[PATCH v3 2/3] drivers/soc/litex: separate MMIO from subregister offset calculation

[Gabriel Somlo]

Separate MMIO (read/write) access into _[read|write]_litex_subregister()
static inline functions, leaving existing "READ|WRITE" macros to handle
calculation of the subregister offset only.

NOTE: this is a non-functional change.

Signed-off-by: Gabriel Somlo <gsomlo@xxxxxxxxx>
---
 include/linux/litex.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/linux/litex.h b/include/linux/litex.h
index 67c1a18a7425..918bab45243c 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -24,11 +24,23 @@
 #define LITEX_SUBREG_SIZE	0x1
 #define LITEX_SUBREG_SIZE_BIT	 (LITEX_SUBREG_SIZE * 8)
 
+static inline void _write_litex_subregister(u32 val, void __iomem *addr)
+{
+	writel((u32 __force)cpu_to_le32(val), addr);
+}
+
+static inline u32 _read_litex_subregister(void __iomem *addr)
+{
+	return le32_to_cpu((__le32 __force)readl(addr));
+}
+
 #define WRITE_LITEX_SUBREGISTER(val, base_offset, subreg_id) \
-	writel((u32 __force)cpu_to_le32(val), base_offset + (LITEX_REG_SIZE * subreg_id))
+	_write_litex_subregister(val, (base_offset) + \
+					LITEX_REG_SIZE * (subreg_id))
 
 #define READ_LITEX_SUBREGISTER(base_offset, subreg_id) \
-	le32_to_cpu((__le32 __force)readl(base_offset + (LITEX_REG_SIZE * subreg_id)))
+	_read_litex_subregister((base_offset) + \
+					LITEX_REG_SIZE * (subreg_id))
 
 /*
  * LiteX SoC Generator, depending on the configuration, can split a single
-- 
2.26.2