[PATCH AUTOSEL 5.4 091/130] media: rcar-vin: Mask VNCSI_IFMD register

[Sasha Levin]

From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>

[ Upstream commit fb25ca37317200fa97ea6b8952e07958f06da7a6 ]

The VNCSI_IFMD register controls the data expansion mode and the
channel routing between the CSI-2 receivers and VIN instances.

According to the chip manual revision 2.20 not all fields are available
for all the SoCs:
- V3M, V3H and E3 do not support the DES1 field has they do not feature
  a CSI20 receiver.
- D3 only supports parallel input, and the whole register shall always
  be written as 0.

Inspect the per-SoC channel routing table where the available CSI-2
instances are reported and configure VNCSI_IFMD accordingly.

This patch supports this BSP change commit:

https://github.com/renesas-rcar/linux-bsp/commit/f54697394457
("media: rcar-vin: Fix VnCSI_IFMD register access for r8a77990")

[hverkuil: replace BSP commit ID with BSP URL]

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Suggested-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 25 +++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index e5f6360801082..5605a42f6de54 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1330,7 +1330,9 @@ int rvin_dma_register(struct rvin_dev *vin, int irq)
  */
 int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
 {
-	u32 ifmd, vnmc;
+	const struct rvin_group_route *route;
+	u32 ifmd = 0;
+	u32 vnmc;
 	int ret;
 
 	ret = pm_runtime_get_sync(vin->dev);
@@ -1343,9 +1345,26 @@ int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
 	vnmc = rvin_read(vin, VNMC_REG);
 	rvin_write(vin, vnmc & ~VNMC_VUP, VNMC_REG);
 
-	ifmd = VNCSI_IFMD_DES1 | VNCSI_IFMD_DES0 | VNCSI_IFMD_CSI_CHSEL(chsel);
+	/*
+	 * Set data expansion mode to "pad with 0s" by inspecting the routes
+	 * table to find out which bit fields are available in the IFMD
+	 * register. IFMD_DES1 controls data expansion mode for CSI20/21,
+	 * IFMD_DES0 controls data expansion mode for CSI40/41.
+	 */
+	for (route = vin->info->routes; route->mask; route++) {
+		if (route->csi == RVIN_CSI20 || route->csi == RVIN_CSI21)
+			ifmd |= VNCSI_IFMD_DES1;
+		else
+			ifmd |= VNCSI_IFMD_DES0;
 
-	rvin_write(vin, ifmd, VNCSI_IFMD_REG);
+		if (ifmd == (VNCSI_IFMD_DES0 | VNCSI_IFMD_DES1))
+			break;
+	}
+
+	if (ifmd) {
+		ifmd |= VNCSI_IFMD_CSI_CHSEL(chsel);
+		rvin_write(vin, ifmd, VNCSI_IFMD_REG);
+	}
 
 	vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
 
-- 
2.27.0