Re: [PATCH 3/3] perf tools: Add evlist/evlist-verbose control commands
From: Arnaldo Carvalho de Melo
Date: Tue Dec 15 2020 - 11:10:28 EST
Em Tue, Dec 15, 2020 at 04:59:11PM +0100, Jiri Olsa escreveu:
> On Tue, Dec 15, 2020 at 12:23:43PM -0300, Arnaldo Carvalho de Melo wrote:
> > Em Thu, Dec 10, 2020 at 09:43:30PM +0100, Jiri Olsa escreveu:
> > > Adding new control events to display all evlist events.
> > >
> > > The interface string for control file is 'evlist' and
> > > 'evlist-verbose'.
> >
> > Can't we pass args to such commands?
> >
> > Then its just one event, i.e. "evlist", and -v can be passed to it.
>
> it's possible but it adds another processing to the single record thread
> where we want to be fast
> but I agree it could be helpful to get the other output that evsel__fprintf
> can print, and we already call evsel__fprintf, so it's just a matter of
> setting 'struct perf_attr_details' properly
> I need to check, but perhaps we could use ' ' instead of '-' and have:
>
> echo 'evlist -v' > control
> echo 'evlist -g' > control
> echo 'evlist -F' > control
> and have:
> echo 'enable cycles' > control
> instead of:
> echo 'enable-cycles' > control
> I'd like to avoid any elaborate parsing logic..
> how about that?
Use space to separate command from its arguments, keep the same
experience as:
[acme@quaco ~]$ perf evlist -h
Usage: perf evlist [<options>]
-f, --force don't complain, do it
-F, --freq Show the sample frequency
-g, --group Show event group information
-i, --input <file> Input file name
-v, --verbose Show all event attr details
--trace-fields Show tracepoint fields
[acme@quaco ~]$
and:
echo "evlist arguments"
?
Fits the bill :-)
The experience users have on existing commands, the same arguments, etc.
Even -h can have its uses, i.e. has this daemon support for some option
or is it an old version?
- Arnaldo
> >
> > i.e.:
> >
> > The commands would be:
> >
> > evlist
> >
> > That produces:
> >
> >
> > terminal 2:
> > # echo evlist > control
> >
> > terminal 1:
> > # perf record --control=fifo:control,ack -e 'sched:*'
> > ...
> > sched:sched_kthread_stop
> > sched:sched_kthread_stop_ret
> > sched:sched_waking
> >
> > And 'evlist -v', that produces:
> >
> > terminal 2:
> > # echo "evlist -v" > control
> >
> > terminal 1:
> > ...
> > sched:sched_kthread_stop: type: 2, size: 120, config: 0x145, \
> > { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU \
> > |PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: \
> > 1, sample_id_all: 1, exclude_guest: 1
> > sched:sched_kthread_stop_ret: type: 2, size: 120, config: 0x144 \
> > , { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU \
> > |PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, \
> > sample_id_all: 1, exclude_guest: 1
> > ...
> >
> > I think we could even change things such that we pass a file descriptor
> > for cmd_evlist to use, passing the argv received from the control file,
> > etc.
>
> hum, so perf evlist opens/reads perf.data, which we do not have ready
> at that point in perf record
>
> >
> > With this in place we could reuse more stuff and allow using this
> > control file to obtain information such as 'perf report --header-only',
> > etc.
> >
> > echo "report --header-only" > control would get us the same thing as
> > 'perf report --header-only' for an existing perf.data file:
>
> all those header data are written when record is exiting or dumped
> for switch output, so we don't have that data at that moment control
> command is received
>
> >
> >
> > # perf report --header-only
> > # ========
> > # captured on : Tue Dec 15 12:21:23 2020
> > # header version : 1
> > # data offset : 432
> > # data size : 1648
> > # feat offset : 2080
> > # hostname : five
> > # os release : 5.10.0-rc7+
> > # perf version : 5.10.rc6.gc56d2601b5d0
> > # arch : x86_64
> > # nrcpus online : 24
> > # nrcpus avail : 24
> > # cpudesc : AMD Ryzen 9 3900X 12-Core Processor
> > # cpuid : AuthenticAMD,23,113,0
> > # total memory : 32884432 kB
> > # cmdline : /home/acme/bin/perf record ls
> > # event : name = cycles:u, , id = { 85540, 85541, 85542, 85543, 85544, 85545, 85546, 85547, 85548, 85549, 85550, 85551, 85552, 85553, 85554, 85555, 85556, 85557, 85558, 85559, 85560, 85561, 85562, 85563 }, size = 120, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, exclude_kernel = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
> > # CPU_TOPOLOGY info available, use -I to display
> > # NUMA_TOPOLOGY info available, use -I to display
> > # pmu mappings: amd_df = 8, software = 1, ibs_op = 11, power = 14, ibs_fetch = 10, uprobe = 7, cpu = 4, amd_iommu_0 = 12, breakpoint = 5, amd_l3 = 9, tracepoint = 2, kprobe = 6, msr = 13
> > # CACHE info available, use -I to display
> > # time of first sample : 12184.494971
> > # time of last sample : 12184.495496
> > # sample duration : 0.525 ms
> > # MEM_TOPOLOGY info available, use -I to display
> > # cpu pmu capabilities: max_precise=0
> > # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CLOCK_DATA
> > # ========
> > #
> >
> > I.e. users would discover that using this control file is as easy as
> > working with perf.data files or with the pipe mode, all the three ways
> > of interacting with perf would use the same command interface arguments.
>
> yep, I agree we can mimic the similar arguments, but I doubt we
> can easily reuse the same code for that
>
> jirka
>
--
- Arnaldo