[PATCH v16 08/10] fs/ntfs3: Add Kconfig, Makefile and doc

[Konstantin Komarov]

This adds Kconfig, Makefile and doc

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@xxxxxxxxxxxxxxxxxxxx>
---
 Documentation/filesystems/ntfs3.rst | 107 ++++++++++++++++++++++++++++
 fs/ntfs3/Kconfig                    |  41 +++++++++++
 fs/ntfs3/Makefile                   |  31 ++++++++
 3 files changed, 179 insertions(+)
 create mode 100644 Documentation/filesystems/ntfs3.rst
 create mode 100644 fs/ntfs3/Kconfig
 create mode 100644 fs/ntfs3/Makefile

diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst
new file mode 100644
index 000000000000..fb29067360cc
--- /dev/null
+++ b/Documentation/filesystems/ntfs3.rst
@@ -0,0 +1,107 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====
+NTFS3
+=====
+
+
+Summary and Features
+====================
+
+NTFS3 is fully functional NTFS Read-Write driver. The driver works with
+NTFS versions up to 3.1, normal/compressed/sparse files
+and journal replaying. File system type to use on mount is 'ntfs3'.
+
+- This driver implements NTFS read/write support for normal, sparse and
+  compressed files.
+- Supports native journal replaying;
+- Supports extended attributes
+	Predefined extended attributes:
+	- 'system.ntfs_security' gets/sets security
+			descriptor (SECURITY_DESCRIPTOR_RELATIVE)
+	- 'system.ntfs_attrib' gets/sets ntfs file/dir attributes.
+		Note: applied to empty files, this allows to switch type between
+		sparse(0x200), compressed(0x800) and normal;
+- Supports NFS export of mounted NTFS volumes.
+
+Mount Options
+=============
+
+The list below describes mount options supported by NTFS3 driver in addition to
+generic ones.
+
+===============================================================================
+
+nls=name		This option informs the driver how to interpret path
+			strings and translate them to Unicode and back. If
+			this option is not set, the default codepage will be
+			used (CONFIG_NLS_DEFAULT).
+			Examples:
+				'nls=utf8'
+
+uid=
+gid=
+umask=			Controls the default permissions for files/directories created
+			after the NTFS volume is mounted.
+
+fmask=
+dmask=			Instead of specifying umask which applies both to
+			files and directories, fmask applies only to files and
+			dmask only to directories.
+
+nohidden		Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN)
+			attribute will not be shown under Linux.
+
+sys_immutable		Files with the Windows-specific SYSTEM
+			(FILE_ATTRIBUTE_SYSTEM) attribute will be marked as system
+			immutable files.
+
+discard			Enable support of the TRIM command for improved performance
+			on delete operations, which is recommended for use with the
+			solid-state drives (SSD).
+
+force			Forces the driver to mount partitions even if 'dirty' flag
+			(volume dirty) is set. Not recommended for use.
+
+sparse			Create new files as "sparse".
+
+showmeta		Use this parameter to show all meta-files (System Files) on
+			a mounted NTFS partition.
+			By default, all meta-files are hidden.
+
+prealloc		Preallocate space for files excessively when file size is
+			increasing on writes. Decreases fragmentation in case of
+			parallel write operations to different files.
+
+no_acs_rules		"No access rules" mount option sets access rights for
+			files/folders to 777 and owner/group to root. This mount
+			option absorbs all other permissions:
+			- permissions change for files/folders will be reported
+				as successful, but they will remain 777;
+			- owner/group change will be reported as successful, but
+				they will stay as root
+
+acl			Support POSIX ACLs (Access Control Lists). Effective if
+			supported by Kernel. Not to be confused with NTFS ACLs.
+			The option specified as acl enables support for POSIX ACLs.
+
+noatime			All files and directories will not update their last access
+			time attribute if a partition is mounted with this parameter.
+			This option can speed up file system operation.
+
+===============================================================================
+
+ToDo list
+=========
+
+- Full journaling support (currently journal replaying is supported) over JBD.
+
+
+References
+==========
+https://www.paragon-software.com/home/ntfs-linux-professional/
+	- Commercial version of the NTFS driver for Linux.
+
+almaz.alexandrovich@xxxxxxxxxxxxxxxxxxxx
+	- Direct e-mail address for feedback and requests on the NTFS3 implementation.
+
diff --git a/fs/ntfs3/Kconfig b/fs/ntfs3/Kconfig
new file mode 100644
index 000000000000..f9b732f4a5a0
--- /dev/null
+++ b/fs/ntfs3/Kconfig
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NTFS3_FS
+	tristate "NTFS Read-Write file system support"
+	select NLS
+	help
+	  Windows OS native file system (NTFS) support up to NTFS version 3.1.
+
+	  Y or M enables the NTFS3 driver with full features enabled (read,
+	  write, journal replaying, sparse/compressed files support).
+	  File system type to use on mount is "ntfs3". Module name (M option)
+	  is also "ntfs3".
+
+	  Documentation: <file:Documentation/filesystems/ntfs3.rst>
+
+config NTFS3_64BIT_CLUSTER
+	bool "64 bits per NTFS clusters"
+	depends on NTFS3_FS && 64BIT
+	help
+	  Windows implementation of ntfs.sys uses 32 bits per clusters.
+	  If activated 64 bits per clusters you will be able to use 4k cluster
+	  for 16T+ volumes. Windows will not be able to mount such volumes.
+
+	  It is recommended to say N here.
+
+config NTFS3_LZX_XPRESS
+	bool "activate support of external compressions lzx/xpress"
+	depends on NTFS3_FS
+	help
+	  In Windows 10 one can use command "compact" to compress any files.
+	  4 possible variants of compression are: xpress4k, xpress8k, xpress16 and lzx.
+	  To read such "compacted" files say Y here.
+
+config NTFS3_POSIX_ACL
+	bool "NTFS POSIX Access Control Lists"
+	depends on NTFS3_FS
+	select FS_POSIX_ACL
+	help
+	  POSIX Access Control Lists (ACLs) support additional access rights
+	  for users and groups beyond the standard owner/group/world scheme,
+	  and this option selects support for ACLs specifically for ntfs
+	  filesystems.
diff --git a/fs/ntfs3/Makefile b/fs/ntfs3/Makefile
new file mode 100644
index 000000000000..b9aacc061781
--- /dev/null
+++ b/fs/ntfs3/Makefile
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the ntfs3 filesystem support.
+#
+
+obj-$(CONFIG_NTFS3_FS) += ntfs3.o
+
+ntfs3-y :=	attrib.o \
+		attrlist.o \
+		bitfunc.o \
+		bitmap.o \
+		dir.o \
+		fsntfs.o \
+		frecord.o \
+		file.o \
+		fslog.o \
+		inode.o \
+		index.o \
+		lznt.o \
+		namei.o \
+		record.o \
+		run.o \
+		super.o \
+		upcase.o \
+		xattr.o
+
+ntfs3-$(CONFIG_NTFS3_LZX_XPRESS) += $(addprefix lib/,\
+		decompress_common.o \
+		lzx_decompress.o \
+		xpress_decompress.o \
+		)
\ No newline at end of file
-- 
2.25.4