[PATCH] drivers: block: skd: remove skd_pci_info()
From: Puranjay Mohan
Date: Fri Dec 11 2020 - 11:43:53 EST
PCI core calls __pcie_print_link_status() for every device, it prints
both the link width and the link speed. skd_pci_info() does the same
thing again, hence it can be removed.
Signed-off-by: Puranjay Mohan <puranjay12@xxxxxxxxx>
---
drivers/block/skd_main.c | 31 -------------------------------
1 file changed, 31 deletions(-)
diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index a962b4551bed..da7aac5335d9 100644
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -3134,40 +3134,11 @@ static const struct pci_device_id skd_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, skd_pci_tbl);
-static char *skd_pci_info(struct skd_device *skdev, char *str)
-{
- int pcie_reg;
-
- strcpy(str, "PCIe (");
- pcie_reg = pci_find_capability(skdev->pdev, PCI_CAP_ID_EXP);
-
- if (pcie_reg) {
-
- char lwstr[6];
- uint16_t pcie_lstat, lspeed, lwidth;
-
- pcie_reg += 0x12;
- pci_read_config_word(skdev->pdev, pcie_reg, &pcie_lstat);
- lspeed = pcie_lstat & (0xF);
- lwidth = (pcie_lstat & 0x3F0) >> 4;
-
- if (lspeed == 1)
- strcat(str, "2.5GT/s ");
- else if (lspeed == 2)
- strcat(str, "5.0GT/s ");
- else
- strcat(str, "<unknown> ");
- snprintf(lwstr, sizeof(lwstr), "%dX)", lwidth);
- strcat(str, lwstr);
- }
- return str;
-}
static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int i;
int rc = 0;
- char pci_str[32];
struct skd_device *skdev;
dev_dbg(&pdev->dev, "vendor=%04X device=%04x\n", pdev->vendor,
@@ -3201,8 +3172,6 @@ static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_regions;
}
- skd_pci_info(skdev, pci_str);
- dev_info(&pdev->dev, "%s 64bit\n", pci_str);
pci_set_master(pdev);
rc = pci_enable_pcie_error_reporting(pdev);
--
2.27.0