[PATCH] arm64: dts: qcom: sc7180: Drop pinconf on dp_hot_plug_det

[Stephen Boyd]

We shouldn't put any pinconf here in case someone decides to invert this
HPD signal or remove an external pull-down. It's better to leave that to
the board pinconf nodes, so drop it here.

Reported-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Tanmay Shah <tanmay@xxxxxxxxxxxxxx>
Fixes: 681a607ad21a ("arm64: dts: qcom: sc7180: Add DisplayPort HPD pin dt node")
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 22b832fc62e3..268fa40a1774 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1468,12 +1468,6 @@ pinmux {
 					pins = "gpio117";
 					function = "dp_hot";
 				};
-
-				pinconf {
-					pins = "gpio117";
-					bias-disable;
-					input-enable;
-				};
 			};
 
 			qspi_clk: qspi-clk {
-- 
https://chromeos.dev