Re: [PATCH v2 5/9] spi: spi-mem: Allow masters to transfer dummy cycles directly by hardware

[Mark Brown]

On Fri, Dec 11, 2020 at 09:01:24AM -0800, Sowjanya Komatineni wrote:
> This patch adds a flag SPI_MASTER_USES_HW_DUMMY_CYCLES for the controllers
> that support transfer of dummy cycles by the hardware directly.
> 
> For controller with this flag set, spi-mem driver will skip dummy bytes
> transfer in the spi message.
> 
> Controller drivers can get the number of dummy cycles from spi_message.

Copying more people who've worked on spi-mem for their review - I've not
got such a good perspective on controller features.

> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
>  drivers/spi/spi-mem.c   | 18 +++++++++++-------
>  include/linux/spi/spi.h |  8 ++++++++
>  2 files changed, 19 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
> index f3a3f19..38a523b 100644
> --- a/drivers/spi/spi-mem.c
> +++ b/drivers/spi/spi-mem.c
> @@ -350,13 +350,17 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	}
>  
>  	if (op->dummy.nbytes) {
> -		memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
> -		xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
> -		xfers[xferpos].len = op->dummy.nbytes;
> -		xfers[xferpos].tx_nbits = op->dummy.buswidth;
> -		spi_message_add_tail(&xfers[xferpos], &msg);
> -		xferpos++;
> -		totalxferlen += op->dummy.nbytes;
> +		if (ctlr->flags & SPI_MASTER_USES_HW_DUMMY_CYCLES) {
> +			msg.dummy_cycles = (op->dummy.nbytes * 8) / op->dummy.buswidth;
> +		} else {
> +			memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
> +			xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
> +			xfers[xferpos].len = op->dummy.nbytes;
> +			xfers[xferpos].tx_nbits = op->dummy.buswidth;
> +			spi_message_add_tail(&xfers[xferpos], &msg);
> +			xferpos++;
> +			totalxferlen += op->dummy.nbytes;
> +		}
>  	}
>  
>  	if (op->data.nbytes) {
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index aa09fdc..2024149 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -512,6 +512,8 @@ struct spi_controller {
>  
>  #define SPI_MASTER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
>  
> +#define SPI_MASTER_USES_HW_DUMMY_CYCLES	BIT(6)	/* HW dummy bytes transfer */
> +
>  	/* flag indicating this is an SPI slave controller */
>  	bool			slave;
>  
> @@ -1022,6 +1024,12 @@ struct spi_message {
>  	unsigned		actual_length;
>  	int			status;
>  
> +	/*
> +	 * dummy cycles in the message transfer. This is used by the controller
> +	 * drivers supports transfer of dummy cycles directly by the hardware.
> +	 */
> +	u8			dummy_cycles;
> +
>  	/* for optional use by whatever driver currently owns the
>  	 * spi_message ...  between calls to spi_async and then later
>  	 * complete(), that's the spi_controller controller driver.
> -- 
> 2.7.4
>

Attachment: signature.asc
Description: PGP signature