc/class.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/drivers/rtc/class.c
> +++ b/drivers/rtc/class.c
> @@ -201,7 +201,7 @@ static struct rtc_device *rtc_allocate_d
>  	device_initialize(&rtc->dev);
>  
>  	/* Drivers can revise this default after allocating the device. */
> -	rtc->set_offset_nsec =  NSEC_PER_SEC / 2;
> +	rtc->set_offset_nsec =  10 * NSEC_PER_MSEC;

I did retest, on a slow 100kHz i2c bus, with a fairly inconvenient RTC,
The maximum offset to set the RTC was 4845533ns so I'd say 10ms is too
large. Should we make that 5ms ?

Apart from that, on the series, you can add my
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com