[PATCH 12/18] arm64: dts: renesas: beacon: Better describe keys
From: Adam Ford
Date: Sun Dec 13 2020 - 13:41:37 EST
The keys on the baseboard are laid out in an diamond pattern, up, down,
left, right and center. Update the descriptions to make it easier to
read.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
.../dts/renesas/beacon-renesom-baseboard.dtsi | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index beaea6de547b..db3ef33faac5 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -40,38 +40,38 @@ hdmi0_con: endpoint {
keys {
compatible = "gpio-keys";
- key-1 {
+ key-1 { /* S19 */
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
- label = "Switch-1";
+ label = "Up";
wakeup-source;
debounce-interval = <20>;
};
- key-2 {
+ key-2 { /*S20 */
gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
- label = "Switch-2";
+ label = "Left";
wakeup-source;
debounce-interval = <20>;
};
- key-3 {
+ key-3 { /* S21 */
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
- label = "Switch-3";
+ label = "Down";
wakeup-source;
debounce-interval = <20>;
};
- key-4 {
+ key-4 { /* S22 */
gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
- label = "Switch-4";
+ label = "Right";
wakeup-source;
debounce-interval = <20>;
};
- key-5 {
+ key-5 { /* S23 */
gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_5>;
- label = "Switch-4";
+ label = "Center";
wakeup-source;
debounce-interval = <20>;
};
--
2.25.1