Re: Registering IRQ for MT7530 internal PHYs

[Heiner Kallweit]

On 30.12.2020 05:22, DENG Qingfang wrote:
> Hi,
> 
> I added MT7530 IRQ support and registered its internal PHYs to IRQ.
> It works but my patch used two hacks.
> 
> 1. Removed phy_drv_supports_irq check, because config_intr and
> handle_interrupt are not set for Generic PHY.
> 
I don't think that's the best option. First, did you check which
consequences this has? The check is there for a reason.
You may want to add a PHY driver for your chip. Supposedly it
supports at least PHY suspend/resume. You can use the RTL8366RB
PHY driver as template.

> 2. Allocated ds->slave_mii_bus before calling ds->ops->setup, because
> we cannot call dsa_slave_mii_bus_init which is private.
> 
> Any better ideas?
> 
> Regards,
> Qingfang
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index a67cac15a724..d59a8c50ede3 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -10,6 +10,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/module.h>
>  #include <linux/netdevice.h>
> +#include <linux/of_irq.h>
>  #include <linux/of_mdio.h>
>  #include <linux/of_net.h>
>  #include <linux/of_platform.h>
> @@ -1639,6 +1640,125 @@ mtk_get_tag_protocol(struct dsa_switch *ds, int port,
>  	}
>  }
>  
> +static irqreturn_t
> +mt7530_irq(int irq, void *data)
> +{
> +	struct mt7530_priv *priv = data;
> +	bool handled = false;
> +	int phy;
> +	u32 val;
> +
> +	val = mt7530_read(priv, MT7530_SYS_INT_STS);
> +	mt7530_write(priv, MT7530_SYS_INT_STS, val);
> +
> +	dev_info_ratelimited(priv->dev, "interrupt status: 0x%08x\n", val);
> +	dev_info_ratelimited(priv->dev, "interrupt enable: 0x%08x\n", mt7530_read(priv, MT7530_SYS_INT_EN));
> +
This is debug code to be removed in the final version?

> +	for (phy = 0; phy < MT7530_NUM_PHYS; phy++) {
> +		if (val & BIT(phy)) {
> +			unsigned int child_irq;
> +
> +			child_irq = irq_find_mapping(priv->irq_domain, phy);
> +			handle_nested_irq(child_irq);
> +			handled = true;
> +		}
> +	}
> +
> +	return handled ? IRQ_HANDLED : IRQ_NONE;

IRQ_RETVAL() could be used here.

> +}
> +
> +static void mt7530_irq_mask(struct irq_data *d)
> +{
> +	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
> +
> +	priv->irq_enable &= ~BIT(d->hwirq);

Here you don't actually do something. HW doesn't support masking
interrupt generation for a port?

> +}
> +
> +static void mt7530_irq_unmask(struct irq_data *d)
> +{
> +	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
> +
> +	priv->irq_enable |= BIT(d->hwirq);
> +}
> +
> +static void mt7530_irq_bus_lock(struct irq_data *d)
> +{
> +	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
> +
> +	mutex_lock(&priv->reg_mutex);
> +}
> +
> +static void mt7530_irq_bus_sync_unlock(struct irq_data *d)
> +{
> +	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
> +
> +	mt7530_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
> +	mutex_unlock(&priv->reg_mutex);
> +}
> +
> +static struct irq_chip mt7530_irq_chip = {
> +	.name = MT7530_NAME,
> +	.irq_mask = mt7530_irq_mask,
> +	.irq_unmask = mt7530_irq_unmask,
> +	.irq_bus_lock = mt7530_irq_bus_lock,
> +	.irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock,
> +};
> +
> +static int
> +mt7530_irq_map(struct irq_domain *domain, unsigned int irq,
> +	       irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_data(irq, domain->host_data);
> +	irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq);
> +	irq_set_noprobe(irq);
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops mt7530_irq_domain_ops = {
> +	.map = mt7530_irq_map,
> +	.xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void
> +mt7530_irq_init(struct mt7530_priv *priv)
> +{
> +	struct mii_bus *bus = priv->ds->slave_mii_bus;
> +	struct device *dev = priv->dev;
> +	struct device_node *np = dev->of_node;
> +	int parent_irq;
> +	int phy, ret;
> +
> +	parent_irq = of_irq_get(np, 0);
> +	if (parent_irq <= 0) {
> +		dev_err(dev, "failed to get parent IRQ: %d\n", parent_irq);
> +		return;
> +	}
> +
> +	mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
> +	ret = devm_request_threaded_irq(dev, parent_irq, NULL, mt7530_irq,
> +					IRQF_ONESHOT, MT7530_NAME, priv);
> +	if (ret) {
> +		dev_err(dev, "failed to request IRQ: %d\n", ret);
> +		return;
> +	}
> +
> +	priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
> +						&mt7530_irq_domain_ops, priv);
> +	if (!priv->irq_domain) {
> +		dev_err(dev, "failed to create IRQ domain\n");
> +		return;
> +	}
> +
> +	/* IRQ for internal PHYs */
> +	for (phy = 0; phy < MT7530_NUM_PHYS; phy++) {
> +		unsigned int irq = irq_create_mapping(priv->irq_domain, phy);
> +
> +		irq_set_parent(irq, parent_irq);
> +		bus->irq[phy] = irq;
> +	}
> +}
> +
>  static int
>  mt7530_setup(struct dsa_switch *ds)
>  {
> @@ -2578,8 +2698,13 @@ static int
>  mt753x_setup(struct dsa_switch *ds)
>  {
>  	struct mt7530_priv *priv = ds->priv;
> +	int ret =  priv->info->sw_setup(ds);
>  
> -	return priv->info->sw_setup(ds);
> +	/* Setup interrupt */
> +	if (!ret)
> +		mt7530_irq_init(priv);
> +
> +	return ret;
>  }
>  
>  static int
> @@ -2780,6 +2905,9 @@ mt7530_remove(struct mdio_device *mdiodev)
>  		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
>  			ret);
>  
> +	if (priv->irq_domain)
> +		irq_domain_remove(priv->irq_domain);
> +
>  	dsa_unregister_switch(priv->ds);
>  	mutex_destroy(&priv->reg_mutex);
>  }
> @@ -2788,7 +2916,7 @@ static struct mdio_driver mt7530_mdio_driver = {
>  	.probe  = mt7530_probe,
>  	.remove = mt7530_remove,
>  	.mdiodrv.driver = {
> -		.name = "mt7530",
> +		.name = MT7530_NAME,
>  		.of_match_table = mt7530_of_match,
>  	},
>  };
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index 32d8969b3ace..b1988d8085bb 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -6,7 +6,10 @@
>  #ifndef __MT7530_H
>  #define __MT7530_H
>  
> +#define MT7530_NAME			"mt7530"
> +
>  #define MT7530_NUM_PORTS		7
> +#define MT7530_NUM_PHYS			5
>  #define MT7530_CPU_PORT			6
>  #define MT7530_NUM_FDB_RECORDS		2048
>  #define MT7530_ALL_MEMBERS		0xff
> @@ -380,6 +383,12 @@ enum mt7531_sgmii_force_duplex {
>  #define  SYS_CTRL_SW_RST		BIT(1)
>  #define  SYS_CTRL_REG_RST		BIT(0)
>  
> +/* Register for system interrupt */
> +#define MT7530_SYS_INT_EN		0x7008
> +
> +/* Register for system interrupt status */
> +#define MT7530_SYS_INT_STS		0x700c
> +
>  /* Register for PHY Indirect Access Control */
>  #define MT7531_PHY_IAC			0x701C
>  #define  MT7531_PHY_ACS_ST		BIT(31)
> @@ -761,6 +770,8 @@ struct mt7530_priv {
>  	struct mt7530_port	ports[MT7530_NUM_PORTS];
>  	/* protect among processes for registers access*/
>  	struct mutex reg_mutex;
> +	struct irq_domain *irq_domain;
> +	u32 irq_enable;
>  };
>  
>  struct mt7530_hw_vlan_entry {
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 80c2e646c093..cdddc27e2df7 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -2846,12 +2846,6 @@ static int phy_probe(struct device *dev)
>  
>  	phydev->drv = phydrv;
>  
> -	/* Disable the interrupt if the PHY doesn't support it
> -	 * but the interrupt is still a valid one
> -	 */
> -	 if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
> -		phydev->irq = PHY_POLL;
> -
>  	if (phydrv->flags & PHY_IS_INTERNAL)
>  		phydev->is_internal = true;
>  
> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
> index 183003e45762..ef5db1106581 100644
> --- a/net/dsa/dsa2.c
> +++ b/net/dsa/dsa2.c
> @@ -448,19 +448,19 @@ static int dsa_switch_setup(struct dsa_switch *ds)
>  	if (err)
>  		goto unregister_devlink_ports;
>  
> +	ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
> +	if (!ds->slave_mii_bus) {
> +		err = -ENOMEM;
> +		goto unregister_notifier;
> +	}
> +
>  	err = ds->ops->setup(ds);
>  	if (err < 0)
>  		goto unregister_notifier;
>  
>  	devlink_params_publish(ds->devlink);
>  
> -	if (!ds->slave_mii_bus && ds->ops->phy_read) {
> -		ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
> -		if (!ds->slave_mii_bus) {
> -			err = -ENOMEM;
> -			goto unregister_notifier;
> -		}
> -
> +	if (ds->ops->phy_read) {
>  		dsa_slave_mii_bus_init(ds);
>  
>  		err = mdiobus_register(ds->slave_mii_bus);
>