Re: [PATCH v2 2/6] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0

[Krzysztof Kozlowski]

On Tue, 22 Dec 2020 at 19:28, Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> On Mon, Dec 21, 2020 at 8:17 PM Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
> >
> > On Mon, Dec 21, 2020 at 8:12 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > >
> > > On Mon, Dec 21, 2020 at 08:09:47PM +0530, Jagan Teki wrote:
> > > > On Mon, Dec 21, 2020 at 7:35 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Mon, Dec 21, 2020 at 07:29:22PM +0530, Jagan Teki wrote:
> > > > > > On Mon, Dec 21, 2020 at 7:16 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Mon, Dec 21, 2020 at 05:01:47PM +0530, Jagan Teki wrote:
> > > > > > > > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
> > > > > > > >
> > > > > > > > C.TOUCH 2.0 is a general purpose carrier board with capacitive
> > > > > > > > touch interface support.
> > > > > > > >
> > > > > > > > i.Core MX8M Mini needs to mount on top of this Carrier board for
> > > > > > > > creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
> > > > > > > >
> > > > > > > > Add bindings for it.
> > > > > > > >
> > > > > > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > > Changes for v2:
> > > > > > > > - updated commit message
> > > > > > > >
> > > > > > > >  Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
> > > > > > > >  1 file changed, 2 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > > > > > > > index 67980dcef66d..e653e0a43016 100644
> > > > > > > > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > > > > > > > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > > > > > > > @@ -667,6 +667,8 @@ properties:
> > > > > > > >          items:
> > > > > > > >            - enum:
> > > > > > > >                - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
> > > > > > > > +              - engicam,icore-mx8mm               # i.MX8MM Engicam i.Core MX8M Mini SOM
> > > > > > > > +              - engicam,icore-mx8mm-ctouch2       # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
> > > > > > >
> > > > > > > Please test your DTS against new schema with dtbs_check. This won't
> > > > > > > match.
> > > > > >
> > > > > > Sorry, not sure I understand clearly here.
> > > > > >
> > > > > > This the dts file ie used matched compatible.
> > > > > > compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
> > > > > >                      "fsl,imx8mm";
> > > > > >
> > > > > > I did build the dtbs_check without showing any issues like,
> > > > > >
> > > > > > $ make ARCH=arm64 dtbs_check
> > > > > > ...
> > > > > >
> > > > > >     From schema: /w/dt-schema/dt-schema/dtschema/schemas/property-units.yaml
> > > > > >   DTC     arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dtb
> > > > > >   DTC     arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2-of10.dtb
> > > > > >   DTC     arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dtb
> > > > > > ..
> > > > > >
> > > > > > Can you let me know what I missed here?
> > > > >
> > > > > You pasted here output of validating with property-units.yaml (or
> > > > > something else), not the schema which you changed. If you want to limit
> > > > > the tests, use DT_SCHEMA_FILES.
> > > > >
> > > > > I mentioned about exactly the same problem in yout previous v1
> > > > > at patch #5. No changes here stil.
> > > >
> > > > Yes, I usually did that check before posting. Please check the build
> > > > log below and fsl.yaml binding is fine to build.
> > > >
> > > > # make dt_binding_check DT_SCHEMA_FILES=arm/fsl.yaml
> > >
> > > 1. Wrong path to schema file,
> > > 2. Bindings pass, they are not a problem. You were running dtbs_check,
> > > right?
> >
> > But kbuild is building the fsl.yaml I did verify with by adding some
> > wrong character in the file, it is showing build issues.
> >
> > Please check the clean log.
> >
> > # make mrproper
> >   CLEAN   Documentation/devicetree/bindings
> >   CLEAN   scripts/basic
> >   CLEAN   scripts/dtc
> > # make dt_binding_check
> > DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/fsl.yaml
> >   HOSTCC  scripts/basic/fixdep
> >   HOSTCC  scripts/dtc/dtc.o
> >   HOSTCC  scripts/dtc/flattree.o
> >   HOSTCC  scripts/dtc/fstree.o
> >   HOSTCC  scripts/dtc/data.o
> >   HOSTCC  scripts/dtc/livetree.o
> >   HOSTCC  scripts/dtc/treesource.o
> >   HOSTCC  scripts/dtc/srcpos.o
> >   HOSTCC  scripts/dtc/checks.o
> >   HOSTCC  scripts/dtc/util.o
> >   LEX     scripts/dtc/dtc-lexer.lex.c
> >   YACC    scripts/dtc/dtc-parser.tab.[ch]
> >   HOSTCC  scripts/dtc/dtc-lexer.lex.o
> >   HOSTCC  scripts/dtc/dtc-parser.tab.o
> >   HOSTCC  scripts/dtc/yamltree.o
> >   HOSTLD  scripts/dtc/dtc
> >   CHKDT   Documentation/devicetree/bindings/processed-schema-examples.json
> > /w/linux/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml:
> > 'additionalProperties' is a required property
> > /w/linux/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml:
> > 'additionalProperties' is a required property
> > /w/linux/Documentation/devicetree/bindings/media/coda.yaml:
> > 'additionalProperties' is a required property
> > /w/linux/Documentation/devicetree/bindings/serial/litex,liteuart.yaml:
> > 'additionalProperties' is a required property
> >   SCHEMA  Documentation/devicetree/bindings/processed-schema-examples.json
> > /w/linux/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml:
> > ignoring, error in schema:
> > warning: no schema found in file:
> > ./Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> > /w/linux/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml:
> > ignoring, error in schema:
> > warning: no schema found in file:
> > ./Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
> > /w/linux/Documentation/devicetree/bindings/media/coda.yaml: ignoring,
> > error in schema:
> > warning: no schema found in file:
> > ./Documentation/devicetree/bindings/media/coda.yaml
> > /w/linux/Documentation/devicetree/bindings/serial/litex,liteuart.yaml:
> > ignoring, error in schema:
> > warning: no schema found in file:
> > ./Documentation/devicetree/bindings/serial/litex,liteuart.yaml
> >   DTEX    Documentation/devicetree/bindings/arm/fsl.example.dts
> >   DTC     Documentation/devicetree/bindings/arm/fsl.example.dt.yaml
> >   CHECK   Documentation/devicetree/bindings/arm/fsl.example.dt.yaml
>
> Any further comments? I'm planning to send v3.

What comments do you need? Your schema and DTS are wrong. If you run
dtbs_check, which I mentioned in the first email, you would see the
result. Instead you pasted unrelevant check of other bindings and
later pasted dt_binding_check. It does not make sense, so I clarified:
> 2. Bindings pass, they are not a problem. You were running dtbs_check, right?

And you pasted dt_binding_check, so it kind of closes the discussion.
I don't know what to add more.
I reported this problem already in v1, so please don't send the same
wrong code for the third time.

Best regards,
Krzysztof