Re: [PATCH v2 2/3] hwmon: add Texas Instruments TPS23861 driver

From: Robert Marko
Date: Tue Dec 22 2020 - 09:32:56 EST

On Mon, Dec 21, 2020 at 5:26 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On 12/19/20 11:11 AM, Robert Marko wrote:
> > Add basic monitoring support as well as port on/off control for Texas
> > Instruments TPS23861 PoE PSE IC.
> >
> > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> > Cc: Luka Perkov <luka.perkov@xxxxxxxxxx>
> > ---
> > Changes in v2:
> > * Convert to devm_hwmon_device_register_with_info()
> > * Change license
> >
> > drivers/hwmon/Kconfig | 11 +
> > drivers/hwmon/Makefile | 1 +
> > drivers/hwmon/tps23861.c | 538 +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 550 insertions(+)
> > create mode 100644 drivers/hwmon/tps23861.c
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index a850e4f0e0bd..3368ecfa7a9c 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1102,6 +1102,17 @@ config SENSORS_TC654
> > This driver can also be built as a module. If so, the module
> > will be called tc654.
> >
> > +config SENSORS_TPS23861
> > + tristate "Texas Instruments TPS23861 PoE PSE"
> > + depends on I2C
> > + select REGMAP_I2C
> > + help
> > + If you say yes here you get support for Texas Instruments
> > + TPS23861 802.3at PoE PSE chips.
> > +
> > + This driver can also be built as a module. If so, the module
> > + will be called tps23861.
> > +
> > config SENSORS_MENF21BMC_HWMON
> > tristate "MEN 14F021P00 BMC Hardware Monitoring"
> > depends on MFD_MENF21BMC
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index 9db2903b61e5..7493e9d5dc43 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_MAX31790) += max31790.o
> > obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
> > obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
> > obj-$(CONFIG_SENSORS_TC654) += tc654.o
> > +obj-$(CONFIG_SENSORS_TPS23861) += tps23861.o
> > obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
> > obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
> > obj-$(CONFIG_SENSORS_MR75203) += mr75203.o
> > diff --git a/drivers/hwmon/tps23861.c b/drivers/hwmon/tps23861.c
> > new file mode 100644
> > index 000000000000..2bb804ccdc8e
> > --- /dev/null
> > +++ b/drivers/hwmon/tps23861.c
> > @@ -0,0 +1,538 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2020 Sartura Ltd.
> > + *
> > + * Driver for the TI TPS23861 PoE PSE.
> > + *
> > + * Author: Robert Marko <robert.marko@xxxxxxxxxx>
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/delay.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#define TEMPERATURE 0x2c
> > +#define INPUT_VOLTAGE_LSB 0x2e
> > +#define INPUT_VOLTAGE_MSB 0x2f
> > +#define PORT_1_CURRENT_LSB 0x30
> > +#define PORT_1_CURRENT_MSB 0x31
> > +#define PORT_1_VOLTAGE_LSB 0x32
> > +#define PORT_1_VOLTAGE_MSB 0x33
> > +#define PORT_2_CURRENT_LSB 0x34
> > +#define PORT_2_CURRENT_MSB 0x35
> > +#define PORT_2_VOLTAGE_LSB 0x36
> > +#define PORT_2_VOLTAGE_MSB 0x37
> > +#define PORT_3_CURRENT_LSB 0x38
> > +#define PORT_3_CURRENT_MSB 0x39
> > +#define PORT_3_VOLTAGE_LSB 0x3a
> > +#define PORT_3_VOLTAGE_MSB 0x3b
> > +#define PORT_4_CURRENT_LSB 0x3c
> > +#define PORT_4_CURRENT_MSB 0x3d
> > +#define PORT_4_VOLTAGE_LSB 0x3e
> > +#define PORT_4_VOLTAGE_MSB 0x3f
> > +#define PORT_N_CURRENT_LSB_OFFSET 0x04
> > +#define PORT_N_VOLTAGE_LSB_OFFSET 0x04
> > +#define VOLTAGE_CURRENT_MASK GENMASK(13, 0)
> > +#define PORT_1_STATUS 0x0c
> > +#define PORT_2_STATUS 0x0d
> > +#define PORT_3_STATUS 0x0e
> > +#define PORT_4_STATUS 0x0f
> > +#define PORT_STATUS_CLASS_MASK GENMASK(7, 4)
> > +#define PORT_STATUS_DETECT_MASK GENMASK(3, 0)
> > +#define PORT_CLASS_UNKNOWN 0
> > +#define PORT_CLASS_1 1
> > +#define PORT_CLASS_2 2
> > +#define PORT_CLASS_3 3
> > +#define PORT_CLASS_4 4
> > +#define PORT_CLASS_RESERVED 5
> > +#define PORT_CLASS_0 6
> > +#define PORT_CLASS_OVERCURRENT 7
> > +#define PORT_CLASS_MISMATCH 8
> > +#define PORT_DETECT_UNKNOWN 0
> > +#define PORT_DETECT_SHORT 1
> > +#define PORT_DETECT_RESERVED 2
> > +#define PORT_DETECT_RESISTANCE_LOW 3
> > +#define PORT_DETECT_RESISTANCE_OK 4
> > +#define PORT_DETECT_RESISTANCE_HIGH 5
> > +#define PORT_DETECT_OPEN_CIRCUIT 6
> > +#define PORT_DETECT_RESERVED_2 7
> > +#define PORT_DETECT_MOSFET_FAULT 8
> > +#define PORT_DETECT_LEGACY 9
> > +/* Measurment beyond clamp voltage */
> > +#define PORT_DETECT_CAPACITANCE_INVALID_BEYOND 10
> > +/* Insufficient voltage delta */
> > +#define PORT_DETECT_CAPACITANCE_INVALID_DELTA 11
> > +#define PORT_DETECT_CAPACITANCE_OUT_OF_RANGE 12
> > +#define POE_PLUS 0x40
> > +
> > +#define DETECT_CLASS_RESTART 0x18
> > +#define POWER_ENABLE 0x19
> > +
> > +#define TEMPERATURE_LSB 652 /* 0.652 degrees Celsius */
> > +#define VOLTAGE_LSB 3662 /* 3.662 mV */
> > +#define SHUNT_RESISTOR_DEFAULT 255000 /* 255 mOhm */
> > +#define CURRENT_LSB_255 62260 /* 62.260 uA */
> > +#define CURRENT_LSB_250 61039 /* 61.039 uA */
> > +
> > +struct tps23861_data {
> > + struct regmap *regmap;
> > + u32 shunt_resistor;
> > +};
> > +
> > +static struct regmap_config tps23861_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int tps23861_read_temp(struct tps23861_data *data, long *val)
> > +{
> > + unsigned int regval;
> > + int err;
> > +
> > + err = regmap_read(data->regmap, TEMPERATURE, &regval);
> > + if (err < 0)
> > + return err;
> > +
> > + *val = (regval * TEMPERATURE_LSB) - 20000;
> > +
> > + return 0;
> > +}
> > +
> > +static int tps23861_read_voltage(struct tps23861_data *data, int channel,
> > + long *val)
> > +{
> > + unsigned int regval;
> > + int err;
> > +
> > + if (channel < 4) {
> > + err = regmap_bulk_read(data->regmap,
> > + PORT_1_VOLTAGE_LSB + channel * PORT_N_VOLTAGE_LSB_OFFSET,
> > + &regval, 2);
> > + } else {
> > + err = regmap_bulk_read(data->regmap,
> > + INPUT_VOLTAGE_LSB,
> > + &regval, 2);
> > + }
> > + if (err < 0)
> > + return err;
> > +
> > + *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * VOLTAGE_LSB) / 1000;
> > +
> > + return 0;
> > +}
> > +
> > +static int tps23861_read_current(struct tps23861_data *data, int channel,
> > + long *val)
> > +{
> > + unsigned int current_lsb;
> > + unsigned int regval;
> > + int err;
> > +
> > + if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
> > + current_lsb = CURRENT_LSB_255;
> > + else
> > + current_lsb = CURRENT_LSB_250;
> > +
> > + err = regmap_bulk_read(data->regmap,
> > + PORT_1_CURRENT_LSB + channel * PORT_N_CURRENT_LSB_OFFSET,
> > + &regval, 2);
> > + if (err < 0)
> > + return err;
> > +
> > + *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * current_lsb) / 1000000;
> > +
> > + return 0;
> > +}
> > +
> > +static int tps23861_calculate_power(struct tps23861_data *data, int channel,
> > + long *val)
> > +{
> > + long voltage, current_ma;
> > + int err;
> > +
> > + err = tps23861_read_voltage(data, channel, &voltage);
> > + if (err < 0)
> > + return err;
> > +
> > + err = tps23861_read_current(data, channel, &current_ma);
> > + if (err < 0)
> > + return err;
> > +
>
> It is not the responsibility of the kernel to calculate power values.
> This can and should be done in userspace. Kenrel power attributes are
> only appropriate if reported by the hardware.

Ok, dropped it.
>
> > + *val = voltage * current_ma;
> > +
> > + return 0;
> > +}
> > +
> > +static umode_t tps23861_is_visible(const void *data, enum hwmon_sensor_types type,
> > + u32 attr, int channel)
> > +{
> > + switch (type) {
> > + case hwmon_temp:
> > + switch (attr) {
> > + case hwmon_temp_input:
> > + return 0444;
>
> default: missing. Same below.

Added in v3.
>
> > + }
> > + break;
> > + case hwmon_in:
> > + switch (attr) {
> > + case hwmon_in_input:
> > + case hwmon_in_label:
> > + return 0444;
> > + }
> > + break;
> > + case hwmon_curr:
> > + switch (attr) {
> > + case hwmon_curr_input:
> > + case hwmon_curr_label:
> > + return 0444;
> > + }
> > + break;
> > + case hwmon_power:
> > + switch (attr) {
> > + case hwmon_power_input:
> > + case hwmon_power_label:
> > + return 0444;
> > + }
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int tps23861_read(struct device *dev, enum hwmon_sensor_types type,
> > + u32 attr, int channel, long *val)
> > +{
> > + struct tps23861_data *data = dev_get_drvdata(dev);
> > + int err;
> > +
> > + switch (type) {
> > + case hwmon_temp:
> > + switch (attr) {
> > + case hwmon_temp_input:
> > + err = tps23861_read_temp(data, val);
> > + break;
> > + default:
> > + return -EINVAL;
>
> return -EOPNOTSUPP;
>
> same below.

Changed in v3.
>
> > + }
> > + break;
> > + case hwmon_in:
> > + switch (attr) {
> > + case hwmon_in_input:
> > + err = tps23861_read_voltage(data, channel, val);
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + break;
> > + case hwmon_curr:
> > + switch (attr) {
> > + case hwmon_curr_input:
> > + err = tps23861_read_current(data, channel, val);
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + break;
> > + case hwmon_power:
> > + switch (attr) {
> > + case hwmon_power_input:
> > + err = tps23861_calculate_power(data, channel, val);
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static const char * const tps23861_port_label[] = {
> > + "Port1",
> > + "Port2",
> > + "Port3",
> > + "Port4",
> > + "Input",
> > +};
> > +
> > +static int tps23861_read_string(struct device *dev,
> > + enum hwmon_sensor_types type,
> > + u32 attr, int channel, const char **str)
> > +{
> > + switch (type) {
> > + case hwmon_in:
> > + case hwmon_curr:
> > + case hwmon_power:
> > + *str = tps23861_port_label[channel];
> > + break;
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > + return 0;
> > +}
> > +
> > +static const struct hwmon_channel_info *tps23861_info[] = {
> > + HWMON_CHANNEL_INFO(chip,
> > + HWMON_C_REGISTER_TZ),
> > + HWMON_CHANNEL_INFO(temp,
> > + HWMON_T_INPUT),
> > + HWMON_CHANNEL_INFO(in,
> > + HWMON_I_INPUT | HWMON_I_LABEL,
> > + HWMON_I_INPUT | HWMON_I_LABEL,
> > + HWMON_I_INPUT | HWMON_I_LABEL,
> > + HWMON_I_INPUT | HWMON_I_LABEL,
> > + HWMON_I_INPUT | HWMON_I_LABEL),
> > + HWMON_CHANNEL_INFO(curr,
> > + HWMON_C_INPUT | HWMON_C_LABEL,
> > + HWMON_C_INPUT | HWMON_C_LABEL,
> > + HWMON_C_INPUT | HWMON_C_LABEL,
> > + HWMON_C_INPUT | HWMON_C_LABEL),
> > + HWMON_CHANNEL_INFO(power,
> > + HWMON_P_INPUT | HWMON_P_LABEL,
> > + HWMON_P_INPUT | HWMON_P_LABEL,
> > + HWMON_P_INPUT | HWMON_P_LABEL,
> > + HWMON_P_INPUT | HWMON_P_LABEL),
> > + NULL
> > +};
> > +
> > +static const struct hwmon_ops tps23861_hwmon_ops = {
> > + .is_visible = tps23861_is_visible,
> > + .read = tps23861_read,
> > + .read_string = tps23861_read_string,
> > +};
> > +
> > +static const struct hwmon_chip_info tps23861_chip_info = {
> > + .ops = &tps23861_hwmon_ops,
> > + .info = tps23861_info,
> > +};
> > +
> > +static ssize_t tps23861_port_status_show(struct device *dev,
> > + struct device_attribute *da,
> > + char *buf)
> > +{
> > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> > + struct tps23861_data *data = dev_get_drvdata(dev);
> > + char *detect_status, *class_status;
> > + unsigned int regval;
> > + u8 class, detect;
> > +
> > + regmap_read(data->regmap, attr->index, &regval);
> > + detect = FIELD_GET(PORT_STATUS_DETECT_MASK, regval);
> > + class = FIELD_GET(PORT_STATUS_CLASS_MASK, regval);
> > +
> > + switch (detect) {
> > + case PORT_DETECT_UNKNOWN:
> > + detect_status = "Unknown device";
> > + break;
> > + case PORT_DETECT_SHORT:
> > + detect_status = "Short circuit detected";
> > + break;
> > + case PORT_DETECT_RESISTANCE_LOW:
> > + detect_status = "Too low resistance detected";
> > + break;
> > + case PORT_DETECT_RESISTANCE_OK:
> > + detect_status = "Valid resistance detected";
> > + break;
> > + case PORT_DETECT_RESISTANCE_HIGH:
> > + detect_status = "Too high resistance detected";
> > + break;
> > + case PORT_DETECT_OPEN_CIRCUIT:
> > + detect_status = "Open circuit detected";
> > + break;
> > + case PORT_DETECT_MOSFET_FAULT:
> > + detect_status = "MOSFET fault detected";
> > + break;
> > + case PORT_DETECT_LEGACY:
> > + detect_status = "Legacy device detected";
> > + break;
> > + case PORT_DETECT_CAPACITANCE_INVALID_BEYOND:
> > + detect_status = "Invalid capacitance, beyond clamp voltage";
> > + break;
> > + case PORT_DETECT_CAPACITANCE_INVALID_DELTA:
> > + detect_status = "Invalid capacitance, insufficient voltage delta";
> > + break;
> > + case PORT_DETECT_CAPACITANCE_OUT_OF_RANGE:
> > + detect_status = "Valid capacitance, outside of legacy range";
> > + break;
> > + case PORT_DETECT_RESERVED:
> > + case PORT_DETECT_RESERVED_2:
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + switch (class) {
> > + case PORT_CLASS_UNKNOWN:
> > + class_status = "Unknown class";
> > + break;
> > + case PORT_CLASS_RESERVED:
> > + case PORT_CLASS_0:
> > + class_status = "Class 0";
> > + break;
> > + case PORT_CLASS_1:
> > + class_status = "Class 1";
> > + break;
> > + case PORT_CLASS_2:
> > + class_status = "Class 2";
> > + break;
> > + case PORT_CLASS_3:
> > + class_status = "Class 3";
> > + break;
> > + case PORT_CLASS_4:
> > + class_status = "Class 4";
> > + break;
> > + case PORT_CLASS_OVERCURRENT:
> > + class_status = "Overcurrent";
> > + break;
> > + case PORT_CLASS_MISMATCH:
> > + class_status = "Class mismatch";
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return snprintf(buf, PAGE_SIZE, "%s, %s\n", detect_status, class_status);
> > +}
> > +
> > +static ssize_t tps23861_poe_plus_show(struct device *dev,
> > + struct device_attribute *da,
> > + char *buf)
> > +{
> > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> > + struct tps23861_data *data = dev_get_drvdata(dev);
> > + char *ports[4];
> > + unsigned int regval;
> > + int i;
> > +
> > + regmap_read(data->regmap, attr->index, &regval);
> > +
> > + for (i = 0; i < 4; i++) {
> > + if (BIT(i + 4) & regval)
> > + ports[i] = "Yes";
> > + else
> > + ports[i] = "No";
> > + }
> > +
> > + return snprintf(buf, PAGE_SIZE, "Port 1: %s\nPort 2: %s\nPort 3: %s\nPort 4: %s\n",
> > + ports[0], ports[1], ports[2], ports[3]);
> > +}
> > +
> > +static ssize_t tps23861_port_disable_store(struct device *dev,
> > + struct device_attribute *da,
> > + const char *buf, size_t count)
> > +{
> > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> > + struct tps23861_data *data = dev_get_drvdata(dev);
> > + unsigned int regval, port;
> > + int ret;
> > +
> > + ret = kstrtouint(buf, 0, &port);
> > + if (ret < 0)
> > + return ret;
> > +
> > + regmap_read(data->regmap, attr->index, &regval);
> > + regval |= BIT(port + 3);
> > + regmap_write(data->regmap, attr->index, regval);
> > +
> > + return count;
> > +}
> > +
> > +static ssize_t tps23861_port_enable_store(struct device *dev,
> > + struct device_attribute *da,
> > + const char *buf, size_t count)
> > +{
> > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> > + struct tps23861_data *data = dev_get_drvdata(dev);
> > + unsigned int regval, port;
> > + int ret;
> > +
> > + ret = kstrtouint(buf, 0, &port);
> > + if (ret < 0)
> > + return ret;
> > +
> > + regmap_read(data->regmap, attr->index, &regval);
> > + regval |= BIT(port - 1);
> > + regval |= BIT(port + 3);
> > + regmap_write(data->regmap, attr->index, regval);
> > +
> > + return count;
> > +}
> > +
> > +static SENSOR_DEVICE_ATTR_RO(port1_status, tps23861_port_status, PORT_1_STATUS);
> > +static SENSOR_DEVICE_ATTR_RO(port2_status, tps23861_port_status, PORT_2_STATUS);
> > +static SENSOR_DEVICE_ATTR_RO(port3_status, tps23861_port_status, PORT_3_STATUS);
> > +static SENSOR_DEVICE_ATTR_RO(port4_status, tps23861_port_status, PORT_4_STATUS);
> > +static SENSOR_DEVICE_ATTR_RO(poe_plus_status, tps23861_poe_plus, POE_PLUS);
>
> sysfs files are supposed to return simple values. If the above is desired/needed,
> I would suggest to implement debugfs attributes.

Ok, moved these to debugfs.
>
> > +static SENSOR_DEVICE_ATTR_WO(port_disable, tps23861_port_disable, POWER_ENABLE);
> > +static SENSOR_DEVICE_ATTR_WO(port_enable, tps23861_port_enable, DETECT_CLASS_RESTART);
> > +
>
> We already have standard enable attributes. Please use those.
> Also, a separate 'disable' attribute is unnecessary.

Ok, implemented enable/disable using hwmon_in_enable in v3.

Regards,
Robert
>
> > +static struct attribute *tps23861_attrs[] = {
> > + &sensor_dev_attr_port1_status.dev_attr.attr,
> > + &sensor_dev_attr_port2_status.dev_attr.attr,
> > + &sensor_dev_attr_port3_status.dev_attr.attr,
> > + &sensor_dev_attr_port4_status.dev_attr.attr,
> > + &sensor_dev_attr_poe_plus_status.dev_attr.attr,
> > + &sensor_dev_attr_port_disable.dev_attr.attr,
> > + &sensor_dev_attr_port_enable.dev_attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute_group tps23861_group = {
> > + .attrs = tps23861_attrs,
> > +};
> > +__ATTRIBUTE_GROUPS(tps23861);
> > +
> > +static int tps23861_probe(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + struct tps23861_data *data;
> > + struct device *hwmon_dev;
> > + u32 shunt_resistor;
> > +
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + data->regmap = devm_regmap_init_i2c(client, &tps23861_regmap_config);
> > + if (IS_ERR(data->regmap)) {
> > + dev_err(dev, "failed to allocate register map\n");
> > + return PTR_ERR(data->regmap);
> > + }
> > +
> > + if (of_property_read_u32(dev->of_node, "shunt-resistor-micro-ohms", &shunt_resistor) < 0)
> > + data->shunt_resistor = shunt_resistor;
> > + else
> > + data->shunt_resistor = SHUNT_RESISTOR_DEFAULT;
> > +
> > + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
> > + data, &tps23861_chip_info,
> > + tps23861_groups);
> > + return PTR_ERR_OR_ZERO(hwmon_dev);
> > +}
> > +
> > +static const struct of_device_id __maybe_unused tps23861_of_match[] = {
> > + { .compatible = "ti,tps23861", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, tps23861_of_match);
> > +
> > +static struct i2c_driver tps23861_driver = {
> > + .probe_new = tps23861_probe,
> > + .driver = {
> > + .name = "tps23861",
> > + .of_match_table = of_match_ptr(tps23861_of_match),
> > + },
> > +};
> > +module_i2c_driver(tps23861_driver);
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("Robert Marko <robert.marko@xxxxxxxxxx>");
> > +MODULE_DESCRIPTION("TI TPS23861 PoE PSE");
> >
>