Re: [PATCH v2 2/6] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0

[Krzysztof Kozlowski]

On Mon, Dec 21, 2020 at 08:09:47PM +0530, Jagan Teki wrote:
> On Mon, Dec 21, 2020 at 7:35 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> >
> > On Mon, Dec 21, 2020 at 07:29:22PM +0530, Jagan Teki wrote:
> > > On Mon, Dec 21, 2020 at 7:16 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > > >
> > > > On Mon, Dec 21, 2020 at 05:01:47PM +0530, Jagan Teki wrote:
> > > > > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
> > > > >
> > > > > C.TOUCH 2.0 is a general purpose carrier board with capacitive
> > > > > touch interface support.
> > > > >
> > > > > i.Core MX8M Mini needs to mount on top of this Carrier board for
> > > > > creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
> > > > >
> > > > > Add bindings for it.
> > > > >
> > > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > > > ---
> > > > > Changes for v2:
> > > > > - updated commit message
> > > > >
> > > > >  Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
> > > > >  1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > > > > index 67980dcef66d..e653e0a43016 100644
> > > > > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > > > > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > > > > @@ -667,6 +667,8 @@ properties:
> > > > >          items:
> > > > >            - enum:
> > > > >                - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
> > > > > +              - engicam,icore-mx8mm               # i.MX8MM Engicam i.Core MX8M Mini SOM
> > > > > +              - engicam,icore-mx8mm-ctouch2       # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
> > > >
> > > > Please test your DTS against new schema with dtbs_check. This won't
> > > > match.
> > >
> > > Sorry, not sure I understand clearly here.
> > >
> > > This the dts file ie used matched compatible.
> > > compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
> > >                      "fsl,imx8mm";
> > >
> > > I did build the dtbs_check without showing any issues like,
> > >
> > > $ make ARCH=arm64 dtbs_check
> > > ...
> > >
> > >     From schema: /w/dt-schema/dt-schema/dtschema/schemas/property-units.yaml
> > >   DTC     arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dtb
> > >   DTC     arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2-of10.dtb
> > >   DTC     arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dtb
> > > ..
> > >
> > > Can you let me know what I missed here?
> >
> > You pasted here output of validating with property-units.yaml (or
> > something else), not the schema which you changed. If you want to limit
> > the tests, use DT_SCHEMA_FILES.
> >
> > I mentioned about exactly the same problem in yout previous v1
> > at patch #5. No changes here stil.
> 
> Yes, I usually did that check before posting. Please check the build
> log below and fsl.yaml binding is fine to build.
> 
> # make dt_binding_check DT_SCHEMA_FILES=arm/fsl.yaml

1. Wrong path to schema file,
2. Bindings pass, they are not a problem. You were running dtbs_check,
right?

Best regards,
Krzysztof