[PATCH v1] arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node

[Robert Foss]

Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
this issue prevented the ov8856 from probing properly as it does not respond
to I2C messages.

Fixes: d4919a44564b ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
camera nodes")

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7cc236575ee2..a943b3f353ce 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1112,11 +1112,11 @@ camera@10 {
 		reg = <0x10>;
 
 		// CAM0_RST_N
-		reset-gpios = <&tlmm 9 0>;
+		reset-gpios = <&tlmm 9 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_default>;
 		gpios = <&tlmm 13 0>,
-			<&tlmm 9 0>;
+			<&tlmm 9 1>;
 
 		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
 		clock-names = "xvclk";
-- 
2.27.0