[PATCH v6 4/9] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes

[Mirela Rabulea (OSS)]

From: Mirela Rabulea <mirela.rabulea@xxxxxxx>

Add jpeg decoder/encoder nodes, for now on imx8qxp only.
The same should work on imx8qm, but it was not tested.

Signed-off-by: Mirela Rabulea <mirela.rabulea@xxxxxxx>
---
Changes in v6:
  Pure memory-to-memory are typically not enabled per-board, but just per-platform
  Thanks Ezequiel for feedback.

 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index e46faac1fe71..ee822560af54 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -629,4 +629,39 @@
 			};
 		};
 	};
+
+	img_subsys: bus@58000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+		jpegdec: jpegdec@58400000 {
+			compatible = "nxp,imx8qxp-jpgdec";
+			reg = <0x58400000 0x00050000 >;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+					<&pd IMX_SC_R_MJPEG_DEC_S0>,
+					<&pd IMX_SC_R_MJPEG_DEC_S1>,
+					<&pd IMX_SC_R_MJPEG_DEC_S2>,
+					<&pd IMX_SC_R_MJPEG_DEC_S3>;
+		};
+
+		jpegenc: jpegenc@58450000 {
+			compatible = "nxp,imx8qxp-jpgenc";
+			reg = <0x58450000 0x00050000 >;
+			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+					<&pd IMX_SC_R_MJPEG_ENC_S0>,
+					<&pd IMX_SC_R_MJPEG_ENC_S1>,
+					<&pd IMX_SC_R_MJPEG_ENC_S2>,
+					<&pd IMX_SC_R_MJPEG_ENC_S3>;
+		};
+	};
 };
-- 
2.17.1