dwc: tegra194: issue with card containing a bridge

[Mian Yousaf Kaukab]

Hi,
I am seeing an issue with next-20201211 with USB3380[1] based PCIe card
(vid:pid 10b5:3380) on Jetson AGX Xavier. Card doesn't show up in the
lspci output.

In non working case (next-20201211):
# lspci
0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)

In working case (v5.10-rc7):
# lspci
0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)
# lspci -t
-+-[0005:00]---00.0-[01-ff]----00.0-[02-03]----02.0-[03]----00.0
 +-[0001:00]---00.0-[01-ff]----00.0
 \-[0000:00]-
#lspci -v
https://paste.opensuse.org/87573209

git-bisect points to commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code").
dw_pcie_setup_rc() is not removed from pcie-tegra194.c in this commit.

Could the failure be caused because dw_pcie_setup_rc() is called twice now in case of tegra194?

BR,
Yousaf

[1]: https://www.broadcom.com/products/pcie-switches-bridges/usb-pci/usb-controllers/usb3380