Re: [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas

[Rob Herring]

On Wed, Dec 16, 2020 at 05:19:55PM +0200, Laurent Pinchart wrote:
> Hi Rob,
> 
> Thank you for the patch.
> 
> On Thu, Dec 10, 2020 at 03:16:25PM -0600, Rob Herring wrote:
> > Now that we have graph and video-interfaces schemas, rework the media
> > related schemas to use them.
> > 
> > Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> > Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> > Cc: Jacopo Mondi <jacopo@xxxxxxxxxx>
> > Cc: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > Cc: linux-media@xxxxxxxxxxxxxxx
> > Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> > ---


> > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > index d94bd67ccea1..3657f2f41098 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > @@ -73,19 +73,16 @@ properties:
> >      enum: [ 0, 180 ]
> > 
> >    port:
> > -    type: object
> > +    $ref: /schemas/graph.yaml#/$defs/port-base
> > +    additionalProperties: false
> > +
> >      properties:
> >        endpoint:
> > -        type: object
> > +        $ref: /schemas/media/video-interfaces.yaml#
> > +        unevaluatedProperties: false
> > +
> >          properties:
> > -          link-frequencies:
> > -            $ref: /schemas/types.yaml#/definitions/uint64-array
> > -            description: List of allowed data link frequencies.
> > -          data-lanes:
> > -            minItems: 1
> > -            maxItems: 8
> 
> Don't we need
> 
>           link-frequencies: true
>           data-lanes: true
> 
> to convey the fact that those properties are applicable for this device
> ? This applies to a few locations below too.

Adding them would convey that to the reader, but wouldn't change the 
schema validation. We'd have to use 'additionalProperties' instead and 
also add 'remote-endpoint' everywhere (and 'reg' sometimes). I prefer 
not doing all that, but if we want it just for purposes of documenting 
the usage, that's fine.

> >            bus-type:
> > -            description: The type of the data bus.
> >              oneOf:
> >                - const: 1 # CSI-2 C-PHY
> >                - const: 3 # CCP2
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > index 280c62afae13..3b1ea9da437a 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > @@ -31,27 +31,15 @@ properties:
> >      maxItems: 1
> > 
> >    port:
> > -    type: object
> > -    description: |-
> > -      Should contain one endpoint sub-node used to model connection to the
> > -      video receiver according to the specification defined in
> > -      Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +    $ref: /schemas/graph.yaml#/$defs/port-base
> > 
> >      properties:
> >        endpoint:
> > -        type: object
> > +        $ref: /schemas/media/video-interfaces.yaml#
> > +        unevaluatedProperties: false
> > 
> >          properties:
> > -          remote-endpoint:
> > -            description: |-
> > -              phandle to the video receiver input port.
> > -
> > -          clock-noncontinuous:
> > -            type: boolean
> > -            description: |-
> > -              Set to true to allow MIPI CSI-2 non-continuous clock operations.
> > -
> > -        additionalProperties: false
> > +          clock-noncontinuous: true
> > 
> >      additionalProperties: false
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > index cde85553fd01..c29b057ae922 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > @@ -57,16 +57,13 @@ properties:
> >        active low.
> > 
> >    port:
> > -    type: object
> > +    $ref: /schemas/graph.yaml#/$defs/port-base
> >      additionalProperties: false
> > -    description:
> > -      A node containing an output port node with an endpoint definition
> > -      as documented in
> > -      Documentation/devicetree/bindings/media/video-interfaces.txt
> > 
> >      properties:
> >        endpoint:
> > -        type: object
> > +        $ref: /schemas/media/video-interfaces.yaml#
> > +        unevaluatedProperties: false
> > 
> >          properties:
> >            data-lanes:
> > @@ -79,18 +76,13 @@ properties:
> >                - const: 4
> > 
> >            link-frequencies:
> > -            $ref: /schemas/types.yaml#/definitions/uint64-array
> > -            description:
> > -              Allowed data bus frequencies. 360000000, 180000000 Hz or both
> > -              are supported by the driver.
> > -
> > +            maxItems: 2
> > +            items:
> > +              enum: [ 360000000, 180000000 ]
> 
> This is a limitation of the driver, not the device. Should we keep this
> information in a comment, to eventually get it fixed and drop the
> limitation from the bindings ?

If your dts has anything else, then it won't work. Warning on that seems 
valuable to me, so I think we should keep it. If someone with a better 
driver complains, we can drop it.

I can keep the description with 'Frequencies listed are driver, not h/w 
limitations'.

Rob