[PATCH v2 01/14] phy: cadence: Sierra: Fix PHY power_on sequence

[Kishon Vijay Abraham I]

Commit 44d30d622821d ("phy: cadence: Add driver for Sierra PHY")
de-asserts PHY_RESET even before the configurations are loaded in
phy_init(). However PHY_RESET should be de-asserted only after
all the configurations has been initialized, instead of de-asserting
in probe. Fix it here.

Fixes: 44d30d622821d ("phy: cadence: Add driver for Sierra PHY")
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v5.4+
---
 drivers/phy/cadence/phy-cadence-sierra.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 26a0badabe38..19f32ae877b9 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -319,6 +319,12 @@ static int cdns_sierra_phy_on(struct phy *gphy)
 	u32 val;
 	int ret;
 
+	ret = reset_control_deassert(sp->phy_rst);
+	if (ret) {
+		dev_err(dev, "Failed to take the PHY out of reset\n");
+		return ret;
+	}
+
 	/* Take the PHY lane group out of reset */
 	ret = reset_control_deassert(ins->lnk_rst);
 	if (ret) {
@@ -616,7 +622,6 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	reset_control_deassert(sp->phy_rst);
 	return PTR_ERR_OR_ZERO(phy_provider);
 
 put_child:
-- 
2.17.1