Re: [PATCH v4 2/2] power: supply: bq25790: Introduce the BQ25790 charger driver

From: Sebastian Reichel
Date: Sun Dec 27 2020 - 13:48:37 EST

Hi,

Sorry, took me a lot longer than expected...

On Fri, Oct 09, 2020 at 09:41:12AM -0500, Dan Murphy wrote:
> BQ25790 is a highly integrated switch-mode buck-boost charger
> for 1-4 cell Li-ion battery and Li-polymer battery.
>
> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> drivers/power/supply/Kconfig | 8 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/bq25790_charger.c | 1121 ++++++++++++++++++++++++
> drivers/power/supply/bq25790_charger.h | 150 ++++
> 4 files changed, 1280 insertions(+)
> create mode 100644 drivers/power/supply/bq25790_charger.c
> create mode 100644 drivers/power/supply/bq25790_charger.h
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index eec646c568b7..1cc361238d9a 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -628,6 +628,14 @@ config CHARGER_BQ2515X
> rail, ADC for battery and system monitoring, and push-button
> controller.
>
> +config CHARGER_BQ25790
> + tristate "TI BQ25790 battery charger driver"
> + depends on I2C
> + depends on GPIOLIB || COMPILE_TEST
> + select REGMAP_I2C
> + help
> + Say Y to enable support for the TI BQ25790 battery charger.
> +
> config CHARGER_BQ25890
> tristate "TI BQ25890 battery charger driver"
> depends on I2C
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index dd4b86318cd9..29b71cc92550 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -83,6 +83,7 @@ obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
> obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
> obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
> obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
> +obj-$(CONFIG_CHARGER_BQ25790) += bq25790_charger.o
> obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
> obj-$(CONFIG_CHARGER_BQ25980) += bq25980_charger.o
> obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
> diff --git a/drivers/power/supply/bq25790_charger.c b/drivers/power/supply/bq25790_charger.c
> new file mode 100644
> index 000000000000..838a49c2f9f0
> --- /dev/null
> +++ b/drivers/power/supply/bq25790_charger.c
> @@ -0,0 +1,1121 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// BQ25790 driver
> +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/usb/phy.h>
> +
> +#include <linux/acpi.h>
> +#include <linux/of.h>
> +
> +#include "bq25790_charger.h"
> +
> +#define BQ25790_NUM_WD_VAL 8
> +
> +struct bq25790_init_data {
> + u32 ichg;
> + u32 ilim;
> + u32 vreg;
> + u32 iterm;
> + u32 iprechg;
> + u32 vlim;
> + u32 ichg_max;
> + u32 vreg_max;
> +};
> +
> +struct bq25790_state {
> + bool online;
> + u8 chrg_status;
> + u8 chrg_type;
> + u8 health;
> + u8 chrg_fault;
> + u8 vsys_status;
> + u8 vbus_status;
> + u8 fault_0;
> + u8 fault_1;
> + u32 vbat_adc;
> + u32 vbus_adc;
> + u32 ibat_adc;
> +};
> +
> +struct bq25790_device {
> + struct i2c_client *client;
> + struct device *dev;
> + struct power_supply *charger;
> + struct power_supply *battery;
> + struct mutex lock;
> +
> + struct usb_phy *usb2_phy;
> + struct usb_phy *usb3_phy;
> + struct notifier_block usb_nb;
> + struct work_struct usb_work;
> + unsigned long usb_event;
> + struct regmap *regmap;
> +
> + char model_name[I2C_NAME_SIZE];
> + int device_id;
> +
> + struct bq25790_init_data init_data;
> + struct bq25790_state state;
> + int watchdog_timer;
> +};
> +
> +static struct reg_default bq25790_reg_defs[] = {
> + {BQ25790_INPUT_V_LIM, 0x24},
> + {BQ25790_INPUT_I_LIM_MSB, 0x01},
> + {BQ25790_INPUT_I_LIM_LSB, 0x2c},
> + {BQ25790_PRECHRG_CTRL, 0xc3},
> + {BQ25790_TERM_CTRL, 0x5},
> + {BQ25790_VOTG_REG, 0xdc},
> + {BQ25790_IOTG_REG, 0x4b},
> + {BQ25790_TIMER_CTRL, 0x3d},
> + {BQ25790_CHRG_CTRL_0, 0xa2},
> + {BQ25790_CHRG_CTRL_1, 0x85},
> + {BQ25790_CHRG_CTRL_2, 0x40},
> + {BQ25790_CHRG_CTRL_3, 0x12},
> + {BQ25790_CHRG_CTRL_5, 0x16},
> + {BQ25790_MPPT_CTRL, 0xaa},
> + {BQ25790_TEMP_CTRL, 0xc0},
> + {BQ25790_NTC_CTRL_0, 0x7a},
> + {BQ25790_NTC_CTRL_1, 0x54},
> + {BQ25790_ICO_I_LIM, 0x0},
> + {BQ25790_CHRG_STAT_0, 0x0},
> + {BQ25790_CHRG_STAT_1, 0x0},
> + {BQ25790_CHRG_STAT_2, 0x0},
> + {BQ25790_CHRG_STAT_3, 0x0},
> + {BQ25790_CHRG_STAT_4, 0x0},
> + {BQ25790_FAULT_STAT_0, 0x0},
> + {BQ25790_FAULT_STAT_1, 0x0},
> + {BQ25790_CHRG_FLAG_0, 0x0},
> + {BQ25790_CHRG_FLAG_1, 0x0},
> + {BQ25790_CHRG_FLAG_2, 0x0},
> + {BQ25790_CHRG_FLAG_3, 0x0},
> + {BQ25790_FAULT_FLAG_0, 0x0},
> + {BQ25790_FAULT_FLAG_1, 0x0},
> + {BQ25790_CHRG_MSK_0, 0x0},
> + {BQ25790_CHRG_MSK_1, 0x0},
> + {BQ25790_CHRG_MSK_2, 0x0},
> + {BQ25790_CHRG_MSK_3, 0x0},
> + {BQ25790_FAULT_MSK_0, 0x0},
> + {BQ25790_FAULT_MSK_1, 0x0},
> + {BQ25790_ADC_CTRL, 0x30},
> + {BQ25790_FN_DISABE_0, 0x0},
> + {BQ25790_FN_DISABE_1, 0x0},
> + {BQ25790_ADC_IBUS, 0x0},
> + {BQ25790_ADC_IBAT_MSB, 0x0},
> + {BQ25790_ADC_IBAT_LSB, 0x0},
> + {BQ25790_ADC_VBUS_MSB, 0x0},
> + {BQ25790_ADC_VBUS_LSB, 0x0},
> + {BQ25790_ADC_VAC1, 0x0},
> + {BQ25790_ADC_VAC2, 0x0},
> + {BQ25790_ADC_VBAT_MSB, 0x0},
> + {BQ25790_ADC_VBAT_LSB, 0x0},
> + {BQ25790_ADC_VBUS_MSB, 0x0},
> + {BQ25790_ADC_VBUS_LSB, 0x0},
> + {BQ25790_ADC_TS, 0x0},
> + {BQ25790_ADC_TDIE, 0x0},
> + {BQ25790_ADC_DP, 0x0},
> + {BQ25790_ADC_DM, 0x0},
> + {BQ25790_DPDM_DRV, 0x0},
> + {BQ25790_PART_INFO, 0x0},
> +};
> +
> +static int bq25790_watchdog_time[BQ25790_NUM_WD_VAL] = {0, 500, 1000, 2000,
> + 20000, 40000, 80000,
> + 160000};
> +
> +static enum power_supply_usb_type bq25790_usb_type[] = {
> + POWER_SUPPLY_USB_TYPE_PD_DRP,
> + POWER_SUPPLY_USB_TYPE_SDP,
> + POWER_SUPPLY_USB_TYPE_CDP,
> + POWER_SUPPLY_USB_TYPE_DCP,
> + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> +};
> +
> +static int bq25790_usb_notifier(struct notifier_block *nb, unsigned long val,
> + void *priv)
> +{
> + struct bq25790_device *bq =
> + container_of(nb, struct bq25790_device, usb_nb);
> +
> + bq->usb_event = val;
> + queue_work(system_power_efficient_wq, &bq->usb_work);
> +
> + return NOTIFY_OK;
> +}
> +
> +static void bq25790_usb_work(struct work_struct *data)
> +{
> + struct bq25790_device *bq =
> + container_of(data, struct bq25790_device, usb_work);
> +
> + switch (bq->usb_event) {
> + case USB_EVENT_ID:
> + break;
> +
> + case USB_EVENT_NONE:
> + power_supply_changed(bq->charger);
> + break;
> + }
> +
> + return;
> +}
> +
> +static int bq25790_get_vbat_adc(struct bq25790_device *bq)
> +{
> + int ret;
> + int vbat_adc_lsb, vbat_adc_msb;
> + u16 vbat_adc;
> +
> + ret = regmap_read(bq->regmap, BQ25790_ADC_VBAT_MSB, &vbat_adc_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_ADC_VBAT_LSB, &vbat_adc_lsb);
> + if (ret)
> + return ret;
> +
> + vbat_adc = (vbat_adc_msb << 8) | vbat_adc_lsb;
> +
> + return vbat_adc * BQ25790_ADC_VOLT_STEP_uV;
> +}
> +
> +static int bq25790_get_vbus_adc(struct bq25790_device *bq)
> +{
> + int ret;
> + int vbus_adc_lsb, vbus_adc_msb;
> + u16 vbus_adc;
> +
> + ret = regmap_update_bits(bq->regmap, BQ25790_ADC_CTRL,
> + BQ25790_ADC_EN, BQ25790_ADC_EN);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_ADC_VBUS_MSB, &vbus_adc_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_ADC_VBUS_LSB, &vbus_adc_lsb);
> + if (ret)
> + return ret;
> +
> + vbus_adc = (vbus_adc_msb << 8) | vbus_adc_lsb;
> +
> + return vbus_adc * BQ25790_ADC_VOLT_STEP_uV;
> +}
> +
> +static int bq25790_get_ibat_adc(struct bq25790_device *bq)
> +{
> + int ret;
> + int ibat_adc_lsb, ibat_adc_msb;
> + u16 ibat_adc;
> +
> + ret = regmap_read(bq->regmap, BQ25790_ADC_IBAT_MSB, &ibat_adc_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_ADC_IBAT_LSB, &ibat_adc_lsb);
> + if (ret)
> + return ret;
> +
> + ibat_adc = (ibat_adc_msb << 8) | ibat_adc_lsb;
> +
> + return ibat_adc * BQ25790_ADC_CURR_STEP_uA;
> +}
> +
> +static int bq25790_get_term_curr(struct bq25790_device *bq)
> +{
> + int ret;
> + int reg_val;
> +
> + ret = regmap_read(bq->regmap, BQ25790_TERM_CTRL, &reg_val);
> + if (ret)
> + return ret;
> +
> + reg_val &= BQ25790_TERMCHRG_CUR_MASK;
> +
> + return reg_val * BQ25790_TERMCHRG_CURRENT_STEP_uA;
> +}
> +
> +static int bq25790_get_prechrg_curr(struct bq25790_device *bq)
> +{
> + int ret;
> + int reg_val;
> +
> + ret = regmap_read(bq->regmap, BQ25790_PRECHRG_CTRL, &reg_val);
> + if (ret)
> + return ret;
> +
> + reg_val &= BQ25790_PRECHRG_CUR_MASK;
> +
> + return reg_val * BQ25790_PRECHRG_CURRENT_STEP_uA;
> +}
> +
> +static int bq25790_get_ichg_curr(struct bq25790_device *bq)
> +{
> + int ret;
> + int ichg, ichg_lsb, ichg_msb;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_I_LIM_LSB, &ichg_lsb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_I_LIM_MSB, &ichg_msb);
> + if (ret)
> + return ret;
> +
> + ichg = (ichg_msb << 8) | ichg_lsb;
> +
> + return ichg * BQ25790_ICHRG_CURRENT_STEP_uA;
> +}
> +
> +static int bq25790_set_term_curr(struct bq25790_device *bq, int term_current)
> +{
> + int reg_val;
> +
> + if (term_current < BQ25790_TERMCHRG_I_MIN_uA ||
> + term_current > BQ25790_TERMCHRG_I_MAX_uA)
> + return -EINVAL;
> +
> + reg_val = term_current / BQ25790_TERMCHRG_CURRENT_STEP_uA;
> +
> + return regmap_update_bits(bq->regmap, BQ25790_TERM_CTRL,
> + BQ25790_TERMCHRG_CUR_MASK, reg_val);
> +}
> +
> +static int bq25790_set_prechrg_curr(struct bq25790_device *bq, int pre_current)
> +{
> + int reg_val;
> +
> + if (pre_current < BQ25790_PRECHRG_I_MIN_uA ||
> + pre_current > BQ25790_PRECHRG_I_MAX_uA)
> + return -EINVAL;
> +
> + reg_val = pre_current / BQ25790_PRECHRG_CURRENT_STEP_uA;
> +
> + return regmap_update_bits(bq->regmap, BQ25790_PRECHRG_CTRL,
> + BQ25790_PRECHRG_CUR_MASK, reg_val);
> +}
> +
> +static int bq25790_set_ichrg_curr(struct bq25790_device *bq, int chrg_curr)
> +{
> + int ret;
> + int ichg, ichg_msb, ichg_lsb;
> +
> + if (chrg_curr < BQ25790_ICHRG_I_MIN_uA ||
> + chrg_curr > BQ25790_ICHRG_I_MAX_uA)
> + return -EINVAL;
> +
> + ichg = chrg_curr / BQ25790_ICHRG_CURRENT_STEP_uA;
> + ichg_msb = (ichg >> 8) & 0xff;
> + ret = regmap_write(bq->regmap, BQ25790_CHRG_I_LIM_MSB, ichg_msb);
> + if (ret)
> + return ret;
> +
> + ichg_lsb = ichg & 0xff;
> +
> + return regmap_write(bq->regmap, BQ25790_CHRG_I_LIM_LSB, ichg_lsb);
> +}
> +
> +static int bq25790_set_chrg_volt(struct bq25790_device *bq, int chrg_volt)
> +{
> + int vlim_lsb, vlim_msb, vlim;
> + int ret;
> +
> + if (chrg_volt < BQ25790_VREG_V_MIN_uV ||
> + chrg_volt > BQ25790_VREG_V_MAX_uV)
> + return -EINVAL;
> +
> + vlim = chrg_volt / BQ25790_VREG_V_STEP_uV;
> + vlim_msb = (vlim >> 8) & 0xff;
> + ret = regmap_write(bq->regmap, BQ25790_CHRG_V_LIM_MSB, vlim_msb);
> + if (ret)
> + return ret;
> +
> + vlim_lsb = vlim & 0xff;
> +
> + return regmap_write(bq->regmap, BQ25790_CHRG_V_LIM_LSB, vlim_lsb);
> +}
> +
> +static int bq25790_get_chrg_volt(struct bq25790_device *bq)
> +{
> + int ret;
> + int vlim_lsb, vlim_msb, chrg_volt;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_V_LIM_MSB, &vlim_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_V_LIM_LSB, &vlim_lsb);
> + if (ret)
> + return ret;
> +
> + chrg_volt = (vlim_msb << 8) | vlim_lsb;
> +
> + return chrg_volt * BQ25790_VREG_V_STEP_uV;
> +}
> +
> +static int bq25790_set_input_volt_lim(struct bq25790_device *bq, int vindpm)
> +{
> + int ret;
> + int vlim_lsb, vlim_msb;
> + int vlim;
> +
> + if (vindpm < BQ25790_VINDPM_V_MIN_uV ||
> + vindpm > BQ25790_VINDPM_V_MAX_uV)
> + return -EINVAL;
> +
> + vlim = vindpm / BQ25790_VINDPM_STEP_uV;
> +
> + vlim_msb = (vlim >> 8) & 0xff;
> +
> + ret = regmap_write(bq->regmap, BQ25790_CHRG_V_LIM_MSB, vlim_msb);
> + if (ret)
> + return ret;
> +
> + vlim_lsb = vlim & 0xff;
> +
> + return regmap_write(bq->regmap, BQ25790_CHRG_V_LIM_LSB, vlim_lsb);
> +}
> +
> +static int bq25790_get_input_volt_lim(struct bq25790_device *bq)
> +{
> + int ret;
> + int vlim;
> +
> + ret = regmap_read(bq->regmap, BQ25790_INPUT_V_LIM, &vlim);
> + if (ret)
> + return ret;
> +
> + return vlim * BQ25790_VINDPM_STEP_uV;
> +}
> +
> +static int bq25790_set_input_curr_lim(struct bq25790_device *bq, int iindpm)
> +{
> + int ret;
> + int ilim, ilim_lsb, ilim_msb;
> +
> + if (iindpm < BQ25790_IINDPM_I_MIN_uA ||
> + iindpm > BQ25790_IINDPM_I_MAX_uA)
> + return -EINVAL;
> +
> + ilim = iindpm / BQ25790_IINDPM_STEP_uA;
> + ilim_msb = (ilim >> 8) & 0xff;
> +
> + ret = regmap_write(bq->regmap, BQ25790_INPUT_I_LIM_MSB, ilim_msb);
> + if (ret)
> + return ret;
> +
> + ilim_lsb = ilim & 0xff;
> +
> + return regmap_write(bq->regmap, BQ25790_INPUT_I_LIM_LSB, ilim_lsb);
> +}
> +
> +static int bq25790_get_input_curr_lim(struct bq25790_device *bq)
> +{
> + int ret;
> + int ilim_msb, ilim_lsb;
> + u16 ilim;
> +
> + ret = regmap_read(bq->regmap, BQ25790_INPUT_I_LIM_MSB, &ilim_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_INPUT_I_LIM_LSB, &ilim_lsb);
> + if (ret)
> + return ret;
> +
> + ilim = (ilim_msb << 8) | ilim_lsb;
> +
> + return ilim * BQ25790_IINDPM_STEP_uA;
> +}
> +
> +static int bq25790_get_state(struct bq25790_device *bq,
> + struct bq25790_state *state)
> +{
> + int chrg_stat_0, chrg_stat_1, chrg_stat_3, chrg_stat_4;
> + int chrg_ctrl_0, fault_0, fault_1;
> + int ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_STAT_0, &chrg_stat_0);
> + if (ret)
> + return ret;
> +
> + state->vbus_status = chrg_stat_0 & BQ25790_VBUS_PRESENT;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_STAT_1, &chrg_stat_1);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_CTRL_0, &chrg_ctrl_0);
> + if (ret)
> + return ret;
> +
> + if (chrg_ctrl_0 & BQ25790_CHRG_EN)
> + state->chrg_status = chrg_stat_1 & BQ25790_CHG_STAT_MSK;
> + else
> + state->chrg_status = BQ25790_NOT_CHRGING;
> +
> + state->chrg_type = chrg_stat_1 & BQ25790_VBUS_STAT_MSK;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_STAT_4, &chrg_stat_4);
> + if (ret)
> + return ret;
> +
> + state->health = chrg_stat_4 & BQ25790_TEMP_MASK;
> +
> + ret = regmap_read(bq->regmap, BQ25790_FAULT_STAT_0, &fault_0);
> + if (ret)
> + return ret;
> +
> + state->fault_0 = fault_0;
> +
> + ret = regmap_read(bq->regmap, BQ25790_FAULT_STAT_1, &fault_1);
> + if (ret)
> + return ret;
> +
> + state->fault_1 = fault_1;
> +
> + ret = regmap_read(bq->regmap, BQ25790_CHRG_STAT_3, &chrg_stat_3);
> + if (ret)
> + return ret;
> +
> + state->online = chrg_stat_3 & BQ25790_VSYS_STAT;
> +
> + state->vbat_adc = bq25790_get_vbat_adc(bq);
> +
> + state->vbus_adc = bq25790_get_vbus_adc(bq);
> +
> + state->ibat_adc = bq25790_get_ibat_adc(bq);
> +
> + return 0;
> +}
> +
> +static int bq25790_set_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + const union power_supply_propval *val)
> +{
> + struct bq25790_device *bq = power_supply_get_drvdata(psy);
> + int ret = -EINVAL;
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = bq25790_set_input_curr_lim(bq, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = bq25790_set_chrg_volt(bq, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = bq25790_set_ichrg_curr(bq, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = bq25790_set_prechrg_curr(bq, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + ret = bq25790_set_term_curr(bq, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_STATUS:
> + break;

what's the point of exposing PROP_STATUS and always returning
EINVAL?

> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + ret = bq25790_set_input_volt_lim(bq, val->intval);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int bq25790_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct bq25790_device *bq = power_supply_get_drvdata(psy);
> + struct bq25790_state state;
> + int ret = 0;
> +
> + mutex_lock(&bq->lock);
> + ret = bq25790_get_state(bq, &state);
> + mutex_unlock(&bq->lock);

useless lock, since state is a function local variable.

> + if (ret)
> + return ret;
> +
> + switch (psp) {

please be consistent with newlines after break :)

> + case POWER_SUPPLY_PROP_STATUS:
> + if (!state.chrg_type || (state.chrg_type == BQ25790_OTG_MODE))
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + else if (!state.chrg_status)
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + else if (state.chrg_status == BQ25790_TERM_CHRG)
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + else
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + switch (state.chrg_status) {
> + case BQ25790_TRICKLE_CHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + case BQ25790_PRECHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + case BQ25790_FAST_CHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
> + break;
> + case BQ25790_TAPER_CHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
> + break;
> + case BQ25790_TOP_OFF_CHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + case BQ25790_NOT_CHRGING:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
> + break;
> + default:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
> + }
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = BQ25790_MANUFACTURER;
> + break;
> +
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = BQ25790_NAME;

I think it's better to report bq->model_name (and otherwise that
field is unused :))

> + break;
> +
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = state.online;
> + break;
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + if (!state.chrg_type) {
> + val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> + break;
> + }
> + switch (state.chrg_type) {
> + case BQ25790_USB_SDP:
> + val->intval = POWER_SUPPLY_USB_TYPE_SDP;
> + break;
> + case BQ25790_USB_CDP:
> + val->intval = POWER_SUPPLY_USB_TYPE_CDP;
> + break;
> + case BQ25790_USB_DCP:
> + val->intval = POWER_SUPPLY_USB_TYPE_DCP;
> + break;
> + case BQ25790_OTG_MODE:
> + val->intval = POWER_SUPPLY_USB_TYPE_PD_DRP;
> + break;
> +
> + default:
> + val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> + break;
> + }
> + break;
> +
> + case POWER_SUPPLY_PROP_HEALTH:
> + if (state.fault_1 & (BQ25790_OTG_OVP | BQ25790_VSYS_OVP))
> + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> + else
> + val->intval = POWER_SUPPLY_HEALTH_GOOD;
> +
> + switch (state.health) {
> + case BQ25790_TEMP_HOT:
> + val->intval = POWER_SUPPLY_HEALTH_HOT;
> + break;
> + case BQ25790_TEMP_WARM:
> + val->intval = POWER_SUPPLY_HEALTH_WARM;
> + break;
> + case BQ25790_TEMP_COOL:
> + val->intval = POWER_SUPPLY_HEALTH_COOL;
> + break;
> + case BQ25790_TEMP_COLD:
> + val->intval = POWER_SUPPLY_HEALTH_COLD;
> + break;
> + }
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = bq25790_get_ichg_curr(bq);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> +
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = bq25790_get_chrg_volt(bq);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> +
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = bq25790_get_prechrg_curr(bq);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + ret = bq25790_get_term_curr(bq);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = state.vbus_adc;
> + break;
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + ret = bq25790_get_input_volt_lim(bq);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = bq25790_get_input_curr_lim(bq);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int bq25790_battery_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct bq25790_device *bq = power_supply_get_drvdata(psy);
> + struct bq25790_state state;
> + int ret = 0;
> +
> + mutex_lock(&bq->lock);
> + ret = bq25790_get_state(bq, &state);
> + mutex_unlock(&bq->lock);

another useless lock, since state is also a function local variable
in this place.

> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(bq->regmap, BQ25790_ADC_CTRL,
> + BQ25790_ADC_EN, BQ25790_ADC_EN);
> + if (ret)
> + return ret;

why is ADC enabled here?

> +
> + switch (psp) {

please also be consistent with newline after break in this
switch statement.

> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + val->intval = bq->init_data.ichg_max;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + val->intval = bq->init_data.vreg_max;
> + break;
> +
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = state.vbat_adc;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + val->intval = state.ibat_adc;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static bool bq25790_state_changed(struct bq25790_device *bq,
> + struct bq25790_state *new_state)
> +{
> + struct bq25790_state old_state;
> +
> + mutex_lock(&bq->lock);
> + old_state = bq->state;
> + mutex_unlock(&bq->lock);
> +
> + return (old_state.chrg_status != new_state->chrg_status ||
> + old_state.chrg_fault != new_state->chrg_fault ||
> + old_state.online != new_state->online ||
> + old_state.health != new_state->health ||
> + old_state.fault_0 != new_state->fault_0 ||
> + old_state.fault_1 != new_state->fault_1 ||
> + old_state.chrg_type != new_state->chrg_type ||
> + old_state.vsys_status != new_state->vsys_status ||
> + old_state.vbat_adc != new_state->vbat_adc ||
> + old_state.vbus_adc != new_state->vbus_adc ||
> + old_state.ibat_adc != new_state->ibat_adc);
> +}
> +
> +static irqreturn_t bq25790_irq_handler_thread(int irq, void *private)
> +{
> + struct bq25790_device *bq = private;
> + struct bq25790_state state;
> + int ret;
> +
> + ret = bq25790_get_state(bq, &state);
> + if (ret < 0)
> + goto irq_out;
> +
> + if (!bq25790_state_changed(bq, &state))
> + goto irq_out;
> +
> + mutex_lock(&bq->lock);
> + bq->state = state;
> + mutex_unlock(&bq->lock);
> +
> + power_supply_changed(bq->charger);
> +
> +irq_out:
> + return IRQ_HANDLED;
> +}
> +
> +static enum power_supply_property bq25790_power_supply_props[] = {
> + POWER_SUPPLY_PROP_MANUFACTURER,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> + POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_USB_TYPE,
> +};
> +
> +static enum power_supply_property bq25790_battery_props[] = {
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> +};
> +
> +static char *bq25790_charger_supplied_to[] = {
> + "main-battery",
> +};

why do you need this? Usually this information should come from
platform data (e.g. DT).

> +static int bq25790_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property prop)
> +{
> + switch (prop) {
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + case POWER_SUPPLY_PROP_STATUS:
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct power_supply_desc bq25790_power_supply_desc = {
> + .name = "bq25790-charger",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .usb_types = bq25790_usb_type,
> + .num_usb_types = ARRAY_SIZE(bq25790_usb_type),
> + .properties = bq25790_power_supply_props,
> + .num_properties = ARRAY_SIZE(bq25790_power_supply_props),
> + .get_property = bq25790_get_property,
> + .set_property = bq25790_set_property,
> + .property_is_writeable = bq25790_property_is_writeable,
> +};
> +
> +static const struct power_supply_desc bq25790_battery_desc = {
> + .name = "bq25790-battery",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .get_property = bq25790_battery_get_property,
> + .properties = bq25790_battery_props,
> + .num_properties = ARRAY_SIZE(bq25790_battery_props),
> +};
> +
> +static bool bq25790_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case BQ25790_ICO_I_LIM...BQ25790_FAULT_FLAG_1:
> + case BQ25790_ADC_IBUS...BQ25790_ADC_DM:
> + case BQ25790_CHRG_CTRL_0:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config bq25790_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = BQ25790_PART_INFO,
> + .reg_defaults = bq25790_reg_defs,
> + .num_reg_defaults = ARRAY_SIZE(bq25790_reg_defs),
> + .cache_type = REGCACHE_RBTREE,

There are no holes in the register map, so REGCACHE_FLAT
should be enough.

> + .volatile_reg = bq25790_is_volatile_reg,
> +};
> +
> +static int bq25790_power_supply_init(struct bq25790_device *bq,
> + struct device *dev)
> +{
> + struct power_supply_config psy_cfg = { .drv_data = bq,
> + .of_node = dev->of_node, };
> +
> + psy_cfg.supplied_to = bq25790_charger_supplied_to;
> + psy_cfg.num_supplicants = ARRAY_SIZE(bq25790_charger_supplied_to);
> +
> + bq->charger = devm_power_supply_register(bq->dev,
> + &bq25790_power_supply_desc,
> + &psy_cfg);
> + if (IS_ERR(bq->charger))
> + return -EINVAL;
> +
> + bq->battery = devm_power_supply_register(bq->dev,
> + &bq25790_battery_desc,
> + &psy_cfg);
> + if (IS_ERR(bq->battery))
> + return -EINVAL;
> + return 0;
> +}
> +
> +static int bq25790_hw_init(struct bq25790_device *bq)
> +{
> + struct power_supply_battery_info bat_info = { };
> + int wd_reg_val = BQ25790_WATCHDOG_DIS;
> + int wd_max_val = BQ25790_NUM_WD_VAL - 1;
> + int ret = 0;
> + int i;
> +
> + if (bq->watchdog_timer) {
> + if (bq->watchdog_timer >= bq25790_watchdog_time[wd_max_val])
> + wd_reg_val = wd_max_val;
> + else {
> + for (i = 0; i < wd_max_val; i++) {
> + if (bq->watchdog_timer > bq25790_watchdog_time[i] &&
> + bq->watchdog_timer < bq25790_watchdog_time[i + 1]) {
> + wd_reg_val = i;
> + break;
> + }
> + }
> + }
> + }
> +
> + ret = regmap_update_bits(bq->regmap, BQ25790_CHRG_CTRL_1,
> + BQ25790_WATCHDOG_MASK, wd_reg_val);
> + if (ret)
> + return ret;
> +
> + ret = power_supply_get_battery_info(bq->charger, &bat_info);
> + if (ret) {
> + dev_warn(bq->dev, "battery info missing, default values will be applied\n");
> +
> + bat_info.constant_charge_current_max_ua =
> + BQ25790_ICHRG_I_DEF_uA;
> +
> + bat_info.constant_charge_voltage_max_uv =
> + BQ25790_VREG_V_DEF_uV;
> +
> + bat_info.precharge_current_ua = BQ25790_PRECHRG_I_DEF_uA;
> + bat_info.charge_term_current_ua = BQ25790_TERMCHRG_I_DEF_uA;
> + bq->init_data.ichg_max = BQ25790_ICHRG_I_MAX_uA;
> + bq->init_data.vreg_max = BQ25790_VREG_V_MAX_uV;
> + } else {
> + bq->init_data.ichg_max =
> + bat_info.constant_charge_current_max_ua;
> +
> + bq->init_data.vreg_max =
> + bat_info.constant_charge_voltage_max_uv;
> + }
> +
> + ret = bq25790_set_ichrg_curr(bq,
> + bat_info.constant_charge_current_max_ua);
> + if (ret)
> + goto err_out;
> +
> + ret = bq25790_set_prechrg_curr(bq, bat_info.precharge_current_ua);
> + if (ret)
> + goto err_out;
> +
> + ret = bq25790_set_chrg_volt(bq,
> + bat_info.constant_charge_voltage_max_uv);
> + if (ret)
> + goto err_out;
> +
> + ret = bq25790_set_term_curr(bq, bat_info.charge_term_current_ua);
> + if (ret)
> + goto err_out;
> +
> + ret = bq25790_set_input_volt_lim(bq, bq->init_data.vlim);
> + if (ret)
> + goto err_out;
> +
> + ret = bq25790_set_input_curr_lim(bq, bq->init_data.ilim);
> + if (ret)
> + goto err_out;
> +
> +err_out:
> + return ret;

You need to call power_supply_put_battery_info(), since the
struct contains some pointers with allocated data.

> +}
> +
> +static int bq25790_parse_dt(struct bq25790_device *bq)
> +{
> + int ret;
> +
> + ret = device_property_read_u32(bq->dev, "ti,watchdog-timeout-ms",
> + &bq->watchdog_timer);
> + if (ret)
> + bq->watchdog_timer = BQ25790_WATCHDOG_DIS;
> +
> + if (bq->watchdog_timer > BQ25790_WATCHDOG_MAX ||
> + bq->watchdog_timer < BQ25790_WATCHDOG_DIS)
> + return -EINVAL;
> +
> + ret = device_property_read_u32(bq->dev,
> + "input-voltage-limit-microvolt",
> + &bq->init_data.vlim);
> + if (ret)
> + bq->init_data.vlim = BQ25790_VINDPM_DEF_uV;
> +
> + if (bq->init_data.vlim > BQ25790_VINDPM_V_MAX_uV ||
> + bq->init_data.vlim < BQ25790_VINDPM_V_MIN_uV)
> + return -EINVAL;
> +
> + ret = device_property_read_u32(bq->dev,
> + "input-current-limit-microamp",
> + &bq->init_data.ilim);
> + if (ret)
> + bq->init_data.ilim = BQ25790_IINDPM_DEF_uA;
> +
> + if (bq->init_data.ilim > BQ25790_IINDPM_I_MAX_uA ||
> + bq->init_data.ilim < BQ25790_IINDPM_I_MIN_uA)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int bq25790_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct bq25790_device *bq;
> + int ret;
> +
> + bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
> + if (!bq)
> + return -ENOMEM;
> +
> + bq->client = client;
> + bq->dev = dev;
> +
> + mutex_init(&bq->lock);
> +
> + strncpy(bq->model_name, id->name, I2C_NAME_SIZE);
> +
> + bq->regmap = devm_regmap_init_i2c(client, &bq25790_regmap_config);
> + if (IS_ERR(bq->regmap)) {
> + dev_err(dev, "Failed to allocate register map\n");
> + return PTR_ERR(bq->regmap);
> + }
> +
> + i2c_set_clientdata(client, bq);
> +
> + ret = bq25790_parse_dt(bq);
> + if (ret) {
> + dev_err(dev, "Failed to read device tree properties%d\n", ret);
> + return ret;
> + }
> +
> + /* OTG reporting */
> + bq->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> + if (!IS_ERR_OR_NULL(bq->usb2_phy)) {
> + INIT_WORK(&bq->usb_work, bq25790_usb_work);
> + bq->usb_nb.notifier_call = bq25790_usb_notifier;
> + usb_register_notifier(bq->usb2_phy, &bq->usb_nb);

You also need to unregister the usb notifiers on driver removal.
I suggest to use devm_add_action_or_reset():

static void bq25790_unregister_usb_notifier(void *data)
{
struct bq25790_device *bq = (struct bq25790_device *) data;

if (!IS_ERR_OR_NULL(bq->usb2_phy))
usb_unregister_notifier(bq->usb2_phy, &bq->usb_nb);

if (!IS_ERR_OR_NULL(bq->usb3_phy))
usb_unregister_notifier(bq->usb3_phy, &bq->usb_nb);
}

ret = devm_add_action_or_reset(dev, bq25790_unregister_usb_notifier, bq)
if (ret)
return ret;

-- Sebastian

> + }
> +
> + bq->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> + if (!IS_ERR_OR_NULL(bq->usb3_phy)) {
> + INIT_WORK(&bq->usb_work, bq25790_usb_work);
> + bq->usb_nb.notifier_call = bq25790_usb_notifier;
> + usb_register_notifier(bq->usb3_phy, &bq->usb_nb);
> + }
> +
> + if (client->irq) {
> + ret = devm_request_threaded_irq(dev, client->irq, NULL,
> + bq25790_irq_handler_thread,
> + IRQF_TRIGGER_FALLING |
> + IRQF_ONESHOT,
> + dev_name(&client->dev), bq);
> + if (ret)
> + goto error_out;
> + }
> +
> + ret = bq25790_power_supply_init(bq, dev);
> + if (ret) {
> + dev_err(dev, "Failed to register power supply\n");
> + goto error_out;
> + }
> +
> + ret = bq25790_hw_init(bq);
> + if (ret) {
> + dev_err(dev, "Cannot initialize the chip.\n");
> + goto error_out;
> + }
> +
> + return ret;
> +error_out:
> + if (!IS_ERR_OR_NULL(bq->usb2_phy))
> + usb_unregister_notifier(bq->usb2_phy, &bq->usb_nb);
> +
> + if (!IS_ERR_OR_NULL(bq->usb3_phy))
> + usb_unregister_notifier(bq->usb3_phy, &bq->usb_nb);
> + return ret;
> +}
> +
> +static const struct i2c_device_id bq25790_i2c_ids[] = {
> + { BQ25790_NAME, 0 },
> + { BQ25792_NAME, 1 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, bq25790_i2c_ids);
> +
> +static const struct of_device_id bq25790_of_match[] = {
> + { .compatible = "ti,bq25790", },
> + { .compatible = "ti,bq25792", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bq25790_of_match);
> +
> +static const struct acpi_device_id bq25790_acpi_match[] = {
> + {BQ25790_NAME, 0},
> + {BQ25792_NAME, 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, bq25790_acpi_match);
> +
> +static struct i2c_driver bq25790_driver = {
> + .driver = {
> + .name = "bq25790-charger",
> + .of_match_table = bq25790_of_match,
> + .acpi_match_table = ACPI_PTR(bq25790_acpi_match),
> + },
> + .probe = bq25790_probe,
> + .id_table = bq25790_i2c_ids,
> +};
> +module_i2c_driver(bq25790_driver);
> +
> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
> +MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>");
> +MODULE_DESCRIPTION("bq25790 charger driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/power/supply/bq25790_charger.h b/drivers/power/supply/bq25790_charger.h
> new file mode 100644
> index 000000000000..77234e116a6b
> --- /dev/null
> +++ b/drivers/power/supply/bq25790_charger.h
> @@ -0,0 +1,150 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +// BQ25790 Charger Driver
> +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#ifndef _BQ25790_CHARGER_H
> +#define _BQ25790_CHARGER_H
> +
> +#define BQ25790_MANUFACTURER "Texas Instruments"
> +#define BQ25790_NAME "bq25790"
> +#define BQ25792_NAME "bq25792"
> +
> +#define BQ25790_MIN_SYS_V 0x00
> +#define BQ25790_CHRG_V_LIM_MSB 0x01
> +#define BQ25790_CHRG_V_LIM_LSB 0x02
> +#define BQ25790_CHRG_I_LIM_MSB 0x03
> +#define BQ25790_CHRG_I_LIM_LSB 0x04
> +#define BQ25790_INPUT_V_LIM 0x05
> +#define BQ25790_INPUT_I_LIM_MSB 0x06
> +#define BQ25790_INPUT_I_LIM_LSB 0x07
> +#define BQ25790_PRECHRG_CTRL 0x08
> +#define BQ25790_TERM_CTRL 0x09
> +#define BQ25790_RECHRG_CTRL 0x0a
> +#define BQ25790_VOTG_REG 0x0b
> +#define BQ25790_IOTG_REG 0x0d
> +#define BQ25790_TIMER_CTRL 0x0e
> +#define BQ25790_CHRG_CTRL_0 0x0f
> +#define BQ25790_CHRG_CTRL_1 0x10
> +#define BQ25790_CHRG_CTRL_2 0x11
> +#define BQ25790_CHRG_CTRL_3 0x12
> +#define BQ25790_CHRG_CTRL_4 0x13
> +#define BQ25790_CHRG_CTRL_5 0x14
> +#define BQ25790_MPPT_CTRL 0x15
> +#define BQ25790_TEMP_CTRL 0x16
> +#define BQ25790_NTC_CTRL_0 0x17
> +#define BQ25790_NTC_CTRL_1 0x18
> +#define BQ25790_ICO_I_LIM 0x19
> +#define BQ25790_CHRG_STAT_0 0x1b
> +#define BQ25790_CHRG_STAT_1 0x1c
> +#define BQ25790_CHRG_STAT_2 0x1d
> +#define BQ25790_CHRG_STAT_3 0x1e
> +#define BQ25790_CHRG_STAT_4 0x1f
> +#define BQ25790_FAULT_STAT_0 0x20
> +#define BQ25790_FAULT_STAT_1 0x21
> +#define BQ25790_CHRG_FLAG_0 0x22
> +#define BQ25790_CHRG_FLAG_1 0x23
> +#define BQ25790_CHRG_FLAG_2 0x24
> +#define BQ25790_CHRG_FLAG_3 0x25
> +#define BQ25790_FAULT_FLAG_0 0x26
> +#define BQ25790_FAULT_FLAG_1 0x27
> +#define BQ25790_CHRG_MSK_0 0x28
> +#define BQ25790_CHRG_MSK_1 0x29
> +#define BQ25790_CHRG_MSK_2 0x2a
> +#define BQ25790_CHRG_MSK_3 0x2b
> +#define BQ25790_FAULT_MSK_0 0x2c
> +#define BQ25790_FAULT_MSK_1 0x2d
> +#define BQ25790_ADC_CTRL 0x2e
> +#define BQ25790_FN_DISABE_0 0x2f
> +#define BQ25790_FN_DISABE_1 0x30
> +#define BQ25790_ADC_IBUS 0x31
> +#define BQ25790_ADC_IBAT_MSB 0x33
> +#define BQ25790_ADC_IBAT_LSB 0x34
> +#define BQ25790_ADC_VBUS_MSB 0x35
> +#define BQ25790_ADC_VBUS_LSB 0x36
> +#define BQ25790_ADC_VAC1 0x37
> +#define BQ25790_ADC_VAC2 0x39
> +#define BQ25790_ADC_VBAT_MSB 0x3b
> +#define BQ25790_ADC_VBAT_LSB 0x3c
> +#define BQ25790_ADC_VSYS_MSB 0x3d
> +#define BQ25790_ADC_VSYS_LSB 0x3e
> +#define BQ25790_ADC_TS 0x3f
> +#define BQ25790_ADC_TDIE 0x41
> +#define BQ25790_ADC_DP 0x43
> +#define BQ25790_ADC_DM 0x45
> +#define BQ25790_DPDM_DRV 0x47
> +#define BQ25790_PART_INFO 0x48
> +
> +#define BQ25790_CHRG_EN BIT(5)
> +#define BQ25790_ADC_EN BIT(7)
> +
> +/* Charger Status 1 */
> +#define BQ25790_CHG_STAT_MSK GENMASK(7, 5)
> +#define BQ25790_NOT_CHRGING 0
> +#define BQ25790_TRICKLE_CHRG BIT(5)
> +#define BQ25790_PRECHRG BIT(6)
> +#define BQ25790_FAST_CHRG (BIT(5) | BIT(6))
> +#define BQ25790_TAPER_CHRG BIT(7)
> +#define BQ25790_TOP_OFF_CHRG (BIT(6) | BIT(7))
> +#define BQ25790_TERM_CHRG (BIT(5) | BIT(6) | BIT(7))
> +#define BQ25790_VBUS_PRESENT BIT(0)
> +
> +#define BQ25790_VBUS_STAT_MSK GENMASK(4, 1)
> +#define BQ25790_USB_SDP BIT(1)
> +#define BQ25790_USB_CDP BIT(2)
> +#define BQ25790_USB_DCP (BIT(1) | BIT(2))
> +#define BQ25790_HVDCP BIT(3)
> +#define BQ25790_UNKNOWN_3A (BIT(3) | BIT(1))
> +#define BQ25790_NON_STANDARD (BIT(3) | BIT(2))
> +#define BQ25790_OTG_MODE (BIT(3) | BIT(2) | BIT(1))
> +#define BQ25790_UNQUAL_ADAPT BIT(4)
> +#define BQ25790_DIRECT_PWR (BIT(4) | BIT(2) | BIT(1))
> +
> +/* Charger Status 4 */
> +#define BQ25790_TEMP_HOT BIT(0)
> +#define BQ25790_TEMP_WARM BIT(1)
> +#define BQ25790_TEMP_COOL BIT(2)
> +#define BQ25790_TEMP_COLD BIT(3)
> +#define BQ25790_TEMP_MASK GENMASK(3, 0)
> +
> +#define BQ25790_OTG_OVP BIT(5)
> +#define BQ25790_VSYS_OVP BIT(6)
> +#define BQ25790_VSYS_STAT BIT(4)
> +
> +#define BQ25790_PRECHRG_CUR_MASK GENMASK(5, 0)
> +#define BQ25790_PRECHRG_CURRENT_STEP_uA 40000
> +#define BQ25790_PRECHRG_I_MIN_uA 40000
> +#define BQ25790_PRECHRG_I_MAX_uA 2000000
> +#define BQ25790_PRECHRG_I_DEF_uA 120000
> +#define BQ25790_TERMCHRG_CUR_MASK GENMASK(4, 0)
> +#define BQ25790_TERMCHRG_CURRENT_STEP_uA 40000
> +#define BQ25790_TERMCHRG_I_MIN_uA 40000
> +#define BQ25790_TERMCHRG_I_MAX_uA 1000000
> +#define BQ25790_TERMCHRG_I_DEF_uA 200000
> +#define BQ25790_ICHRG_CURRENT_STEP_uA 10000
> +#define BQ25790_ICHRG_I_MIN_uA 50000
> +#define BQ25790_ICHRG_I_MAX_uA 5000000
> +#define BQ25790_ICHRG_I_DEF_uA 1000000
> +
> +#define BQ25790_VREG_V_MAX_uV 18800000
> +#define BQ25790_VREG_V_MIN_uV 3000000
> +#define BQ25790_VREG_V_DEF_uV 3600000
> +#define BQ25790_VREG_V_STEP_uV 10000
> +
> +#define BQ25790_IINDPM_I_MIN_uA 100000
> +#define BQ25790_IINDPM_I_MAX_uA 3300000
> +#define BQ25790_IINDPM_STEP_uA 10000
> +#define BQ25790_IINDPM_DEF_uA 1000000
> +
> +#define BQ25790_VINDPM_V_MIN_uV 3600000
> +#define BQ25790_VINDPM_V_MAX_uV 22000000
> +#define BQ25790_VINDPM_STEP_uV 100000
> +#define BQ25790_VINDPM_DEF_uV 3600000
> +
> +#define BQ25790_ADC_VOLT_STEP_uV 1000
> +#define BQ25790_ADC_CURR_STEP_uA 1000
> +
> +#define BQ25790_WATCHDOG_MASK GENMASK(2, 0)
> +#define BQ25790_WATCHDOG_DIS 0
> +#define BQ25790_WATCHDOG_MAX 160000
> +
> +#endif /* _BQ25790_CHARGER_H */
> --
> 2.28.0.585.ge1cfff676549
>

Attachment: signature.asc
Description: PGP signature