Re: [PATCH v2 2/2] arm64: dts: meson: add initial Beelink GS-King-X device-tree

[Martin Blumenstingl]

On Wed, Dec 30, 2020 at 11:38 AM Christian Hewitt
<christianshewitt@xxxxxxxxx> wrote:
>
> The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
> board with an S922X-H chip.
>
> - 4GB LPDDR4 RAM
> - 64GB eMMC storage
> - 10/100/1000 Base-T Ethernet
> - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
> - HDMI 2.1 video
> - S/PDIF optical output
are you planning to enable this also?

> - 2x ESS9018 audio DACs
> - 4x Ricor RT6862 audio amps
> - Analogue headphone output
there's no driver for that DAC so I think that's why you are not enabling them

> - 1x USB 2.0 OTG port
> - 3x USB 3.0 ports
> - IR receiver
> - 1x micro SD card slot (internal)
> - USB SATA controller with 2x 3.5" drive bays
> - 1x Power on/off button
>
> Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
I don't know/have this board but also I don't see anything problematic so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>