Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5
From: Alexandre Belloni
Date: Wed Dec 16 2020 - 08:46:18 EST
On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
> Add support for SAMA7G5 by adding proper struct reg_config structure
> and since SAMA7G5 is not currently on LPDDR setups the commit also
> avoid the mapping of DDR controller.
>
Honestly, I wouldn't leave the LPDDR part out because there is no
guarantee anyone will think about it when they have a design with LPDDR
and as a consequence, their device will behave properly but will be
very short lived.
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
> drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
> 1 file changed, 54 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 3996167f676f..a3342c8c3728 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -78,9 +78,15 @@ struct pmc_reg_config {
> u8 mckr;
> };
>
> +struct ddrc_reg_config {
> + u32 type_offset;
> + u32 type_mask;
> +};
> +
> struct reg_config {
> struct shdwc_reg_config shdwc;
> struct pmc_reg_config pmc;
> + struct ddrc_reg_config ddrc;
> };
>
> struct shdwc {
> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
> .pmc = {
> .mckr = 0x30,
> },
> + .ddrc = {
> + .type_offset = AT91_DDRSDRC_MDR,
> + .type_mask = AT91_DDRSDRC_MD
> + },
> };
>
> static const struct reg_config sam9x60_reg_config = {
> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
> .pmc = {
> .mckr = 0x28,
> },
> + .ddrc = {
> + .type_offset = AT91_DDRSDRC_MDR,
> + .type_mask = AT91_DDRSDRC_MD
> + },
> +};
> +
> +static const struct reg_config sama7g5_reg_config = {
> + .shdwc = {
> + .wkup_pin_input = 0,
> + .mr_rtcwk_shift = 17,
> + .mr_rttwk_shift = 16,
> + .sr_rtcwk_shift = 5,
> + .sr_rttwk_shift = 4,
> + },
> + .pmc = {
> + .mckr = 0x28,
> + },
> };
>
> static const struct of_device_id at91_shdwc_of_match[] = {
> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
> {
> .compatible = "microchip,sam9x60-shdwc",
> .data = &sam9x60_reg_config,
> + },
> + {
> + .compatible = "microchip,sama7g5-shdwc",
> + .data = &sama7g5_reg_config,
> }, {
> /*sentinel*/
> }
> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
> static const struct of_device_id at91_pmc_ids[] = {
> { .compatible = "atmel,sama5d2-pmc" },
> { .compatible = "microchip,sam9x60-pmc" },
> + { .compatible = "microchip,sama7g5-pmc" },
> { /* Sentinel. */ }
> };
>
> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
> goto clk_disable;
> }
>
> - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
> - if (!np) {
> - ret = -ENODEV;
> - goto unmap;
> - }
> + if (at91_shdwc->rcfg->ddrc.type_mask) {
> + np = of_find_compatible_node(NULL, NULL,
> + "atmel,sama5d3-ddramc");
> + if (!np) {
> + ret = -ENODEV;
> + goto unmap;
> + }
>
> - at91_shdwc->mpddrc_base = of_iomap(np, 0);
> - of_node_put(np);
> + at91_shdwc->mpddrc_base = of_iomap(np, 0);
> + of_node_put(np);
>
> - if (!at91_shdwc->mpddrc_base) {
> - ret = -ENOMEM;
> - goto unmap;
> + if (!at91_shdwc->mpddrc_base) {
> + ret = -ENOMEM;
> + goto unmap;
> + }
> +
> + ddr_type = readl(at91_shdwc->mpddrc_base +
> + at91_shdwc->rcfg->ddrc.type_offset) &
> + at91_shdwc->rcfg->ddrc.type_mask;
> + if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> + ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> + iounmap(at91_shdwc->mpddrc_base);
> + at91_shdwc->mpddrc_base = NULL;
> + }
> }
>
> pm_power_off = at91_poweroff;
>
> - ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
> - AT91_DDRSDRC_MD;
> - if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> - ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> - iounmap(at91_shdwc->mpddrc_base);
> - at91_shdwc->mpddrc_base = NULL;
> - }
> -
> return 0;
>
> unmap:
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com