Re: [PATCH v3 0/5] Add Microchip PolarFire Soc Support

[Atish Patra]

On Mon, Dec 21, 2020 at 7:19 PM Palmer Dabbelt <palmer@xxxxxxxxxxx> wrote:
>
> On Fri, 04 Dec 2020 00:58:30 PST (-0800), Atish Patra wrote:
> > This series adds minimal support for Microchip Polar Fire Soc Icicle kit.
> > It is rebased on v5.10-rc6 and depends on clock support.
> > Only MMC and ethernet drivers are enabled via this series.
> > The idea here is to add the foundational patches so that other drivers
> > can be added to on top of this. The device tree may change based on
> > feedback on bindings of individual driver support patches.
> >
> > This series has been tested on Qemu and Polar Fire Soc Icicle kit.
> > The following qemu series is necessary to test it on Qemu.
> >
> > The series can also be found at.
> > https://github.com/atishp04/linux/tree/polarfire_support_upstream_v3
> >
> > I noticed the latest version of mmc driver[2] hangs on the board with
> > the latest clock driver. That's why, I have tested with the old clock
> > driver available in the above github repo.
>
> IIRC the previous version was an RFC, but this is a PATCH.  I'd be generally
> happy to take it on for-next, but I don't want to merge something that doesn't
> boot and that I don't have any way to fix (I don't have one of the boards yet).
>

Fair enough. We can wait for clock patches to be merged before merging
this series.

> > [1] https://lists.nongnu.org/archive/html/qemu-devel/2020-10/msg08582.html
> > [2] https://www.spinics.net/lists/devicetree/msg383626.html
> >
> > Changes from v2->v3:
> > 1. Fixed a typo in dt binding.
> > 2. Included MAINTAINERS entry for PolarFire SoC.
> > 3. Improved the dts file by using lowercase clock names and keeping phy
> >    details in board specific dts file.
> >
> > Changes from v1->v2:
> > 1. Modified the DT to match the device tree in U-Boot.
> > 2. Added both eMMC & SDcard entries in DT. However, SD card is only enabled
> >    as it allows larger storage option for linux distros.
> >
> > Atish Patra (4):
> > RISC-V: Add Microchip PolarFire SoC kconfig option
> > dt-bindings: riscv: microchip: Add YAML documentation for the
> > PolarFire SoC
> > RISC-V: Initial DTS for Microchip ICICLE board
> > RISC-V: Enable Microchip PolarFire ICICLE SoC
> >
> > Conor Dooley (1):
> > MAINTAINERS: add microchip polarfire soc support
> >
> > .../devicetree/bindings/riscv/microchip.yaml  |  28 ++
> > MAINTAINERS                                   |   8 +
> > arch/riscv/Kconfig.socs                       |   7 +
> > arch/riscv/boot/dts/Makefile                  |   1 +
> > arch/riscv/boot/dts/microchip/Makefile        |   2 +
> > .../microchip/microchip-mpfs-icicle-kit.dts   |  72 ++++
> > .../boot/dts/microchip/microchip-mpfs.dtsi    | 331 ++++++++++++++++++
> > arch/riscv/configs/defconfig                  |   4 +
> > 8 files changed, 453 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/riscv/microchip.yaml
> > create mode 100644 arch/riscv/boot/dts/microchip/Makefile
> > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv

@Daire McNamara Do you have a v2 of the clock patch series that works
with the latest upstream.

-- 
Regards,
Atish