[PATCH 5.9 042/105] arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.

[Greg Kroah-Hartman]

From: Markus Reichl <m.reichl@xxxxxxxxxxxxx>

[ Upstream commit 7327c8b98e2e14c47021eea14d1ab268086a6408 ]

After patch [1] SD-card becomes mmc1 and eMMC becomes mmc2.
Correct trigger of LEDs accordingly.

[1]
https://patchwork.kernel.org/patch/11881427

Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20201104192933.1001-1-m.reichl@xxxxxxxxxxxxx
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index b85ec31cd2835..78ef0037ad4b5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -74,14 +74,14 @@
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc1";
+			linux,default-trigger = "mmc2";
 		};
 
 		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc0";
+			linux,default-trigger = "mmc1";
 		};
 	};
 
-- 
2.27.0