Re: [PATCH 1/4] drm/bridge: nwl-dsi: Set PHY mode in nwl_dsi_enable()

[Guido Günther]

Hi,
On Tue, Dec 08, 2020 at 10:04:57AM +0100, Guido Günther wrote:
> Hi,
> On Fri, Dec 04, 2020 at 03:33:41PM +0800, Liu Ying wrote:
> > The Northwest Logic MIPI DSI host controller embedded in i.MX8qxp
> > works with a Mixel MIPI DPHY + LVDS PHY combo to support either
> > a MIPI DSI display or a LVDS display.  So, this patch calls
> > phy_set_mode() from nwl_dsi_enable() to set PHY mode to MIPI DPHY
> > explicitly.

Should i pull this patch in via drm-misc-next or is the whole series
supposed to go via the phy tree?
Cheers,
 -- Guido


> > 
> > Cc: Guido Günther <agx@xxxxxxxxxxx>
> > Cc: Robert Chiras <robert.chiras@xxxxxxx>
> > Cc: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> > Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> > Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> > Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Cc: Jonas Karlman <jonas@xxxxxxxxx>
> > Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > Cc: David Airlie <airlied@xxxxxxxx>
> > Cc: Daniel Vetter <daniel@xxxxxxxx>
> > Cc: NXP Linux Team <linux-imx@xxxxxxx>
> > Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> > ---
> >  drivers/gpu/drm/bridge/nwl-dsi.c | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
> > index 66b6740..be6bfc5 100644
> > --- a/drivers/gpu/drm/bridge/nwl-dsi.c
> > +++ b/drivers/gpu/drm/bridge/nwl-dsi.c
> > @@ -678,6 +678,12 @@ static int nwl_dsi_enable(struct nwl_dsi *dsi)
> >  		return ret;
> >  	}
> >  
> > +	ret = phy_set_mode(dsi->phy, PHY_MODE_MIPI_DPHY);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to set DSI phy mode: %d\n", ret);
> > +		goto uninit_phy;
> > +	}
> > +
> >  	ret = phy_configure(dsi->phy, phy_cfg);
> >  	if (ret < 0) {
> >  		DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret);
> 
> Reviewed-by: Guido Günther <agx@xxxxxxxxxxx> 
>  -- Guido
> 
> > -- 
> > 2.7.4
> > 
> 
>