Re: [PATCH V2 5/9] arm64: dts: renesas: beacon: Cleanup USB References

[Sergei Shtylyov]

On 24.12.2020 20:04, Adam Ford wrote:

> The programmable versaclock is used for the usb_extal reference clock for
> the EHCI driver instead of a fixed-clock.  Because the versaclock needs to
> be enabled, the clock reference needs to be added to the clocks list.
>
> For the USB3 Phy, the perferred clock reference is usb3s_clk, so

   PHY. Preferred.

> remove the usb_extal reference.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
[...]
> diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> index ade2f58ad99b..a6f7193e4d97 100644
> --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
[...]
> @@ -315,16 +306,12 @@ &sdhi3 {
>   	vmmc-supply = <&reg_3p3v>;
>   	vqmmc-supply = <&reg_1p8v>;
>   	bus-width = <8>;
> -	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;

   Unrelated?

>   	non-removable;
>   	fixed-emmc-driver-type = <1>;
>   	status = "okay";
>   };
[...]

MBR, Sergei