[PATCH v2 2/2] ARM: dts: sun8i-v3s: Add PWM controller and pins definitions
From: Paul Kocialkowski
Date: Fri Dec 18 2020 - 15:56:11 EST
This introduces definitions for the PWM controller found in the V3s,
as well as associated pins. This fashion of the controller has two PWM
outputs and is register-compatible with the A20.
Both PWM outputs were tested on a Lichee Pi Zero with a simple
transistor-LED setup.
Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
---
arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index bff822b9fa01..f02aa988156d 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -404,6 +404,16 @@ spi0_pins: spi0-pins {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
+
+ pwm0_pin: pwm0-pin {
+ pins = "PB4";
+ function = "pwm0";
+ };
+
+ pwm1_pin: pwm1-pin {
+ pins = "PB5";
+ function = "pwm1";
+ };
};
timer@1c20c00 {
@@ -422,6 +432,15 @@ wdt0: watchdog@1c20ca0 {
clocks = <&osc24M>;
};
+ pwm: pwm@1c21400 {
+ compatible = "allwinner,sun8i-v3s-pwm",
+ "allwinner,sun7i-a20-pwm";
+ reg = <0x01c21400 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x400>;
--
2.29.2