Re: [PATCH v2, 07/17] drm/mediatek: add disp config and mm 26mhz clock into mutex device
From: Nicolas Boichat
Date: Tue Dec 15 2020 - 08:39:55 EST
On Sat, Dec 12, 2020 at 12:12 PM Yongqiang Niu
<yongqiang.niu@xxxxxxxxxxxx> wrote:
>
> there are 2 more clock need enable for display.
> parser these clock when mutex device probe,
> enable and disable when mutex on/off
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 49 ++++++++++++++++++++++++++++------
> 1 file changed, 41 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index 60788c1..de618a1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -118,7 +118,7 @@ struct mtk_ddp_data {
>
> struct mtk_ddp {
> struct device *dev;
> - struct clk *clk;
> + struct clk *clk[3];
> void __iomem *regs;
> struct mtk_disp_mutex mutex[10];
> const struct mtk_ddp_data *data;
> @@ -257,14 +257,39 @@ int mtk_disp_mutex_prepare(struct mtk_disp_mutex *mutex)
> {
> struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> mutex[mutex->id]);
> - return clk_prepare_enable(ddp->clk);
> + int ret;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> + if (IS_ERR(ddp->clk[i]))
> + continue;
> + ret = clk_prepare_enable(ddp->clk[i]);
> + if (ret) {
> + pr_err("failed to enable clock, err %d. i:%d\n",
> + ret, i);
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + while (--i >= 0)
> + clk_disable_unprepare(ddp->clk[i]);
> + return ret;
> }
>
> void mtk_disp_mutex_unprepare(struct mtk_disp_mutex *mutex)
> {
> struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> mutex[mutex->id]);
> - clk_disable_unprepare(ddp->clk);
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> + if (IS_ERR(ddp->clk[i]))
> + continue;
> + clk_disable_unprepare(ddp->clk[i]);
> + }
> }
>
> void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
> @@ -415,11 +440,19 @@ static int mtk_ddp_probe(struct platform_device *pdev)
> ddp->data = of_device_get_match_data(dev);
>
> if (!ddp->data->no_clk) {
> - ddp->clk = devm_clk_get(dev, NULL);
> - if (IS_ERR(ddp->clk)) {
> - if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get clock\n");
> - return PTR_ERR(ddp->clk);
> + int ret;
> +
> + for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> + ddp->clk[i] = of_clk_get(dev->of_node, i);
> +
> + if (IS_ERR(ddp->clk[i])) {
> + ret = PTR_ERR(ddp->clk[i]);
> + if (ret != EPROBE_DEFER)
> + dev_err(dev, "Failed to get clock %d\n",
> + ret);
> +
> + return ret;
> + }
Use of_clk_bulk_get_all instead?
ddp->num_clks = of_clk_bulk_get_all(dev->of_node, &ddp->clks);
...
Then the calls above can be clk_bulk_enable/clk_bulk_disable using
num_clks and clks.
> }
> }
>
> --
> 1.8.1.1.dirty
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek