Re: [PATCH v6 11/12] mfd: bd9571mwv: Make the driver more generic

From: Lee Jones
Date: Wed Dec 23 2020 - 10:40:14 EST


On Wed, 23 Dec 2020, Yoshihiro Shimoda wrote:

> From: Khiem Nguyen <khiem.nguyen.xt@xxxxxxxxxxx>
>
> Since the driver supports BD9571MWV PMIC only, this patch makes
> the functions and data structure become more generic so that
> it can support other PMIC variants as well. Also remove printing
> part name which Lee Jones suggested.
>
> Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@xxxxxxxxxxx>
> Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Reviewed-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> ---
> drivers/mfd/bd9571mwv.c | 89 +++++++++++++++++++++++++------------------
> include/linux/mfd/bd9571mwv.h | 18 +--------
> 2 files changed, 54 insertions(+), 53 deletions(-)

Couple of small points.

Remainder looks good.

> diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
> index 49e968e..c905ab4 100644
> --- a/drivers/mfd/bd9571mwv.c
> +++ b/drivers/mfd/bd9571mwv.c
> @@ -3,6 +3,7 @@
> * ROHM BD9571MWV-M MFD driver
> *
> * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> + * Copyright (C) 2020 Renesas Electronics Corporation
> *
> * Based on the TPS65086 driver
> */
> @@ -14,6 +15,14 @@
>
> #include <linux/mfd/bd9571mwv.h>
>
> +/* Driver data to distinguish bd957x variants */
> +struct bd957x_ddata {
> + const struct regmap_config *regmap_config;
> + const struct regmap_irq_chip *irq_chip;

> + const struct mfd_cell *cells;
> + int num_cells;

Are you using these post-probe?

If not, they're not ddata.

> +};

[...]

> static int bd9571mwv_probe(struct i2c_client *client,
> - const struct i2c_device_id *ids)
> + const struct i2c_device_id *ids)
> {
> - struct bd9571mwv *bd;
> - int ret;
> -
> - bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
> - if (!bd)
> - return -ENOMEM;
> -
> - i2c_set_clientdata(client, bd);
> - bd->dev = &client->dev;
> - bd->irq = client->irq;
> + const struct bd957x_ddata *ddata;
> + struct device *dev = &client->dev;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *irq_data;
> + int ret, irq = client->irq;
> +
> + /* Read the PMIC product code */
> + ret = i2c_smbus_read_byte_data(client, BD9571MWV_PRODUCT_CODE);
> + if (ret < 0) {
> + dev_err(dev, "Failed to read product code\n");
> + return ret;
> + }

Nit: '\n' here.

> + switch (ret) {
> + case BD9571MWV_PRODUCT_CODE_BD9571MWV:
> + ddata = &bd9571mwv_ddata;

Simply declare 'const struct mfd_cell *cells' locally in probe and
assign it here instead.

> + break;
> + default:
> + dev_err(dev, "Unsupported device 0x%x\n", ret);
> + return -ENODEV;
> + }
>
> - bd->regmap = devm_regmap_init_i2c(client, &bd9571mwv_regmap_config);
> - if (IS_ERR(bd->regmap)) {
> - dev_err(bd->dev, "Failed to initialize register map\n");
> - return PTR_ERR(bd->regmap);
> + regmap = devm_regmap_init_i2c(client, ddata->regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(dev, "Failed to initialize register map\n");
> + return PTR_ERR(regmap);
> }

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog