Re: [PATCH v6 1/5] counter: Internalize sysfs interface code
From: William Breathitt Gray
Date: Mon Dec 21 2020 - 00:26:20 EST
On Sun, Dec 13, 2020 at 05:15:00PM -0600, David Lechner wrote:
> On 11/22/20 2:29 PM, William Breathitt Gray wrote:
>
> > 14 files changed, 1806 insertions(+), 2546 deletions(-)
>
> It would be really nice if we could break this down into smaller
> pieces and start getting it merged. It is really tough to keep
> reviewing this much code in one patch over and over again.
Yes, this is a pretty massive patch. I could break this across the
individual files affected to make it simpler to review, but in the end
all those patches would need to end up squashed together before merge
again (for the sake of git bisect), so the effort feels somewhat moot.
Luckily, I don't think there will be much change in the next revision
since it's looking like it'll mainly be a few bug fixes; hopefully this
coming version 7 will be the final revision before merge.
> Here are some initial findings from testing:
>
>
> > +static void counter_device_release(struct device *dev)
> > +{
> > + struct counter_device *const counter = dev_get_drvdata(dev);
> > +
> > + counter_chrdev_remove(counter);
> > + ida_simple_remove(&counter_ida, counter->id);
> > +}
>
>
> I got the following error after `modprobe -r ti-eqep`:
>
> [ 1186.045766] ------------[ cut here ]------------
> [ 1186.050647] WARNING: CPU: 0 PID: 2625 at lib/refcount.c:28 counter_device_release+0x10/0x24 [counter]
> [ 1186.059976] refcount_t: underflow; use-after-free.
> [ 1186.064790] Modules linked in: aes_arm_bs(+) crypto_simd cryptd ccm usb_f_mass_storage usb_f_acm u_serial usb_f_ecm rfcomm usb_f_rndis u_ether libcomposite aes_arm aes_generic cmac bnep wl18xx wlcore mac80211 libarc4 sha256_generic libsha256 sha256_arm cfg80211 ti_am335x_adc kfifo_buf omap_aes_driver omap_crypto omap_sham crypto_engine pm33xx ti_emif_sram hci_uart omap_rng btbcm rng_core ti_eqep(-) counter bluetooth c_can_platform c_can ecdh_generic bmp280_spi ecc can_dev libaes bmp280_i2c bmp280 industrialio omap_mailbox musb_dsps wlcore_sdio musb_hdrc udc_core usbcore wkup_m3_ipc at24 omap_wdt phy_am335x watchdog phy_am335x_control ti_am335x_tscadc phy_generic wkup_m3_rproc usb_common cppi41 rtc_omap leds_gpio led_class cpufreq_dt pwm_tiehrpwm autofs4
> [ 1186.132376] CPU: 0 PID: 2625 Comm: modprobe Not tainted 5.10.0-rc7bone-counter+ #23
> [ 1186.140070] Hardware name: Generic AM33XX (Flattened Device Tree)
> [ 1186.146225] [<c0110d70>] (unwind_backtrace) from [<c010b640>] (show_stack+0x10/0x14)
> [ 1186.154017] [<c010b640>] (show_stack) from [<c09a0c98>] (dump_stack+0xc4/0xe4)
> [ 1186.161285] [<c09a0c98>] (dump_stack) from [<c0137ba0>] (__warn+0xd8/0x100)
> [ 1186.168284] [<c0137ba0>] (__warn) from [<c099c8e4>] (warn_slowpath_fmt+0x94/0xbc)
> [ 1186.175814] [<c099c8e4>] (warn_slowpath_fmt) from [<bf10b0e8>] (counter_device_release+0x10/0x24 [counter])
> [ 1186.185632] [<bf10b0e8>] (counter_device_release [counter]) from [<c0667118>] (device_release+0x30/0xa4)
> [ 1186.195163] [<c0667118>] (device_release) from [<c057f73c>] (kobject_put+0x94/0x104)
> [ 1186.202944] [<c057f73c>] (kobject_put) from [<c057f73c>] (kobject_put+0x94/0x104)
> [ 1186.210472] [<c057f73c>] (kobject_put) from [<bf19004c>] (ti_eqep_remove+0x10/0x30 [ti_eqep])
> [ 1186.219047] [<bf19004c>] (ti_eqep_remove [ti_eqep]) from [<c066f390>] (platform_drv_remove+0x24/0x3c)
> [ 1186.228313] [<c066f390>] (platform_drv_remove) from [<c066d934>] (device_release_driver_internal+0xfc/0x1d0)
> [ 1186.238187] [<c066d934>] (device_release_driver_internal) from [<c066da78>] (driver_detach+0x58/0xa8)
> [ 1186.247456] [<c066da78>] (driver_detach) from [<c066c5ec>] (bus_remove_driver+0x4c/0xa0)
> [ 1186.255594] [<c066c5ec>] (bus_remove_driver) from [<c01dd150>] (sys_delete_module+0x180/0x264)
> [ 1186.264250] [<c01dd150>] (sys_delete_module) from [<c0100080>] (ret_fast_syscall+0x0/0x54)
> [ 1186.272551] Exception stack(0xd247ffa8 to 0xd247fff0)
> [ 1186.277629] ffa0: 004fb478 004fb478 004fb4b4 00000800 b3bfcf00 00000000
> [ 1186.285847] ffc0: 004fb478 004fb478 004fb478 00000081 00000000 be974900 be974a55 004fb478
> [ 1186.294062] ffe0: 004f8f5c be97352c 004ddd97 b6d11d68
> [ 1186.299253] ---[ end trace e1c61dea091f1078 ]---
I noticed that I'm calling counter_chrdev_remove() twice: once in
counter_unregister(), and again in counter_device_release(). I suspect
this is what's causing the refcount to underflow. I'll test and verify
that this is the culprit.
In fact, I don't think I need to define a counter_device_release()
callback at all, would I? These cleanup function calls could be moved to
counter_unregister() instead.
> > +static ssize_t counter_comp_u8_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t len)
> > +{
> > + const struct counter_attribute *const a = to_counter_attribute(attr);
> > + struct counter_device *const counter = dev_get_drvdata(dev);
> > + struct counter_count *const count = a->parent;
> > + struct counter_synapse *const synapse = a->comp.priv;
> > + const struct counter_available *const avail = a->comp.priv;
> > + int err;
> > + bool bool_data;
> > + int idx;
> > + u8 data;
> > +
> > + switch (a->comp.type) {
> > + case COUNTER_COMP_BOOL:
> > + err = kstrtobool(buf, &bool_data);
> > + data = bool_data;
> > + break;
> > + case COUNTER_COMP_FUNCTION:
> > + err = find_in_string_array(&data, count->functions_list,
> > + count->num_functions, buf,
> > + counter_function_str);
> > + break;
> > + case COUNTER_COMP_SYNAPSE_ACTION:
> > + err = find_in_string_array(&data, synapse->actions_list,
> > + synapse->num_actions, buf,
> > + counter_synapse_action_str);
> > + break;
> > + case COUNTER_COMP_ENUM:
> > + idx = __sysfs_match_string(avail->strs, avail->num_items, buf);
> > + if (idx < 0)
> > + return idx;
> > + data = idx;
> > + break;
> > + case COUNTER_COMP_COUNT_MODE:
> > + err = find_in_string_array(&data, avail->enums,
> > + avail->num_items, buf,
> > + counter_count_mode_str);
> > + break;
> > + default:
> > + err = kstrtou8(buf, 0, &data);
> > + break;
> > + }
> > + if (err)
>
> This needs to be `if (err < 0)`. There are cases where the functions
> above return positive values. (And to be overly safe, it probably wouldn't
> hurt to use err < 0 everywhere - not just in this function.)
Ack.
William Breathitt Gray
Attachment:
signature.asc
Description: PGP signature