[RFC PATCH v2 1/8] dt-bindings: net: sparx5: Add sparx5-switch bindings
From: Steen Hegelund
Date: Thu Dec 17 2020 - 02:53:20 EST
Document the Sparx5 switch device driver bindings
Signed-off-by: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
Signed-off-by: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
---
.../bindings/net/microchip,sparx5-switch.yaml | 178 ++++++++++++++++++
1 file changed, 178 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
new file mode 100644
index 000000000000..6e3ef8285e9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Ethernet switch controller
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
+ - Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
+
+description: |
+ The SparX-5 Enterprise Ethernet switch family provides a rich set of
+ Enterprise switching features such as advanced TCAM-based VLAN and
+ QoS processing enabling delivery of differentiated services, and
+ security through TCAM-based frame processing using versatile content
+ aware processor (VCAP).
+
+ IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
+ with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
+ IPv6 (S,G) multicast groups.
+
+ L3 security features include source guard and reverse path
+ forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
+ IP tunnels (IP over GRE/IP).
+
+ The SparX-5 switch family targets managed Layer 2 and Layer 3
+ equipment in SMB, SME, and Enterprise where high port count
+ 1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
+
+properties:
+ $nodename:
+ pattern: "^switch@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,sparx5-switch
+
+ reg:
+ minItems: 2
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: devices
+ - const: gcb
+
+ interrupts:
+ maxItems: 1
+ description: Interrupt used for reception of packets to the CPU
+
+ ethernet-ports:
+ type: object
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^port@[0-9]+$":
+ type: object
+ description: Switch ports
+
+ allOf:
+ - $ref: ethernet-controller.yaml#
+
+ properties:
+ reg:
+ description: Switch port number
+
+ max-speed:
+ maxItems: 1
+ description: Bandwidth allocated to this port
+
+ phys:
+ description: phandle of a Ethernet Serdes PHY
+
+ phy-handle:
+ description: phandle of a Ethernet PHY
+
+ phy-mode:
+ description: Interface between the serdes and the phy
+
+ sfp:
+ description: phandle of an SFP
+
+ managed:
+ maxItems: 1
+ description: SFP management
+
+ required:
+ - reg
+ - max-speed
+ - phys
+
+ oneOf:
+ - required:
+ - phy-handle
+ - phy-mode
+ - required:
+ - sfp
+ - managed
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - ethernet-ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ switch: switch@600000000 {
+ compatible = "microchip,sparx5-switch";
+ reg = <0x10000000 0x800000>,
+ <0x11010000 0x1b00000>;
+ reg-names = "devices", "gcb";
+
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port0: port@0 {
+ reg = <0>;
+ max-speed = <1000>;
+ phys = <&serdes 13>;
+ phy-handle = <&phy0>;
+ phy-mode = "qsgmii";
+ };
+ /* ... */
+ /* Then the 25G interfaces */
+ port60: port@60 {
+ reg = <60>;
+ max-speed = <25000>;
+ phys = <&serdes 29>;
+ sfp = <&sfp_eth60>;
+ managed = "in-band-status";
+ };
+ port61: port@61 {
+ reg = <61>;
+ max-speed = <25000>;
+ phys = <&serdes 30>;
+ sfp = <&sfp_eth61>;
+ managed = "in-band-status";
+ };
+ port62: port@62 {
+ reg = <62>;
+ max-speed = <25000>;
+ phys = <&serdes 31>;
+ sfp = <&sfp_eth62>;
+ managed = "in-band-status";
+ };
+ port63: port@63 {
+ reg = <63>;
+ max-speed = <25000>;
+ phys = <&serdes 32>;
+ sfp = <&sfp_eth63>;
+ managed = "in-band-status";
+ };
+ /* Finally the Management interface */
+ port64: port@64 {
+ reg = <64>;
+ max-speed = <1000>;
+ phys = <&serdes 0>;
+ phy-handle = <&phy64>;
+ phy-mode = "sgmii";
+ };
+ };
+ };
+
+...
--
2.29.2